Firmware Term Log Information on controller 0: T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#09407-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#09408-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#09409-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 97 % T3: Absolute State of Charge : 50 % T3: Remaining Capacity : 956 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 23 C Voltage : 4018 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 956 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 97 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#09410-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T5: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T5: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#09411-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#09412-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#09413-T22: 91=Inserted: Encl PD 20 T22: EVT#09414-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#09415-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#09416-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#09417-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#09418-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#09419-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#09420-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#09421-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#09422-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#09423-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#09424-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T28: EVT#09425-T28: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T28: EVT#09426-T28: 249=VD 01/1 is now OPTIMAL T28: Memory End affffff0 T28: Total memory available for disk cache: e6efbf0 T28: Total Number of Cache Lines 3648 T28: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T28: Cache initialization complete...Config info T28: ARs configured: 2 T28: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T28: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T28: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T28: span 0: sBlk=00000000, nBlk=11040000, ar=0 T28: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T28: span 0: sBlk=00000000, nBlk=74600000, ar=1 T28: Contiguous Triplet Usage: SS[64K]=0 T28: pdFailHistInit: count=0 T28: pdFailHistInit: count=0 T28: Initializing write journal entries T28: NOT Flushing Cache T28: EVT#09427-T28: 53=Background Initialization started on VD 01/1 T28: RMW: NVRAM structure valid - checking for active RMWs T28: DDF_TimestampGet: using nvram time=08/06 20:13:51 + rtc=28 to set timestamp 08/07/10 7:23:33: EVT#09428-08/07/10 7:23:33: 44=Time established as 08/07/10 7:23:33; (29 seconds since power on) 08/07/10 7:23:34: prDiskStart: starting Patrol Read on PD=00 08/07/10 7:23:34: prDiskStart: starting Patrol Read on PD=01 08/07/10 7:23:34: prDiskCheckOkToRun: PR cannot run on this pd=2 init or CC running ld=1 08/07/10 7:23:34: prDiskCheckOkToRun: PR cannot run on this pd=3 init or CC running ld=1 08/07/10 7:23:34: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 08/07/10 7:23:34: EVT#09429-08/07/10 7:23:34: 39=Patrol Read started 08/07/10 7:23:48: EVT#09430-08/07/10 7:23:48: 52=Background Initialization progress on VD 01/1 is 33.46%(16s) 08/07/10 7:24:02: MfiCmdInitQueue: FW now OPERATIONAL 08/07/10 7:24:02: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 08/07/10 7:24:02: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 08/07/10 7:24:02: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 08/07/10 7:24:02: producerIndex=0 08/07/10 7:24:12: EVT#09431-08/07/10 7:24:12: 149=Battery temperature is normal 08/07/10 7:24:12: EVT#09432-08/07/10 7:24:12: 147=Battery started charging 08/07/10 7:24:12: EVT#09433-08/07/10 7:24:12: 163=Current capacity of the battery is above threshold 08/07/10 7:27:55: EVT#09434-08/07/10 7:27:55: 52=Background Initialization progress on VD 01/1 is 33.57%(263s) 08/07/10 7:28:51: EVT#09435-08/07/10 7:28:51: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(317s) 08/07/10 7:29:07: EVT#09436-08/07/10 7:29:07: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(333s) 08/07/10 7:33:16: EVT#09437-08/07/10 7:33:16: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(582s) 08/07/10 7:33:23: EVT#09438-08/07/10 7:33:23: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(589s) 08/07/10 7:37:55: EVT#09439-08/07/10 7:37:55: 52=Background Initialization progress on VD 01/1 is 33.82%(863s) 08/07/10 7:38:06: EVT#09440-08/07/10 7:38:06: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(872s) 08/07/10 7:38:22: EVT#09441-08/07/10 7:38:22: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(888s) 08/07/10 7:39:22: EVT#09442-08/07/10 7:39:22: 242=Battery charge complete 08/07/10 7:41:54: EVT#09443-08/07/10 7:41:54: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(1100s) 08/07/10 7:42:02: EVT#09444-08/07/10 7:42:02: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(1108s) 08/07/10 7:45:57: EVT#09445-08/07/10 7:45:57: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(1343s) 08/07/10 7:46:29: EVT#09446-08/07/10 7:46:29: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(1375s) 08/07/10 7:47:57: EVT#09447-08/07/10 7:47:57: 52=Background Initialization progress on VD 01/1 is 34.07%(1465s) 08/07/10 7:50:37: EVT#09448-08/07/10 7:50:37: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(1623s) 08/07/10 7:50:52: EVT#09449-08/07/10 7:50:52: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(1638s) 08/07/10 7:55:17: EVT#09450-08/07/10 7:55:17: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1903s) 08/07/10 7:55:33: EVT#09451-08/07/10 7:55:33: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1919s) 08/07/10 7:58:18: EVT#09452-08/07/10 7:58:18: 52=Background Initialization progress on VD 01/1 is 34.32%(2086s) 08/07/10 7:59:56: EVT#09453-08/07/10 7:59:56: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(2182s) 08/07/10 8:00:28: EVT#09454-08/07/10 8:00:28: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(2214s) 08/07/10 8:05:52: EVT#09455-08/07/10 8:05:52: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(2538s) 08/07/10 8:06:08: EVT#09456-08/07/10 8:06:08: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(2554s) 08/07/10 8:08:33: EVT#09457-08/07/10 8:08:33: 52=Background Initialization progress on VD 01/1 is 34.57%(2701s) 08/07/10 8:12:09: EVT#09458-08/07/10 8:12:09: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(2915s) 08/07/10 8:12:09: prCallback: PR completed for pd=01 08/07/10 8:12:24: EVT#09459-08/07/10 8:12:24: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(2930s) 08/07/10 8:12:24: prCallback: PR completed for pd=00 08/07/10 8:12:24: PR cycle complete 08/07/10 8:12:24: EVT#09460-08/07/10 8:12:24: 35=Patrol Read complete 08/07/10 8:12:24: Next PR scheduled to start at 08/14/10 3:00:00 08/07/10 8:18:48: EVT#09461-08/07/10 8:18:48: 52=Background Initialization progress on VD 01/1 is 34.82%(3316s) 08/07/10 8:28:56: EVT#09462-08/07/10 8:28:56: 52=Background Initialization progress on VD 01/1 is 35.06%(3924s) 08/07/10 8:38:49: EVT#09463-08/07/10 8:38:49: 52=Background Initialization progress on VD 01/1 is 35.31%(4517s) 08/07/10 8:48:37: EVT#09464-08/07/10 8:48:37: 52=Background Initialization progress on VD 01/1 is 35.56%(5105s) 08/07/10 8:58:36: EVT#09465-08/07/10 8:58:36: 52=Background Initialization progress on VD 01/1 is 35.81%(5704s) 08/07/10 9:08:26: EVT#09466-08/07/10 9:08:26: 52=Background Initialization progress on VD 01/1 is 36.06%(6294s) 08/07/10 9:18:16: EVT#09467-08/07/10 9:18:16: 52=Background Initialization progress on VD 01/1 is 36.31%(6884s) 08/07/10 9:28:11: EVT#09468-08/07/10 9:28:11: 52=Background Initialization progress on VD 01/1 is 36.56%(7479s) 08/07/10 9:38:44: EVT#09469-08/07/10 9:38:44: 52=Background Initialization progress on VD 01/1 is 36.81%(8112s) 08/07/10 10:00:35: EVT#09470-08/07/10 10:00:35: 52=Background Initialization progress on VD 01/1 is 37.05%(9423s) 08/07/10 10:10:17: EVT#09471-08/07/10 10:10:17: 52=Background Initialization progress on VD 01/1 is 37.30%(10005s) 08/07/10 10:20:08: EVT#09472-08/07/10 10:20:08: 52=Background Initialization progress on VD 01/1 is 37.55%(10596s) 08/07/10 10:29:55: EVT#09473-08/07/10 10:29:55: 52=Background Initialization progress on VD 01/1 is 37.80%(11183s) 08/07/10 10:39:55: EVT#09474-08/07/10 10:39:55: 52=Background Initialization progress on VD 01/1 is 38.05%(11783s) 08/07/10 10:49:41: EVT#09475-08/07/10 10:49:41: 52=Background Initialization progress on VD 01/1 is 38.30%(12369s) 08/07/10 10:59:44: EVT#09476-08/07/10 10:59:44: 52=Background Initialization progress on VD 01/1 is 38.55%(12972s) 08/07/10 11:09:38: EVT#09477-08/07/10 11:09:38: 52=Background Initialization progress on VD 01/1 is 38.80%(13566s) 08/07/10 11:19:47: EVT#09478-08/07/10 11:19:47: 52=Background Initialization progress on VD 01/1 is 39.04%(14175s) 08/07/10 11:29:53: EVT#09479-08/07/10 11:29:53: 52=Background Initialization progress on VD 01/1 is 39.29%(14781s) 08/07/10 11:40:05: EVT#09480-08/07/10 11:40:05: 52=Background Initialization progress on VD 01/1 is 39.54%(15393s) 08/07/10 11:50:10: EVT#09481-08/07/10 11:50:10: 52=Background Initialization progress on VD 01/1 is 39.79%(15998s) 08/07/10 12:00:25: EVT#09482-08/07/10 12:00:25: 52=Background Initialization progress on VD 01/1 is 40.04%(16613s) 08/07/10 12:10:37: EVT#09483-08/07/10 12:10:37: 52=Background Initialization progress on VD 01/1 is 40.29%(17225s) 08/07/10 12:20:50: EVT#09484-08/07/10 12:20:50: 52=Background Initialization progress on VD 01/1 is 40.54%(17838s) 08/07/10 12:31:07: EVT#09485-08/07/10 12:31:07: 52=Background Initialization progress on VD 01/1 is 40.79%(18455s) 08/07/10 12:41:17: EVT#09486-08/07/10 12:41:17: 52=Background Initialization progress on VD 01/1 is 41.03%(19065s) 08/07/10 12:51:42: EVT#09487-08/07/10 12:51:42: 52=Background Initialization progress on VD 01/1 is 41.28%(19690s) 08/07/10 13:01:56: EVT#09488-08/07/10 13:01:56: 52=Background Initialization progress on VD 01/1 is 41.53%(20304s) 08/07/10 13:12:17: EVT#09489-08/07/10 13:12:17: 52=Background Initialization progress on VD 01/1 is 41.78%(20925s) 08/07/10 13:22:38: EVT#09490-08/07/10 13:22:38: 52=Background Initialization progress on VD 01/1 is 42.03%(21546s) 08/07/10 13:32:57: EVT#09491-08/07/10 13:32:57: 52=Background Initialization progress on VD 01/1 is 42.28%(22165s) 08/07/10 13:43:27: EVT#09492-08/07/10 13:43:27: 52=Background Initialization progress on VD 01/1 is 42.53%(22795s) 08/07/10 13:53:55: EVT#09493-08/07/10 13:53:55: 52=Background Initialization progress on VD 01/1 is 42.78%(23423s) 08/07/10 14:04:18: EVT#09494-08/07/10 14:04:18: 52=Background Initialization progress on VD 01/1 is 43.02%(24046s) 08/07/10 14:14:58: EVT#09495-08/07/10 14:14:58: 52=Background Initialization progress on VD 01/1 is 43.27%(24686s) 08/07/10 14:25:27: EVT#09496-08/07/10 14:25:27: 52=Background Initialization progress on VD 01/1 is 43.52%(25315s) 08/07/10 14:35:58: EVT#09497-08/07/10 14:35:58: 52=Background Initialization progress on VD 01/1 is 43.77%(25946s) 08/07/10 14:46:39: EVT#09498-08/07/10 14:46:39: 52=Background Initialization progress on VD 01/1 is 44.02%(26587s) 08/07/10 14:57:13: EVT#09499-08/07/10 14:57:13: 52=Background Initialization progress on VD 01/1 is 44.27%(27221s) 08/07/10 15:07:54: EVT#09500-08/07/10 15:07:54: 52=Background Initialization progress on VD 01/1 is 44.52%(27862s) 08/07/10 15:18:38: EVT#09501-08/07/10 15:18:38: 52=Background Initialization progress on VD 01/1 is 44.76%(28506s) 08/07/10 15:29:09: EVT#09502-08/07/10 15:29:09: 52=Background Initialization progress on VD 01/1 is 45.01%(29137s) 08/07/10 15:39:48: EVT#09503-08/07/10 15:39:48: 52=Background Initialization progress on VD 01/1 is 45.26%(29776s) 08/07/10 15:50:27: EVT#09504-08/07/10 15:50:27: 52=Background Initialization progress on VD 01/1 is 45.51%(30415s) 08/07/10 16:01:02: EVT#09505-08/07/10 16:01:02: 52=Background Initialization progress on VD 01/1 is 45.76%(31050s) 08/07/10 16:11:43: EVT#09506-08/07/10 16:11:43: 52=Background Initialization progress on VD 01/1 is 46.01%(31691s) 08/07/10 16:22:34: EVT#09507-08/07/10 16:22:34: 52=Background Initialization progress on VD 01/1 is 46.26%(32342s) 08/07/10 16:33:11: EVT#09508-08/07/10 16:33:11: 52=Background Initialization progress on VD 01/1 is 46.51%(32979s) 08/07/10 16:43:56: EVT#09509-08/07/10 16:43:56: 52=Background Initialization progress on VD 01/1 is 46.75%(33624s) 08/07/10 16:54:51: EVT#09510-08/07/10 16:54:51: 52=Background Initialization progress on VD 01/1 is 47.00%(34279s) 08/07/10 17:05:26: EVT#09511-08/07/10 17:05:26: 52=Background Initialization progress on VD 01/1 is 47.25%(34914s) 08/07/10 17:16:15: EVT#09512-08/07/10 17:16:15: 52=Background Initialization progress on VD 01/1 is 47.50%(35563s) 08/07/10 17:27:04: EVT#09513-08/07/10 17:27:04: 52=Background Initialization progress on VD 01/1 is 47.75%(36212s) 08/07/10 17:37:40: EVT#09514-08/07/10 17:37:40: 52=Background Initialization progress on VD 01/1 is 48.00%(36848s) 08/07/10 17:48:30: EVT#09515-08/07/10 17:48:30: 52=Background Initialization progress on VD 01/1 is 48.25%(37498s) 08/07/10 17:59:18: EVT#09516-08/07/10 17:59:18: 52=Background Initialization progress on VD 01/1 is 48.50%(38146s) 08/07/10 18:10:09: EVT#09517-08/07/10 18:10:09: 52=Background Initialization progress on VD 01/1 is 48.74%(38797s) 08/07/10 18:20:52: EVT#09518-08/07/10 18:20:52: 52=Background Initialization progress on VD 01/1 is 48.99%(39440s) 08/07/10 18:31:20: EVT#09519-08/07/10 18:31:20: 52=Background Initialization progress on VD 01/1 is 49.24%(40068s) 08/07/10 18:42:08: EVT#09520-08/07/10 18:42:08: 52=Background Initialization progress on VD 01/1 is 49.49%(40716s) 08/07/10 18:53:07: EVT#09521-08/07/10 18:53:07: 52=Background Initialization progress on VD 01/1 is 49.74%(41375s) 08/07/10 19:03:43: EVT#09522-08/07/10 19:03:43: 52=Background Initialization progress on VD 01/1 is 49.99%(42011s) 08/07/10 19:14:49: EVT#09523-08/07/10 19:14:49: 52=Background Initialization progress on VD 01/1 is 50.24%(42677s) 08/07/10 19:26:13: EVT#09524-08/07/10 19:26:13: 52=Background Initialization progress on VD 01/1 is 50.49%(43361s) 08/07/10 19:37:12: EVT#09525-08/07/10 19:37:12: 52=Background Initialization progress on VD 01/1 is 50.73%(44020s) 08/07/10 19:48:02: EVT#09526-08/07/10 19:48:02: 52=Background Initialization progress on VD 01/1 is 50.98%(44670s) 08/07/10 19:58:52: EVT#09527-08/07/10 19:58:52: 52=Background Initialization progress on VD 01/1 is 51.23%(45320s) 08/07/10 20:09:52: EVT#09528-08/07/10 20:09:52: 52=Background Initialization progress on VD 01/1 is 51.48%(45980s) 08/07/10 20:20:53: EVT#09529-08/07/10 20:20:53: 52=Background Initialization progress on VD 01/1 is 51.73%(46641s) 08/07/10 20:31:53: EVT#09530-08/07/10 20:31:53: 52=Background Initialization progress on VD 01/1 is 51.98%(47301s) 08/07/10 20:42:32: EVT#09531-08/07/10 20:42:32: 52=Background Initialization progress on VD 01/1 is 52.23%(47940s) 08/07/10 20:53:29: EVT#09532-08/07/10 20:53:29: 52=Background Initialization progress on VD 01/1 is 52.48%(48597s) 08/07/10 21:04:28: EVT#09533-08/07/10 21:04:28: 52=Background Initialization progress on VD 01/1 is 52.72%(49256s) 08/07/10 21:15:28: EVT#09534-08/07/10 21:15:28: 52=Background Initialization progress on VD 01/1 is 52.97%(49916s) 08/07/10 21:26:23: EVT#09535-08/07/10 21:26:23: 52=Background Initialization progress on VD 01/1 is 53.22%(50571s) 08/07/10 21:37:15: EVT#09536-08/07/10 21:37:15: 52=Background Initialization progress on VD 01/1 is 53.47%(51223s) 08/07/10 21:48:10: EVT#09537-08/07/10 21:48:10: 52=Background Initialization progress on VD 01/1 is 53.72%(51878s) 08/07/10 21:59:03: EVT#09538-08/07/10 21:59:03: 52=Background Initialization progress on VD 01/1 is 53.97%(52531s) 08/07/10 22:10:13: EVT#09539-08/07/10 22:10:13: 52=Background Initialization progress on VD 01/1 is 54.22%(53201s) 08/07/10 22:21:14: EVT#09540-08/07/10 22:21:14: 52=Background Initialization progress on VD 01/1 is 54.47%(53862s) 08/07/10 22:32:15: EVT#09541-08/07/10 22:32:15: 52=Background Initialization progress on VD 01/1 is 54.71%(54523s) 08/07/10 22:43:12: EVT#09542-08/07/10 22:43:12: 52=Background Initialization progress on VD 01/1 is 54.96%(55180s) 08/07/10 22:54:08: EVT#09543-08/07/10 22:54:08: 52=Background Initialization progress on VD 01/1 is 55.21%(55836s) 08/07/10 23:04:59: EVT#09544-08/07/10 23:04:59: 52=Background Initialization progress on VD 01/1 is 55.46%(56487s) 08/07/10 23:15:51: EVT#09545-08/07/10 23:15:51: 52=Background Initialization progress on VD 01/1 is 55.71%(57139s) 08/07/10 23:26:45: EVT#09546-08/07/10 23:26:45: 52=Background Initialization progress on VD 01/1 is 55.96%(57793s) 08/07/10 23:37:35: EVT#09547-08/07/10 23:37:35: 52=Background Initialization progress on VD 01/1 is 56.21%(58443s) 08/07/10 23:48:31: EVT#09548-08/07/10 23:48:31: 52=Background Initialization progress on VD 01/1 is 56.45%(59099s) 08/07/10 23:59:26: EVT#09549-08/07/10 23:59:26: 52=Background Initialization progress on VD 01/1 is 56.70%(59754s) 08/08/10 0:10:22: EVT#09550-08/08/10 0:10:22: 52=Background Initialization progress on VD 01/1 is 56.95%(60410s) 08/08/10 0:21:18: EVT#09551-08/08/10 0:21:18: 52=Background Initialization progress on VD 01/1 is 57.20%(61066s) 08/08/10 0:32:06: EVT#09552-08/08/10 0:32:06: 52=Background Initialization progress on VD 01/1 is 57.45%(61714s) 08/08/10 0:42:56: EVT#09553-08/08/10 0:42:56: 52=Background Initialization progress on VD 01/1 is 57.70%(62364s) 08/08/10 0:53:45: EVT#09554-08/08/10 0:53:45: 52=Background Initialization progress on VD 01/1 is 57.95%(63013s) 08/08/10 1:04:35: EVT#09555-08/08/10 1:04:35: 52=Background Initialization progress on VD 01/1 is 58.20%(63663s) 08/08/10 1:15:12: EVT#09556-08/08/10 1:15:12: 52=Background Initialization progress on VD 01/1 is 58.44%(64300s) 08/08/10 1:25:54: EVT#09557-08/08/10 1:25:54: 52=Background Initialization progress on VD 01/1 is 58.69%(64942s) 08/08/10 1:36:39: EVT#09558-08/08/10 1:36:39: 52=Background Initialization progress on VD 01/1 is 58.94%(51s) 08/08/10 1:47:18: EVT#09559-08/08/10 1:47:18: 52=Background Initialization progress on VD 01/1 is 59.19%(690s) 08/08/10 1:57:55: EVT#09560-08/08/10 1:57:55: 52=Background Initialization progress on VD 01/1 is 59.44%(1327s) 08/08/10 2:08:38: EVT#09561-08/08/10 2:08:38: 52=Background Initialization progress on VD 01/1 is 59.69%(1970s) 08/08/10 2:19:26: EVT#09562-08/08/10 2:19:26: 52=Background Initialization progress on VD 01/1 is 59.94%(2618s) 08/08/10 2:30:12: EVT#09563-08/08/10 2:30:12: 52=Background Initialization progress on VD 01/1 is 60.19%(3264s) 08/08/10 2:40:54: EVT#09564-08/08/10 2:40:54: 52=Background Initialization progress on VD 01/1 is 60.43%(3906s) 08/08/10 2:51:46: EVT#09565-08/08/10 2:51:46: 52=Background Initialization progress on VD 01/1 is 60.68%(4558s) 08/08/10 3:02:40: EVT#09566-08/08/10 3:02:40: 52=Background Initialization progress on VD 01/1 is 60.93%(5212s) 08/08/10 3:13:34: EVT#09567-08/08/10 3:13:34: 52=Background Initialization progress on VD 01/1 is 61.18%(5866s) 08/08/10 3:24:28: EVT#09568-08/08/10 3:24:28: 52=Background Initialization progress on VD 01/1 is 61.43%(6520s) 08/08/10 3:35:16: EVT#09569-08/08/10 3:35:16: 52=Background Initialization progress on VD 01/1 is 61.68%(7168s) 08/08/10 3:45:59: EVT#09570-08/08/10 3:45:59: 52=Background Initialization progress on VD 01/1 is 61.93%(7811s) 08/08/10 3:56:40: EVT#09571-08/08/10 3:56:40: 52=Background Initialization progress on VD 01/1 is 62.18%(8452s) 08/08/10 4:07:21: EVT#09572-08/08/10 4:07:21: 52=Background Initialization progress on VD 01/1 is 62.42%(9093s) 08/08/10 4:17:53: EVT#09573-08/08/10 4:17:53: 52=Background Initialization progress on VD 01/1 is 62.67%(9725s) 08/08/10 4:28:23: EVT#09574-08/08/10 4:28:23: 52=Background Initialization progress on VD 01/1 is 62.92%(10355s) 08/08/10 4:38:50: EVT#09575-08/08/10 4:38:50: 52=Background Initialization progress on VD 01/1 is 63.17%(10982s) 08/08/10 4:49:09: EVT#09576-08/08/10 4:49:09: 52=Background Initialization progress on VD 01/1 is 63.42%(11601s) 08/08/10 4:59:37: EVT#09577-08/08/10 4:59:37: 52=Background Initialization progress on VD 01/1 is 63.67%(12229s) 08/08/10 5:10:02: EVT#09578-08/08/10 5:10:02: 52=Background Initialization progress on VD 01/1 is 63.92%(12854s) 08/08/10 5:20:27: EVT#09579-08/08/10 5:20:27: 52=Background Initialization progress on VD 01/1 is 64.17%(13479s) 08/08/10 5:30:48: EVT#09580-08/08/10 5:30:48: 52=Background Initialization progress on VD 01/1 is 64.41%(14100s) 08/08/10 5:40:57: EVT#09581-08/08/10 5:40:57: 52=Background Initialization progress on VD 01/1 is 64.66%(14709s) 08/08/10 5:51:11: EVT#09582-08/08/10 5:51:10: 52=Background Initialization progress on VD 01/1 is 64.91%(15322s) 08/08/10 6:01:28: EVT#09583-08/08/10 6:01:28: 52=Background Initialization progress on VD 01/1 is 65.16%(15940s) 08/08/10 6:11:52: EVT#09584-08/08/10 6:11:52: 52=Background Initialization progress on VD 01/1 is 65.41%(16564s) 08/08/10 6:22:06: EVT#09585-08/08/10 6:22:06: 52=Background Initialization progress on VD 01/1 is 65.66%(17178s) 08/08/10 6:32:17: EVT#09586-08/08/10 6:32:17: 52=Background Initialization progress on VD 01/1 is 65.91%(17789s) 08/08/10 6:42:36: EVT#09587-08/08/10 6:42:36: 52=Background Initialization progress on VD 01/1 is 66.16%(18408s) 08/08/10 6:52:42: EVT#09588-08/08/10 6:52:42: 52=Background Initialization progress on VD 01/1 is 66.40%(19014s) 08/08/10 7:02:48: EVT#09589-08/08/10 7:02:48: 52=Background Initialization progress on VD 01/1 is 66.65%(19620s) 08/08/10 7:13:02: EVT#09590-08/08/10 7:13:02: 52=Background Initialization progress on VD 01/1 is 66.90%(20234s) 08/08/10 7:23:23: EVT#09591-08/08/10 7:23:23: 52=Background Initialization progress on VD 01/1 is 67.15%(20855s) 08/08/10 7:33:36: EVT#09592-08/08/10 7:33:36: 52=Background Initialization progress on VD 01/1 is 67.40%(21468s) 08/08/10 7:43:51: EVT#09593-08/08/10 7:43:51: 52=Background Initialization progress on VD 01/1 is 67.65%(22083s) 08/08/10 7:54:05: EVT#09594-08/08/10 7:54:05: 52=Background Initialization progress on VD 01/1 is 67.90%(22697s) 08/08/10 8:04:21: EVT#09595-08/08/10 8:04:21: 52=Background Initialization progress on VD 01/1 is 68.14%(23313s) 08/08/10 8:14:01: EVT#09596-08/08/10 8:14:01: 52=Background Initialization progress on VD 01/1 is 68.39%(23893s) 08/08/10 8:23:28: EVT#09597-08/08/10 8:23:28: 52=Background Initialization progress on VD 01/1 is 68.64%(24460s) 08/08/10 8:32:57: EVT#09598-08/08/10 8:32:57: 52=Background Initialization progress on VD 01/1 is 68.89%(25029s) 08/08/10 8:42:29: EVT#09599-08/08/10 8:42:29: 52=Background Initialization progress on VD 01/1 is 69.14%(25601s) 08/08/10 8:52:11: EVT#09600-08/08/10 8:52:11: 52=Background Initialization progress on VD 01/1 is 69.39%(26183s) 08/08/10 9:02:14: EVT#09601-08/08/10 9:02:14: 52=Background Initialization progress on VD 01/1 is 69.64%(26786s) 08/08/10 9:12:12: EVT#09602-08/08/10 9:12:12: 52=Background Initialization progress on VD 01/1 is 69.89%(27384s) 08/08/10 9:22:18: EVT#09603-08/08/10 9:22:18: 52=Background Initialization progress on VD 01/1 is 70.13%(27990s) 08/08/10 9:32:12: EVT#09604-08/08/10 9:32:12: 52=Background Initialization progress on VD 01/1 is 70.38%(28584s) 08/08/10 9:42:19: EVT#09605-08/08/10 9:42:19: 52=Background Initialization progress on VD 01/1 is 70.63%(29191s) 08/08/10 9:52:59: EVT#09606-08/08/10 9:52:59: 52=Background Initialization progress on VD 01/1 is 70.88%(29831s) 08/08/10 10:03:22: EVT#09607-08/08/10 10:03:22: 52=Background Initialization progress on VD 01/1 is 71.13%(30454s) 08/08/10 10:13:41: EVT#09608-08/08/10 10:13:41: 52=Background Initialization progress on VD 01/1 is 71.38%(31073s) 08/08/10 10:24:03: EVT#09609-08/08/10 10:24:03: 52=Background Initialization progress on VD 01/1 is 71.63%(31695s) 08/08/10 10:34:23: EVT#09610-08/08/10 10:34:23: 52=Background Initialization progress on VD 01/1 is 71.88%(32315s) 08/08/10 10:44:33: EVT#09611-08/08/10 10:44:33: 52=Background Initialization progress on VD 01/1 is 72.12%(32925s) 08/08/10 10:54:40: EVT#09612-08/08/10 10:54:40: 52=Background Initialization progress on VD 01/1 is 72.37%(33532s) 08/08/10 11:04:23: EVT#09613-08/08/10 11:04:23: 52=Background Initialization progress on VD 01/1 is 72.62%(34115s) 08/08/10 11:13:46: EVT#09614-08/08/10 11:13:46: 52=Background Initialization progress on VD 01/1 is 72.87%(34678s) 08/08/10 11:23:04: EVT#09615-08/08/10 11:23:04: 52=Background Initialization progress on VD 01/1 is 73.12%(35236s) 08/08/10 11:32:30: EVT#09616-08/08/10 11:32:30: 52=Background Initialization progress on VD 01/1 is 73.37%(35802s) 08/08/10 11:41:49: EVT#09617-08/08/10 11:41:49: 52=Background Initialization progress on VD 01/1 is 73.62%(36361s) 08/08/10 11:51:16: EVT#09618-08/08/10 11:51:16: 52=Background Initialization progress on VD 01/1 is 73.87%(36928s) 08/08/10 12:00:42: EVT#09619-08/08/10 12:00:42: 52=Background Initialization progress on VD 01/1 is 74.11%(37494s) 08/08/10 12:10:10: EVT#09620-08/08/10 12:10:10: 52=Background Initialization progress on VD 01/1 is 74.36%(38062s) 08/08/10 12:19:46: EVT#09621-08/08/10 12:19:46: 52=Background Initialization progress on VD 01/1 is 74.61%(38638s) 08/08/10 12:29:19: EVT#09622-08/08/10 12:29:19: 52=Background Initialization progress on VD 01/1 is 74.86%(39211s) 08/08/10 12:38:56: EVT#09623-08/08/10 12:38:56: 52=Background Initialization progress on VD 01/1 is 75.11%(39788s) 08/08/10 12:48:35: EVT#09624-08/08/10 12:48:35: 52=Background Initialization progress on VD 01/1 is 75.36%(40367s) 08/08/10 12:58:13: EVT#09625-08/08/10 12:58:13: 52=Background Initialization progress on VD 01/1 is 75.61%(40945s) 08/08/10 13:08:16: EVT#09626-08/08/10 13:08:16: 52=Background Initialization progress on VD 01/1 is 75.86%(41548s) 08/08/10 13:18:18: EVT#09627-08/08/10 13:18:18: 52=Background Initialization progress on VD 01/1 is 76.10%(42150s) 08/08/10 13:28:34: EVT#09628-08/08/10 13:28:34: 52=Background Initialization progress on VD 01/1 is 76.35%(42766s) 08/08/10 13:38:40: EVT#09629-08/08/10 13:38:40: 52=Background Initialization progress on VD 01/1 is 76.60%(43372s) 08/08/10 13:49:08: EVT#09630-08/08/10 13:49:08: 52=Background Initialization progress on VD 01/1 is 76.85%(44000s) 08/08/10 13:59:32: EVT#09631-08/08/10 13:59:32: 52=Background Initialization progress on VD 01/1 is 77.10%(44624s) 08/08/10 14:09:32: EVT#09632-08/08/10 14:09:32: 52=Background Initialization progress on VD 01/1 is 77.35%(45224s) 08/08/10 14:19:43: EVT#09633-08/08/10 14:19:43: 52=Background Initialization progress on VD 01/1 is 77.60%(45835s) 08/08/10 14:29:53: EVT#09634-08/08/10 14:29:53: 52=Background Initialization progress on VD 01/1 is 77.85%(46445s) 08/08/10 14:39:58: EVT#09635-08/08/10 14:39:58: 52=Background Initialization progress on VD 01/1 is 78.09%(47050s) 08/08/10 14:50:08: EVT#09636-08/08/10 14:50:08: 52=Background Initialization progress on VD 01/1 is 78.34%(47660s) 08/08/10 15:00:17: EVT#09637-08/08/10 15:00:17: 52=Background Initialization progress on VD 01/1 is 78.59%(48269s) 08/08/10 15:10:34: EVT#09638-08/08/10 15:10:34: 52=Background Initialization progress on VD 01/1 is 78.84%(48886s) 08/08/10 15:20:45: EVT#09639-08/08/10 15:20:45: 52=Background Initialization progress on VD 01/1 is 79.09%(49497s) 08/08/10 15:30:54: EVT#09640-08/08/10 15:30:54: 52=Background Initialization progress on VD 01/1 is 79.34%(50106s) 08/08/10 15:41:08: EVT#09641-08/08/10 15:41:08: 52=Background Initialization progress on VD 01/1 is 79.59%(50720s) 08/08/10 15:51:27: EVT#09642-08/08/10 15:51:27: 52=Background Initialization progress on VD 01/1 is 79.83%(51339s) 08/08/10 16:01:48: EVT#09643-08/08/10 16:01:48: 52=Background Initialization progress on VD 01/1 is 80.08%(51960s) 08/08/10 16:11:28: EVT#09644-08/08/10 16:11:28: 52=Background Initialization progress on VD 01/1 is 80.33%(52540s) 08/08/10 16:21:06: EVT#09645-08/08/10 16:21:06: 52=Background Initialization progress on VD 01/1 is 80.58%(53118s) 08/08/10 16:30:54: EVT#09646-08/08/10 16:30:54: 52=Background Initialization progress on VD 01/1 is 80.83%(53706s) 08/08/10 16:40:41: EVT#09647-08/08/10 16:40:41: 52=Background Initialization progress on VD 01/1 is 81.08%(54293s) 08/08/10 16:50:29: EVT#09648-08/08/10 16:50:29: 52=Background Initialization progress on VD 01/1 is 81.33%(54881s) 08/08/10 17:00:13: EVT#09649-08/08/10 17:00:13: 52=Background Initialization progress on VD 01/1 is 81.58%(55465s) 08/08/10 17:09:53: EVT#09650-08/08/10 17:09:53: 52=Background Initialization progress on VD 01/1 is 81.82%(56045s) 08/08/10 17:19:39: EVT#09651-08/08/10 17:19:39: 52=Background Initialization progress on VD 01/1 is 82.07%(56631s) 08/08/10 17:29:23: EVT#09652-08/08/10 17:29:23: 52=Background Initialization progress on VD 01/1 is 82.32%(57215s) 08/08/10 17:39:15: EVT#09653-08/08/10 17:39:15: 52=Background Initialization progress on VD 01/1 is 82.57%(57807s) 08/08/10 17:49:12: EVT#09654-08/08/10 17:49:12: 52=Background Initialization progress on VD 01/1 is 82.82%(58404s) 08/08/10 17:59:04: EVT#09655-08/08/10 17:59:04: 52=Background Initialization progress on VD 01/1 is 83.07%(58996s) 08/08/10 18:09:00: EVT#09656-08/08/10 18:09:00: 52=Background Initialization progress on VD 01/1 is 83.32%(59592s) 08/08/10 18:18:56: EVT#09657-08/08/10 18:18:56: 52=Background Initialization progress on VD 01/1 is 83.57%(60188s) 08/08/10 18:28:54: EVT#09658-08/08/10 18:28:54: 52=Background Initialization progress on VD 01/1 is 83.81%(60786s) 08/08/10 18:38:48: EVT#09659-08/08/10 18:38:48: 52=Background Initialization progress on VD 01/1 is 84.06%(61380s) 08/08/10 18:48:45: EVT#09660-08/08/10 18:48:45: 52=Background Initialization progress on VD 01/1 is 84.31%(61977s) 08/08/10 18:58:46: EVT#09661-08/08/10 18:58:46: 52=Background Initialization progress on VD 01/1 is 84.56%(62578s) 08/08/10 19:08:53: EVT#09662-08/08/10 19:08:53: 52=Background Initialization progress on VD 01/1 is 84.81%(63185s) 08/08/10 19:18:55: EVT#09663-08/08/10 19:18:55: 52=Background Initialization progress on VD 01/1 is 85.06%(63787s) 08/08/10 19:29:19: EVT#09664-08/08/10 19:29:19: 52=Background Initialization progress on VD 01/1 is 85.31%(64411s) 08/08/10 19:39:41: EVT#09665-08/08/10 19:39:41: 52=Background Initialization progress on VD 01/1 is 85.56%(65033s) 08/08/10 19:50:15: EVT#09666-08/08/10 19:50:15: 52=Background Initialization progress on VD 01/1 is 85.80%(131s) 08/08/10 20:00:47: EVT#09667-08/08/10 20:00:47: 52=Background Initialization progress on VD 01/1 is 86.05%(763s) 08/08/10 20:11:20: EVT#09668-08/08/10 20:11:20: 52=Background Initialization progress on VD 01/1 is 86.30%(1396s) 08/08/10 20:21:50: EVT#09669-08/08/10 20:21:50: 52=Background Initialization progress on VD 01/1 is 86.55%(2026s) 08/08/10 20:32:24: EVT#09670-08/08/10 20:32:24: 52=Background Initialization progress on VD 01/1 is 86.80%(2660s) 08/08/10 20:43:00: EVT#09671-08/08/10 20:43:00: 52=Background Initialization progress on VD 01/1 is 87.05%(3296s) 08/08/10 20:53:49: EVT#09672-08/08/10 20:53:49: 52=Background Initialization progress on VD 01/1 is 87.30%(3945s) 08/08/10 21:04:42: EVT#09673-08/08/10 21:04:42: 52=Background Initialization progress on VD 01/1 is 87.55%(4598s) 08/08/10 21:15:24: EVT#09674-08/08/10 21:15:24: 52=Background Initialization progress on VD 01/1 is 87.79%(5240s) 08/08/10 21:26:05: EVT#09675-08/08/10 21:26:05: 52=Background Initialization progress on VD 01/1 is 88.04%(5881s) 08/08/10 21:36:51: EVT#09676-08/08/10 21:36:51: 52=Background Initialization progress on VD 01/1 is 88.29%(6527s) 08/08/10 21:47:40: EVT#09677-08/08/10 21:47:40: 52=Background Initialization progress on VD 01/1 is 88.54%(7176s) 08/08/10 21:58:19: EVT#09678-08/08/10 21:58:19: 52=Background Initialization progress on VD 01/1 is 88.79%(7815s) 08/08/10 22:08:58: EVT#09679-08/08/10 22:08:58: 52=Background Initialization progress on VD 01/1 is 89.04%(8454s) 08/08/10 22:19:40: EVT#09680-08/08/10 22:19:40: 52=Background Initialization progress on VD 01/1 is 89.29%(9096s) 08/08/10 22:30:33: EVT#09681-08/08/10 22:30:33: 52=Background Initialization progress on VD 01/1 is 89.53%(9749s) 08/08/10 22:41:12: EVT#09682-08/08/10 22:41:12: 52=Background Initialization progress on VD 01/1 is 89.78%(10388s) 08/08/10 22:51:52: EVT#09683-08/08/10 22:51:52: 52=Background Initialization progress on VD 01/1 is 90.03%(11028s) 08/08/10 23:02:39: EVT#09684-08/08/10 23:02:39: 52=Background Initialization progress on VD 01/1 is 90.28%(11675s) 08/08/10 23:13:19: EVT#09685-08/08/10 23:13:19: 52=Background Initialization progress on VD 01/1 is 90.53%(12315s) 08/08/10 23:24:06: EVT#09686-08/08/10 23:24:06: 52=Background Initialization progress on VD 01/1 is 90.78%(12962s) 08/08/10 23:34:49: EVT#09687-08/08/10 23:34:49: 52=Background Initialization progress on VD 01/1 is 91.03%(13605s) 08/08/10 23:45:36: EVT#09688-08/08/10 23:45:36: 52=Background Initialization progress on VD 01/1 is 91.28%(14252s) 08/08/10 23:56:12: EVT#09689-08/08/10 23:56:12: 52=Background Initialization progress on VD 01/1 is 91.52%(14888s) 08/09/10 0:07:00: EVT#09690-08/09/10 0:07:00: 52=Background Initialization progress on VD 01/1 is 91.77%(15536s) 08/09/10 0:17:34: EVT#09691-08/09/10 0:17:34: 52=Background Initialization progress on VD 01/1 is 92.02%(16170s) 08/09/10 0:28:21: EVT#09692-08/09/10 0:28:21: 52=Background Initialization progress on VD 01/1 is 92.27%(16817s) 08/09/10 0:38:56: EVT#09693-08/09/10 0:38:56: 52=Background Initialization progress on VD 01/1 is 92.52%(17452s) 08/09/10 0:49:48: EVT#09694-08/09/10 0:49:48: 52=Background Initialization progress on VD 01/1 is 92.77%(18104s) 08/09/10 1:00:29: EVT#09695-08/09/10 1:00:29: 52=Background Initialization progress on VD 01/1 is 93.02%(18745s) 08/09/10 1:11:16: EVT#09696-08/09/10 1:11:16: 52=Background Initialization progress on VD 01/1 is 93.27%(19392s) 08/09/10 1:22:06: EVT#09697-08/09/10 1:22:06: 52=Background Initialization progress on VD 01/1 is 93.51%(20042s) 08/09/10 1:32:48: EVT#09698-08/09/10 1:32:48: 52=Background Initialization progress on VD 01/1 is 93.76%(20684s) 08/09/10 1:43:36: EVT#09699-08/09/10 1:43:36: 52=Background Initialization progress on VD 01/1 is 94.01%(21332s) 08/09/10 1:54:21: EVT#09700-08/09/10 1:54:21: 52=Background Initialization progress on VD 01/1 is 94.26%(21977s) 08/09/10 2:05:05: EVT#09701-08/09/10 2:05:05: 52=Background Initialization progress on VD 01/1 is 94.51%(22621s) 08/09/10 2:15:45: EVT#09702-08/09/10 2:15:45: 52=Background Initialization progress on VD 01/1 is 94.76%(23261s) 08/09/10 2:26:33: EVT#09703-08/09/10 2:26:33: 52=Background Initialization progress on VD 01/1 is 95.01%(23909s) 08/09/10 2:37:20: EVT#09704-08/09/10 2:37:20: 52=Background Initialization progress on VD 01/1 is 95.26%(24556s) 08/09/10 2:48:05: EVT#09705-08/09/10 2:48:05: 52=Background Initialization progress on VD 01/1 is 95.50%(25201s) 08/09/10 2:58:48: EVT#09706-08/09/10 2:58:48: 52=Background Initialization progress on VD 01/1 is 95.75%(25844s) 08/09/10 3:09:28: EVT#09707-08/09/10 3:09:28: 52=Background Initialization progress on VD 01/1 is 96.00%(26484s) 08/09/10 3:20:08: EVT#09708-08/09/10 3:20:08: 52=Background Initialization progress on VD 01/1 is 96.25%(27124s) 08/09/10 3:30:44: EVT#09709-08/09/10 3:30:44: 52=Background Initialization progress on VD 01/1 is 96.50%(27760s) 08/09/10 3:41:18: EVT#09710-08/09/10 3:41:18: 52=Background Initialization progress on VD 01/1 is 96.75%(28394s) 08/09/10 3:51:54: EVT#09711-08/09/10 3:51:54: 52=Background Initialization progress on VD 01/1 is 97.00%(29030s) 08/09/10 4:02:29: EVT#09712-08/09/10 4:02:29: 52=Background Initialization progress on VD 01/1 is 97.25%(29665s) 08/09/10 4:13:11: EVT#09713-08/09/10 4:13:11: 52=Background Initialization progress on VD 01/1 is 97.49%(30307s) 08/09/10 4:23:42: EVT#09714-08/09/10 4:23:42: 52=Background Initialization progress on VD 01/1 is 97.74%(30938s) 08/09/10 4:34:26: EVT#09715-08/09/10 4:34:26: 52=Background Initialization progress on VD 01/1 is 97.99%(31582s) 08/09/10 4:44:56: EVT#09716-08/09/10 4:44:56: 52=Background Initialization progress on VD 01/1 is 98.24%(32212s) 08/09/10 4:55:34: EVT#09717-08/09/10 4:55:34: 52=Background Initialization progress on VD 01/1 is 98.49%(32850s) 08/09/10 5:06:10: EVT#09718-08/09/10 5:06:10: 52=Background Initialization progress on VD 01/1 is 98.74%(33486s) 08/09/10 5:16:37: EVT#09719-08/09/10 5:16:37: 52=Background Initialization progress on VD 01/1 is 98.99%(34113s) 08/09/10 5:27:05: EVT#09720-08/09/10 5:27:05: 52=Background Initialization progress on VD 01/1 is 99.24%(34741s) 08/09/10 5:37:51: EVT#09721-08/09/10 5:37:51: 52=Background Initialization progress on VD 01/1 is 99.48%(35387s) 08/09/10 5:48:47: EVT#09722-08/09/10 5:48:47: 52=Background Initialization progress on VD 01/1 is 99.73%(36043s) 08/09/10 5:59:34: EVT#09723-08/09/10 5:59:34: 52=Background Initialization progress on VD 01/1 is 99.98%(36690s) 08/09/10 6:00:07: EVT#09724-08/09/10 6:00:07: 48=Background Initialization completed on VD 01/1 08/10/10 13:27:07: shutdownBlockDone: wait for all IO to complete 08/10/10 13:27:07: shutdownBlockDone: IO complete; wait for host command 08/10/10 13:27:07: EVT#09725-08/10/10 13:27:07: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#09726-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#09727-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#09728-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 96 % T3: Absolute State of Charge : 50 % T3: Remaining Capacity : 943 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 23 C Voltage : 3988 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 943 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 96 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#09729-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#09730-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#09731-T21: 91=Inserted: Encl PD 20 T21: EVT#09732-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#09733-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#09734-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#09735-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#09736-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#09737-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#09738-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#09739-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#09740-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#09741-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#09742-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T33: EVT#09743-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#09744-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=08/10 13:27:07 + rtc=33 to set timestamp 08/10/10 13:27:50: EVT#09745-08/10/10 13:27:50: 44=Time established as 08/10/10 13:27:50; (34 seconds since power on) 08/10/10 13:28:24: EVT#09746-08/10/10 13:28:24: 149=Battery temperature is normal 08/10/10 13:28:24: EVT#09747-08/10/10 13:28:24: 163=Current capacity of the battery is above threshold 08/10/10 13:29:11: MfiCmdInitQueue: FW now OPERATIONAL 08/10/10 13:29:11: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 08/10/10 13:29:11: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 08/10/10 13:29:11: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 08/10/10 13:29:11: producerIndex=0 08/10/10 13:33:08: shutdownBlockDone: wait for all IO to complete 08/10/10 13:33:08: shutdownBlockDone: IO complete; wait for host command 08/10/10 13:33:08: EVT#09748-08/10/10 13:33:08: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#09749-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#09750-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#09751-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 96 % T3: Absolute State of Charge : 50 % T3: Remaining Capacity : 943 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 22 C Voltage : 3998 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 943 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 96 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#09752-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#09753-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#09754-T21: 91=Inserted: Encl PD 20 T21: EVT#09755-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#09756-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#09757-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#09758-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#09759-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#09760-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#09761-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#09762-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#09763-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#09764-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#09765-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T33: EVT#09766-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#09767-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T34: pdFailHistInit: count=0 T34: Initializing write journal entries T34: NOT Flushing Cache T34: RMW: NVRAM structure valid - checking for active RMWs T34: DDF_TimestampGet: using nvram time=08/10 13:33:08 + rtc=34 to set timestamp 08/10/10 13:33:47: EVT#09768-08/10/10 13:33:47: 44=Time established as 08/10/10 13:33:47; (35 seconds since power on) 08/10/10 13:34:20: EVT#09769-08/10/10 13:34:20: 149=Battery temperature is normal 08/10/10 13:34:20: EVT#09770-08/10/10 13:34:20: 163=Current capacity of the battery is above threshold T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#09771-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#09772-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#09773-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 96 % T3: Absolute State of Charge : 50 % T3: Remaining Capacity : 943 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 23 C Voltage : 3993 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 943 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 96 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#09774-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#09775-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#09776-T21: 91=Inserted: Encl PD 20 T21: EVT#09777-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#09778-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#09779-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#09780-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#09781-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#09782-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#09783-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#09784-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#09785-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#09786-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#09787-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T34: EVT#09788-T34: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T34: EVT#09789-T34: 249=VD 01/1 is now OPTIMAL T34: Memory End affffff0 T34: Total memory available for disk cache: e6efbf0 T34: Total Number of Cache Lines 3648 T34: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T34: Cache initialization complete...Config info T34: ARs configured: 2 T34: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T34: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T34: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T34: span 0: sBlk=00000000, nBlk=11040000, ar=0 T34: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T34: span 0: sBlk=00000000, nBlk=74600000, ar=1 T34: Contiguous Triplet Usage: SS[64K]=0 T34: pdFailHistInit: count=0 T34: pdFailHistInit: count=0 T34: Initializing write journal entries T34: NOT Flushing Cache T34: RMW: NVRAM structure valid - checking for active RMWs T34: DDF_TimestampGet: using nvram time=08/10 13:35:32 + rtc=34 to set timestamp 08/10/10 13:36:12: EVT#09790-08/10/10 13:36:12: 44=Time established as 08/10/10 13:36:12; (35 seconds since power on) 08/10/10 13:36:45: EVT#09791-08/10/10 13:36:45: 149=Battery temperature is normal 08/10/10 13:36:45: EVT#09792-08/10/10 13:36:45: 163=Current capacity of the battery is above threshold 08/10/10 13:36:47: MfiCmdInitQueue: FW now OPERATIONAL 08/10/10 13:36:47: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 08/10/10 13:36:47: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 08/10/10 13:36:47: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 08/10/10 13:36:47: producerIndex=0 08/10/10 13:41:02: shutdownBlockDone: wait for all IO to complete 08/10/10 13:41:02: shutdownBlockDone: IO complete; wait for host command 08/10/10 13:41:02: EVT#09793-08/10/10 13:41:02: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#09794-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#09795-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#09796-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 96 % T3: Absolute State of Charge : 50 % T3: Remaining Capacity : 943 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 23 C Voltage : 3993 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 943 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 96 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#09797-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#09798-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#09799-T21: 91=Inserted: Encl PD 20 T21: EVT#09800-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#09801-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#09802-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#09803-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#09804-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#09805-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#09806-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#09807-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#09808-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#09809-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#09810-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T32: EVT#09811-T32: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T32: EVT#09812-T32: 249=VD 01/1 is now OPTIMAL T32: Memory End affffff0 T32: Total memory available for disk cache: e6efbf0 T32: Total Number of Cache Lines 3648 T32: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=08/10 13:41:02 + rtc=33 to set timestamp 08/10/10 13:41:40: EVT#09813-08/10/10 13:41:40: 44=Time established as 08/10/10 13:41:40; (34 seconds since power on) 08/10/10 13:42:09: MfiCmdInitQueue: FW now OPERATIONAL 08/10/10 13:42:09: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 08/10/10 13:42:09: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 08/10/10 13:42:09: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 08/10/10 13:42:09: producerIndex=0 08/10/10 13:42:14: EVT#09814-08/10/10 13:42:14: 149=Battery temperature is normal 08/10/10 13:42:14: EVT#09815-08/10/10 13:42:14: 163=Current capacity of the battery is above threshold 08/10/10 13:49:30: shutdownBlockDone: wait for all IO to complete 08/10/10 13:49:30: shutdownBlockDone: IO complete; wait for host command 08/10/10 13:49:30: EVT#09816-08/10/10 13:49:30: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#09817-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#09818-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#09819-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 96 % T3: Absolute State of Charge : 50 % T3: Remaining Capacity : 943 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 22 C Voltage : 3993 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 943 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 96 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#09820-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#09821-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#09822-T21: 91=Inserted: Encl PD 20 T21: EVT#09823-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#09824-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#09825-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#09826-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#09827-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#09828-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#09829-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#09830-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#09831-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#09832-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#09833-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T32: EVT#09834-T32: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T32: EVT#09835-T32: 249=VD 01/1 is now OPTIMAL T32: Memory End affffff0 T32: Total memory available for disk cache: e6efbf0 T32: Total Number of Cache Lines 3648 T32: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T32: Cache initialization complete...Config info T32: ARs configured: 2 T32: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T32: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T32: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T32: span 0: sBlk=00000000, nBlk=11040000, ar=0 T32: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T32: span 0: sBlk=00000000, nBlk=74600000, ar=1 T32: Contiguous Triplet Usage: SS[64K]=0 T32: pdFailHistInit: count=0 T32: pdFailHistInit: count=0 T32: Initializing write journal entries T32: NOT Flushing Cache T32: RMW: NVRAM structure valid - checking for active RMWs T32: DDF_TimestampGet: using nvram time=08/10 13:49:30 + rtc=32 to set timestamp 08/10/10 13:50:08: EVT#09836-08/10/10 13:50:08: 44=Time established as 08/10/10 13:50:08; (33 seconds since power on) 08/10/10 13:50:42: MfiCmdInitQueue: FW now OPERATIONAL 08/10/10 13:50:42: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 08/10/10 13:50:42: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 08/10/10 13:50:42: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 08/10/10 13:50:42: producerIndex=0 08/10/10 13:50:43: EVT#09837-08/10/10 13:50:43: 149=Battery temperature is normal 08/10/10 13:50:43: EVT#09838-08/10/10 13:50:43: 163=Current capacity of the battery is above threshold 08/10/10 13:56:31: shutdownBlockDone: wait for all IO to complete 08/10/10 13:56:31: shutdownBlockDone: IO complete; wait for host command 08/10/10 13:56:31: EVT#09839-08/10/10 13:56:31: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#09840-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#09841-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#09842-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 96 % T3: Absolute State of Charge : 50 % T3: Remaining Capacity : 942 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 23 C Voltage : 4008 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 942 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 96 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#09843-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#09844-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#09845-T21: 91=Inserted: Encl PD 20 T21: EVT#09846-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#09847-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#09848-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#09849-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#09850-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#09851-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#09852-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#09853-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#09854-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#09855-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#09856-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T32: EVT#09857-T32: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T32: EVT#09858-T32: 249=VD 01/1 is now OPTIMAL T32: Memory End affffff0 T32: Total memory available for disk cache: e6efbf0 T32: Total Number of Cache Lines 3648 T32: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T32: Cache initialization complete...Config info T32: ARs configured: 2 T32: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T32: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T32: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T32: span 0: sBlk=00000000, nBlk=11040000, ar=0 T32: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T32: span 0: sBlk=00000000, nBlk=74600000, ar=1 T32: Contiguous Triplet Usage: SS[64K]=0 T32: pdFailHistInit: count=0 T32: pdFailHistInit: count=0 T32: Initializing write journal entries T32: NOT Flushing Cache T32: RMW: NVRAM structure valid - checking for active RMWs T32: DDF_TimestampGet: using nvram time=08/10 13:56:31 + rtc=32 to set timestamp 08/10/10 13:57:09: EVT#09859-08/10/10 13:57:09: 44=Time established as 08/10/10 13:57:09; (34 seconds since power on) 08/10/10 13:57:43: EVT#09860-08/10/10 13:57:43: 149=Battery temperature is normal 08/10/10 13:57:43: EVT#09861-08/10/10 13:57:43: 163=Current capacity of the battery is above threshold 08/10/10 13:57:43: MfiCmdInitQueue: FW now OPERATIONAL 08/10/10 13:57:43: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 08/10/10 13:57:43: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 08/10/10 13:57:43: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 08/10/10 13:57:43: producerIndex=0 08/10/10 14:03:27: shutdownBlockDone: wait for all IO to complete 08/10/10 14:03:27: shutdownBlockDone: IO complete; wait for host command 08/10/10 14:03:27: EVT#09862-08/10/10 14:03:27: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#09863-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#09864-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#09865-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 96 % T3: Absolute State of Charge : 50 % T3: Remaining Capacity : 942 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 22 C Voltage : 3988 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 942 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 96 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#09866-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#09867-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#09868-T21: 91=Inserted: Encl PD 20 T21: EVT#09869-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#09870-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#09871-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#09872-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#09873-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#09874-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#09875-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#09876-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#09877-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#09878-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#09879-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T32: EVT#09880-T32: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T32: EVT#09881-T32: 249=VD 01/1 is now OPTIMAL T32: Memory End affffff0 T32: Total memory available for disk cache: e6efbf0 T32: Total Number of Cache Lines 3648 T32: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T32: Cache initialization complete...Config info T32: ARs configured: 2 T32: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T32: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T32: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T32: span 0: sBlk=00000000, nBlk=11040000, ar=0 T32: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T32: span 0: sBlk=00000000, nBlk=74600000, ar=1 T32: Contiguous Triplet Usage: SS[64K]=0 T32: pdFailHistInit: count=0 T32: pdFailHistInit: count=0 T32: Initializing write journal entries T32: NOT Flushing Cache T32: RMW: NVRAM structure valid - checking for active RMWs T32: DDF_TimestampGet: using nvram time=08/10 14:03:27 + rtc=32 to set timestamp 08/10/10 14:04:05: EVT#09882-08/10/10 14:04:05: 44=Time established as 08/10/10 14:04:05; (33 seconds since power on) 08/10/10 14:04:05: LOAD section: src=fe19a357, size=1a69, dst=0, mode=1...done 08/10/10 14:04:05: LOAD section: src=fe160060, size=30fea, dst=a0200000, mode=1...done 08/10/10 14:04:05: LOAD section: src=fe191053, size=92fb, dst=a027bfc0, mode=1...done 08/10/10 14:04:05: CTLR version 1.11.52-0396 Date Feb 1 2008 Time 19:36:17 08/10/10 14:04:05: Vendor Id: 60 SubVId: 1f0c DevId: 1000 SubDevId: 1028 08/10/10 14:04:40: EVT#09883-08/10/10 14:04:40: 149=Battery temperature is normal 08/10/10 14:04:40: EVT#09884-08/10/10 14:04:40: 163=Current capacity of the battery is above threshold 08/10/10 14:17:13: In SASPreBT here the _exitingApp = true T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#09885-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#09886-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#09887-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 96 % T3: Absolute State of Charge : 50 % T3: Remaining Capacity : 942 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 22 C Voltage : 4008 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 942 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 96 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#09888-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#09889-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#09890-T21: 91=Inserted: Encl PD 20 T21: EVT#09891-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#09892-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#09893-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#09894-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#09895-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#09896-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#09897-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#09898-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#09899-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#09900-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#09901-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T29: EVT#09902-T29: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T29: EVT#09903-T29: 249=VD 01/1 is now OPTIMAL T29: Memory End affffff0 T29: Total memory available for disk cache: e6efbf0 T29: Total Number of Cache Lines 3648 T29: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T29: Cache initialization complete...Config info T29: ARs configured: 2 T29: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T29: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T29: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T29: span 0: sBlk=00000000, nBlk=11040000, ar=0 T29: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T29: span 0: sBlk=00000000, nBlk=74600000, ar=1 T29: Contiguous Triplet Usage: SS[64K]=0 T29: pdFailHistInit: count=0 T29: pdFailHistInit: count=0 T29: Initializing write journal entries T29: NOT Flushing Cache T29: RMW: NVRAM structure valid - checking for active RMWs T29: DDF_TimestampGet: using nvram time=08/10 14:21:38 + rtc=29 to set timestamp 08/10/10 14:22:12: EVT#09904-08/10/10 14:22:12: 44=Time established as 08/10/10 14:22:12; (30 seconds since power on) 08/10/10 14:22:50: EVT#09905-08/10/10 14:22:50: 149=Battery temperature is normal 08/10/10 14:22:50: EVT#09906-08/10/10 14:22:50: 163=Current capacity of the battery is above threshold 08/10/10 14:53:28: MfiCmdInitQueue: FW now OPERATIONAL 08/10/10 14:53:28: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 08/10/10 14:53:28: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 08/10/10 14:53:28: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 08/10/10 14:53:28: producerIndex=0 08/10/10 15:11:43: shutdownBlockDone: wait for all IO to complete 08/10/10 15:11:43: shutdownBlockDone: IO complete; wait for host command 08/10/10 15:11:43: EVT#09907-08/10/10 15:11:43: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#09908-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#09909-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#09910-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 96 % T3: Absolute State of Charge : 49 % T3: Remaining Capacity : 940 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 23 C Voltage : 3993 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 940 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 96 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#09911-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#09912-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#09913-T21: 91=Inserted: Encl PD 20 T21: EVT#09914-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#09915-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#09916-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#09917-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#09918-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#09919-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#09920-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#09921-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#09922-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#09923-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#09924-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T22: EVT#09925-T22: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T22: EVT#09926-T22: 249=VD 01/1 is now OPTIMAL T22: Memory End affffff0 T22: Total memory available for disk cache: e6efbf0 T22: Total Number of Cache Lines 3648 T22: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T22: Cache initialization complete...Config info T22: ARs configured: 2 T22: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T22: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T22: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T22: span 0: sBlk=00000000, nBlk=11040000, ar=0 T22: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T22: span 0: sBlk=00000000, nBlk=74600000, ar=1 T22: Contiguous Triplet Usage: SS[64K]=0 T22: pdFailHistInit: count=0 T22: pdFailHistInit: count=0 T22: Initializing write journal entries T22: NOT Flushing Cache T22: RMW: NVRAM structure valid - checking for active RMWs T22: DDF_TimestampGet: using nvram time=08/10 15:11:43 + rtc=22 to set timestamp 08/10/10 15:12:10: EVT#09927-08/10/10 15:12:10: 44=Time established as 08/10/10 15:12:10; (22 seconds since power on) 08/10/10 15:12:11: LOAD section: src=fe19a357, size=1a69, dst=0, mode=1...done 08/10/10 15:12:11: LOAD section: src=fe160060, size=30fea, dst=a0200000, mode=1...done 08/10/10 15:12:11: LOAD section: src=fe191053, size=92fb, dst=a027bfc0, mode=1...done 08/10/10 15:12:11: CTLR version 1.11.52-0396 Date Feb 1 2008 Time 19:36:17 08/10/10 15:12:11: Vendor Id: 60 SubVId: 1f0c DevId: 1000 SubDevId: 1028 08/10/10 15:12:21: In SASPreBT here the _exitingApp = trueEVT#09928-08/10/10 15:12:56: 149=Battery temperature is normal 08/10/10 15:12:56: EVT#09929-08/10/10 15:12:56: 163=Current capacity of the battery is above threshold T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#09930-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#09931-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#09932-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 96 % T3: Absolute State of Charge : 49 % T3: Remaining Capacity : 939 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 82 Min T3: Average Time to Empty : 776 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 23 C Voltage : 3877 V T3: Current : -687 mA GasGaugeStat : c0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 939 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 96 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#09933-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#09934-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#09935-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#09936-T22: 91=Inserted: Encl PD 20 T22: EVT#09937-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#09938-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#09939-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#09940-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#09941-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#09942-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#09943-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#09944-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#09945-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#09946-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#09947-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T33: EVT#09948-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#09949-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=08/10 15:13:52 + rtc=33 to set timestamp 08/10/10 15:14:43: EVT#09950-08/10/10 15:14:43: 44=Time established as 08/10/10 15:14:43; (34 seconds since power on) 08/10/10 15:15:17: EVT#09951-08/10/10 15:15:17: 149=Battery temperature is normal 08/10/10 15:15:17: EVT#09952-08/10/10 15:15:17: 147=Battery started charging 08/10/10 15:15:17: EVT#09953-08/10/10 15:15:17: 163=Current capacity of the battery is above threshold 08/10/10 15:15:17: MfiCmdInitQueue: FW now OPERATIONAL 08/10/10 15:15:17: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 08/10/10 15:15:17: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 08/10/10 15:15:17: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 08/10/10 15:15:17: producerIndex=0 08/10/10 15:24:22: shutdownBlockDone: wait for all IO to complete 08/10/10 15:24:22: shutdownBlockDone: IO complete; wait for host command 08/10/10 15:24:22: EVT#09954-08/10/10 15:24:22: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#09955-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#09956-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#09957-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 98 % T3: Absolute State of Charge : 51 % T3: Remaining Capacity : 963 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 6 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 23 C Voltage : 4046 V T3: Current : 99 mA GasGaugeStat : 80 T3: GPID : 68ffb899 ChargerStatus : 2 T3: Remaining Capacity : 963 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 98 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#09958-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#09959-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#09960-T21: 91=Inserted: Encl PD 20 T21: EVT#09961-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#09962-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#09963-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#09964-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#09965-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#09966-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#09967-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#09968-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#09969-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#09970-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#09971-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T33: EVT#09972-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#09973-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=08/10 15:24:22 + rtc=33 to set timestamp 08/10/10 15:25:00: EVT#09974-08/10/10 15:25:00: 44=Time established as 08/10/10 15:25:00; (34 seconds since power on) 08/10/10 15:25:34: EVT#09975-08/10/10 15:25:34: 149=Battery temperature is normal 08/10/10 15:25:34: EVT#09976-08/10/10 15:25:34: 147=Battery started charging 08/10/10 15:25:34: EVT#09977-08/10/10 15:25:34: 163=Current capacity of the battery is above threshold 08/10/10 15:25:35: MfiCmdInitQueue: FW now OPERATIONAL 08/10/10 15:25:35: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 08/10/10 15:25:35: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 08/10/10 15:25:35: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 08/10/10 15:25:35: producerIndex=0 08/10/10 15:42:54: EVT#09978-08/10/10 15:42:54: 242=Battery charge complete 08/12/10 14:29:11: shutdownBlockDone: wait for all IO to complete 08/12/10 14:29:11: shutdownBlockDone: IO complete; wait for host command 08/12/10 14:29:11: EVT#09979-08/12/10 14:29:11: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#09980-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#09981-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#09982-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 97 % T3: Absolute State of Charge : 50 % T3: Remaining Capacity : 951 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 23 C Voltage : 4008 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 951 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 97 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#09983-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#09984-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#09985-T21: 91=Inserted: Encl PD 20 T21: EVT#09986-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#09987-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#09988-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#09989-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#09990-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#09991-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#09992-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#09993-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#09994-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#09995-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#09996-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T31: EVT#09997-T31: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T31: EVT#09998-T31: 249=VD 01/1 is now OPTIMAL T31: Memory End affffff0 T31: Total memory available for disk cache: e6efbf0 T31: Total Number of Cache Lines 3648 T31: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T31: Cache initialization complete...Config info T31: ARs configured: 2 T31: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T31: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T31: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T31: span 0: sBlk=00000000, nBlk=11040000, ar=0 T31: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0] T31: span 0: sBlk=00000000, nBlk=74600000, ar=1 T31: Contiguous Triplet Usage: SS[64K]=0 T31: pdFailHistInit: count=0 T31: pdFailHistInit: count=0 T31: Initializing write journal entries T31: NOT Flushing Cache T31: RMW: NVRAM structure valid - checking for active RMWs T31: DDF_TimestampGet: using nvram time=08/12 14:29:11 + rtc=31 to set timestamp 08/12/10 14:29:48: EVT#09999-08/12/10 14:29:48: 44=Time established as 08/12/10 14:29:48; (32 seconds since power on) 08/12/10 14:29:48: LOAD section: src=fe19a357, size=1a69, dst=0, mode=1...done 08/12/10 14:29:48: LOAD section: src=fe160060, size=30fea, dst=a0200000, mode=1...done 08/12/10 14:29:48: LOAD section: src=fe191053, size=92fb, dst=a027bfc0, mode=1...done 08/12/10 14:29:48: CTLR version 1.11.52-0396 Date Feb 1 2008 Time 19:36:17 08/12/10 14:29:48: Vendor Id: 60 SubVId: 1f0c DevId: 1000 SubDevId: 1028 08/12/10 14:30:21: EVT#10000-08/12/10 14:30:21: 73=VD 00/0 Properties updated to [ID=00,dcp=0c,ccp=0d,ap=0,dc=0,dbgi=0] (from [ID=00,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0]) 08/12/10 14:30:24: EVT#10001-08/12/10 14:30:24: 149=Battery temperature is normal 08/12/10 14:30:24: EVT#10002-08/12/10 14:30:24: 163=Current capacity of the battery is above threshold 08/12/10 14:31:23: EVT#10003-08/12/10 14:31:23: 73=VD 01/1 Properties updated to [ID=01,dcp=0c,ccp=0d,ap=0,dc=0,dbgi=0] (from [ID=01,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0]) 08/12/10 14:32:37: In SASPreBT here the _exitingApp = true T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#10004-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#10005-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#10006-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 97 % T3: Absolute State of Charge : 50 % T3: Remaining Capacity : 949 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 82 Min T3: Average Time to Empty : 721 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 23 C Voltage : 3883 V T3: Current : -689 mA GasGaugeStat : c0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 949 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 97 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#10007-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#10008-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#10009-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#10010-T22: 91=Inserted: Encl PD 20 T22: EVT#10011-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#10012-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#10013-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#10014-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#10015-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#10016-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#10017-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#10018-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#10019-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#10020-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#10021-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T29: EVT#10022-T29: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T29: EVT#10023-T29: 249=VD 01/1 is now OPTIMAL T29: Memory End affffff0 T29: Total memory available for disk cache: e6efbf0 T29: Total Number of Cache Lines 3648 T29: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T29: Cache initialization complete...Config info T29: ARs configured: 2 T29: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T29: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T29: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0c,ccp=0c,ap=0,dc=0,dbgi=0] T29: span 0: sBlk=00000000, nBlk=11040000, ar=0 T29: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0c,ccp=0c,ap=0,dc=0,dbgi=0] T29: span 0: sBlk=00000000, nBlk=74600000, ar=1 T29: Contiguous Triplet Usage: SS[64K]=0 T29: pdFailHistInit: count=0 T29: pdFailHistInit: count=0 T29: Initializing write journal entries T29: NOT Flushing Cache T29: RMW: NVRAM structure valid - checking for active RMWs T29: DDF_TimestampGet: using nvram time=08/12 14:34:46 + rtc=29 to set timestamp 08/12/10 14:35:32: EVT#10024-08/12/10 14:35:32: 44=Time established as 08/12/10 14:35:32; (30 seconds since power on) 08/12/10 14:35:32: LOAD section: src=fe19a357, size=1a69, dst=0, mode=1...done 08/12/10 14:35:32: LOAD section: src=fe160060, size=30fea, dst=a0200000, mode=1...done 08/12/10 14:35:32: LOAD section: src=fe191053, size=92fb, dst=a027bfc0, mode=1...done 08/12/10 14:35:32: CTLR version 1.11.52-0396 Date Feb 1 2008 Time 19:36:17 08/12/10 14:35:32: Vendor Id: 60 SubVId: 1f0c DevId: 1000 SubDevId: 1028 08/12/10 14:35:59: In SASPreBT here the _exitingApp = true T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#10025-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#10026-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#10027-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 97 % T3: Absolute State of Charge : 50 % T3: Remaining Capacity : 951 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 82 Min T3: Average Time to Empty : 905 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 23 C Voltage : 3889 V T3: Current : -689 mA GasGaugeStat : c0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 951 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 97 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#10028-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#10029-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#10030-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#10031-T22: 91=Inserted: Encl PD 20 T22: EVT#10032-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#10033-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#10034-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#10035-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#10036-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#10037-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#10038-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#10039-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#10040-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#10041-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#10042-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T33: EVT#10043-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#10044-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0c,ccp=0c,ap=0,dc=0,dbgi=0] T34: span 0: sBlk=00000000, nBlk=11040000, ar=0 T34: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0c,ccp=0c,ap=0,dc=0,dbgi=0] T34: span 0: sBlk=00000000, nBlk=74600000, ar=1 T34: Contiguous Triplet Usage: SS[64K]=0 T34: pdFailHistInit: count=0 T34: pdFailHistInit: count=0 T34: Initializing write journal entries T34: NOT Flushing Cache T34: RMW: NVRAM structure valid - checking for active RMWs T34: DDF_TimestampGet: using nvram time=08/12 14:36:03 + rtc=34 to set timestamp 08/12/10 14:36:54: EVT#10045-08/12/10 14:36:54: 44=Time established as 08/12/10 14:36:54; (35 seconds since power on) 08/12/10 14:37:27: EVT#10046-08/12/10 14:37:27: 149=Battery temperature is normal 08/12/10 14:37:27: EVT#10047-08/12/10 14:37:27: 147=Battery started charging 08/12/10 14:37:27: EVT#10048-08/12/10 14:37:27: 163=Current capacity of the battery is above threshold 08/12/10 14:37:28: MfiCmdInitQueue: FW now OPERATIONAL 08/12/10 14:37:28: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 08/12/10 14:37:28: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 08/12/10 14:37:29: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 08/12/10 14:37:29: producerIndex=0 08/12/10 14:40:59: shutdownBlockDone: wait for all IO to complete 08/12/10 14:40:59: shutdownBlockDone: IO complete; wait for host command 08/12/10 14:40:59: EVT#10049-08/12/10 14:40:59: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#10050-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#10051-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#10052-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 98 % T3: Absolute State of Charge : 51 % T3: Remaining Capacity : 961 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 6 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 23 C Voltage : 4041 V T3: Current : 116 mA GasGaugeStat : 80 T3: GPID : 68ffb899 ChargerStatus : 2 T3: Remaining Capacity : 961 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 98 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#10053-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#10054-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#10055-T21: 91=Inserted: Encl PD 20 T21: EVT#10056-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#10057-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#10058-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#10059-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#10060-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#10061-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#10062-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#10063-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#10064-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#10065-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#10066-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T30: EVT#10067-T30: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T30: EVT#10068-T30: 249=VD 01/1 is now OPTIMAL T30: Memory End affffff0 T30: Total memory available for disk cache: e6efbf0 T30: Total Number of Cache Lines 3648 T30: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T30: Cache initialization complete...Config info T30: ARs configured: 2 T30: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T30: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T30: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0c,ccp=0c,ap=0,dc=0,dbgi=0] T30: span 0: sBlk=00000000, nBlk=11040000, ar=0 T30: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0c,ccp=0c,ap=0,dc=0,dbgi=0] T30: span 0: sBlk=00000000, nBlk=74600000, ar=1 T30: Contiguous Triplet Usage: SS[64K]=0 T30: pdFailHistInit: count=0 T30: pdFailHistInit: count=0 T30: Initializing write journal entries T30: NOT Flushing Cache T30: RMW: NVRAM structure valid - checking for active RMWs T30: DDF_TimestampGet: using nvram time=08/12 14:40:59 + rtc=30 to set timestamp 08/12/10 14:41:34: EVT#10069-08/12/10 14:41:34: 44=Time established as 08/12/10 14:41:34; (30 seconds since power on) 08/12/10 14:41:35: LOAD section: src=fe19a357, size=1a69, dst=0, mode=1...done 08/12/10 14:41:35: LOAD section: src=fe160060, size=30fea, dst=a0200000, mode=1...done 08/12/10 14:41:35: LOAD section: src=fe191053, size=92fb, dst=a027bfc0, mode=1...done 08/12/10 14:41:35: CTLR version 1.11.52-0396 Date Feb 1 2008 Time 19:36:17 08/12/10 14:41:35: Vendor Id: 60 SubVId: 1f0c DevId: 1000 SubDevId: 1028 08/12/10 14:42:12: EVT#10070-08/12/10 14:42:12: 149=Battery temperature is normal 08/12/10 14:42:12: EVT#10071-08/12/10 14:42:12: 147=Battery started charging 08/12/10 14:42:12: EVT#10072-08/12/10 14:42:12: 163=Current capacity of the battery is above threshold 08/12/10 14:42:18: EVT#10073-08/12/10 14:42:18: 73=VD 00/0 Properties updated to [ID=00,dcp=01,ccp=0c,ap=0,dc=0,dbgi=0] (from [ID=00,dcp=0c,ccp=0c,ap=0,dc=0,dbgi=0]) 08/12/10 14:42:50: EVT#10074-08/12/10 14:42:50: 73=VD 01/1 Properties updated to [ID=01,dcp=01,ccp=0c,ap=0,dc=0,dbgi=0] (from [ID=01,dcp=0c,ccp=0c,ap=0,dc=0,dbgi=0]) 08/12/10 14:43:02: In SASPreBT here the _exitingApp = true T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#10075-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#10076-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#10077-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 98 % T3: Absolute State of Charge : 51 % T3: Remaining Capacity : 964 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 83 Min T3: Average Time to Empty : 932 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 23 C Voltage : 3910 V T3: Current : -693 mA GasGaugeStat : c0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 964 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 98 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#10078-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#10079-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#10080-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#10081-T22: 91=Inserted: Encl PD 20 T22: EVT#10082-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#10083-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#10084-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#10085-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#10086-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#10087-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#10088-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#10089-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#10090-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#10091-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#10092-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T31: EVT#10093-T31: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T31: EVT#10094-T31: 249=VD 01/1 is now OPTIMAL T31: Memory End affffff0 T31: Total memory available for disk cache: e6efbf0 T31: Total Number of Cache Lines 3648 T31: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T32: Cache initialization complete...Config info T32: ARs configured: 2 T32: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T32: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T32: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T32: span 0: sBlk=00000000, nBlk=11040000, ar=0 T32: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T32: span 0: sBlk=00000000, nBlk=74600000, ar=1 T32: Contiguous Triplet Usage: SS[64K]=0 T32: pdFailHistInit: count=0 T32: pdFailHistInit: count=0 T32: Initializing write journal entries T32: NOT Flushing Cache T32: RMW: NVRAM structure valid - checking for active RMWs T32: DDF_TimestampGet: using nvram time=08/12 14:43:15 + rtc=32 to set timestamp 08/12/10 14:44:02: EVT#10095-08/12/10 14:44:02: 44=Time established as 08/12/10 14:44:02; (32 seconds since power on) 08/12/10 14:44:02: LOAD section: src=fe19a357, size=1a69, dst=0, mode=1...done 08/12/10 14:44:02: LOAD section: src=fe160060, size=30fea, dst=a0200000, mode=1...done 08/12/10 14:44:03: LOAD section: src=fe191053, size=92fb, dst=a027bfc0, mode=1...done 08/12/10 14:44:03: CTLR version 1.11.52-0396 Date Feb 1 2008 Time 19:36:17 08/12/10 14:44:03: Vendor Id: 60 SubVId: 1f0c DevId: 1000 SubDevId: 1028 08/12/10 14:44:38: EVT#10096-08/12/10 14:44:38: 149=Battery temperature is normal 08/12/10 14:44:38: EVT#10097-08/12/10 14:44:38: 147=Battery started charging 08/12/10 14:44:38: EVT#10098-08/12/10 14:44:38: 163=Current capacity of the battery is above threshold 08/12/10 14:44:49: In SASPreBT here the _exitingApp = true T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#10099-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#10100-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#10101-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 98 % T3: Absolute State of Charge : 51 % T3: Remaining Capacity : 965 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 83 Min T3: Average Time to Empty : 904 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 23 C Voltage : 3907 V T3: Current : -692 mA GasGaugeStat : c0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 965 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 98 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#10102-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#10103-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#10104-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#10105-T22: 91=Inserted: Encl PD 20 T22: EVT#10106-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#10107-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#10108-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#10109-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#10110-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#10111-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#10112-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#10113-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#10114-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#10115-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#10116-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T33: EVT#10117-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#10118-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=08/12 14:44:53 + rtc=33 to set timestamp 08/12/10 14:45:43: EVT#10119-08/12/10 14:45:43: 44=Time established as 08/12/10 14:45:43; (34 seconds since power on) 08/12/10 14:46:17: EVT#10120-08/12/10 14:46:17: 149=Battery temperature is normal 08/12/10 14:46:17: EVT#10121-08/12/10 14:46:17: 147=Battery started charging 08/12/10 14:46:17: EVT#10122-08/12/10 14:46:17: 163=Current capacity of the battery is above threshold 08/12/10 14:46:18: MfiCmdInitQueue: FW now OPERATIONAL 08/12/10 14:46:18: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 08/12/10 14:46:18: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 08/12/10 14:46:18: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 08/12/10 14:46:18: producerIndex=0 08/12/10 15:03:37: EVT#10123-08/12/10 15:03:37: 242=Battery charge complete 08/14/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 08/14/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 08/14/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 08/14/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 08/14/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 08/14/10 3:00:00: EVT#10124-08/14/10 3:00:00: 39=Patrol Read started 08/14/10 3:06:23: EVT#10125-08/14/10 3:06:23: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(383s) 08/14/10 3:06:23: EVT#10126-08/14/10 3:06:23: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(383s) 08/14/10 3:13:56: EVT#10127-08/14/10 3:13:56: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(836s) 08/14/10 3:13:56: EVT#10128-08/14/10 3:13:56: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(836s) 08/14/10 3:18:31: EVT#10129-08/14/10 3:18:31: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1111s) 08/14/10 3:18:46: EVT#10130-08/14/10 3:18:46: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1126s) 08/14/10 3:20:59: EVT#10131-08/14/10 3:20:59: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(1259s) 08/14/10 3:21:00: EVT#10132-08/14/10 3:21:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(1260s) 08/14/10 3:24:16: EVT#10133-08/14/10 3:24:16: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(1456s) 08/14/10 3:24:17: EVT#10134-08/14/10 3:24:17: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(1457s) 08/14/10 3:26:19: EVT#10135-08/14/10 3:26:19: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(1579s) 08/14/10 3:26:20: EVT#10136-08/14/10 3:26:20: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(1580s) 08/14/10 3:28:34: EVT#10137-08/14/10 3:28:34: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(1714s) 08/14/10 3:28:35: EVT#10138-08/14/10 3:28:35: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(1715s) 08/14/10 3:30:51: EVT#10139-08/14/10 3:30:51: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1851s) 08/14/10 3:30:52: EVT#10140-08/14/10 3:30:52: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1852s) 08/14/10 3:33:22: EVT#10141-08/14/10 3:33:22: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(2002s) 08/14/10 3:33:23: EVT#10142-08/14/10 3:33:23: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(2003s) 08/14/10 3:37:22: EVT#10143-08/14/10 3:37:22: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2242s) 08/14/10 3:37:52: EVT#10144-08/14/10 3:37:52: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(2272s) 08/14/10 3:37:53: EVT#10145-08/14/10 3:37:53: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(2273s) 08/14/10 3:38:33: EVT#10146-08/14/10 3:38:33: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2313s) 08/14/10 3:43:27: EVT#10147-08/14/10 3:43:27: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(2607s) 08/14/10 3:43:28: prCallback: PR completed for pd=01 08/14/10 3:43:28: EVT#10148-08/14/10 3:43:28: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(2608s) 08/14/10 3:43:29: prCallback: PR completed for pd=00 08/14/10 3:56:46: EVT#10149-08/14/10 3:56:46: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3406s) 08/14/10 3:59:48: EVT#10150-08/14/10 3:59:48: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3588s) 08/14/10 4:17:04: EVT#10151-08/14/10 4:17:04: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4624s) 08/14/10 4:23:48: EVT#10152-08/14/10 4:23:48: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(5028s) 08/14/10 4:27:46: EVT#10153-08/14/10 4:27:46: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 30 5c 40 00 00 10 00 00, Sense: f0 00 03 30 5c 4c 93 0a 00 00 00 00 11 00 00 00 0 08/14/10 4:27:46: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/14/10 4:27:46: ErrLBAOffset (c93) LBA(305c4000) BadLba=305c4c93 08/14/10 4:27:46: prCallback: Medium Error on pd=03, StartLba=305c4000, ErrLba=305c4c93 08/14/10 4:27:46: prRecQueue: starting pd=03 recovery - blocking host commands 08/14/10 4:27:49: prRecGo: Ready to attempt recovery errLBA=305c4c93 on pd=03 08/14/10 4:27:49: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=60b899, strip=60b899, startRef=0,type=13 08/14/10 4:27:49: prRecGo: data NOT valid in cache 08/14/10 4:27:49: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/14/10 4:27:49: prRecCallback: WV has successfully completed on pd=03 08/14/10 4:27:49: EVT#10154-08/14/10 4:27:49: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 305c4c93 08/14/10 4:27:52: EVT#10155-08/14/10 4:27:52: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 30 5c 4c 94 00 10 00 00, Sense: f0 00 03 30 5c 4c 97 0a 00 00 00 00 11 00 00 00 0 08/14/10 4:27:52: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/14/10 4:27:52: ErrLBAOffset (3) LBA(305c4c94) BadLba=305c4c97 08/14/10 4:27:52: prCallback: Medium Error on pd=03, StartLba=305c4c94, ErrLba=305c4c97 08/14/10 4:27:52: prRecQueue: starting pd=03 recovery - blocking host commands 08/14/10 4:27:52: prRecGo: Ready to attempt recovery errLBA=305c4c97 on pd=03 08/14/10 4:27:52: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=60b899, strip=60b899, startRef=0,type=17 08/14/10 4:27:52: prRecGo: data NOT valid in cache 08/14/10 4:27:52: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/14/10 4:27:52: prRecCallback: WV has successfully completed on pd=03 08/14/10 4:27:52: EVT#10156-08/14/10 4:27:52: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 305c4c97 08/14/10 4:27:56: EVT#10157-08/14/10 4:27:56: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 30 5c 4c 98 00 10 00 00, Sense: f0 00 03 30 5c 4c 99 0a 00 00 00 00 11 00 00 00 0 08/14/10 4:27:56: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/14/10 4:27:56: ErrLBAOffset (1) LBA(305c4c98) BadLba=305c4c99 08/14/10 4:27:56: prCallback: Medium Error on pd=03, StartLba=305c4c98, ErrLba=305c4c99 08/14/10 4:27:56: prRecQueue: starting pd=03 recovery - blocking host commands 08/14/10 4:27:56: prRecGo: Ready to attempt recovery errLBA=305c4c99 on pd=03 08/14/10 4:27:56: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=60b899, strip=60b899, startRef=0,type=19 08/14/10 4:27:56: prRecGo: data NOT valid in cache 08/14/10 4:27:56: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/14/10 4:27:56: prRecCallback: WV has successfully completed on pd=03 08/14/10 4:27:56: EVT#10158-08/14/10 4:27:56: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 305c4c99 08/14/10 4:27:59: EVT#10159-08/14/10 4:27:59: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 30 5c 4c 9a 00 10 00 00, Sense: f0 00 03 30 5c 4c 9b 0a 00 00 00 00 11 00 00 00 0 08/14/10 4:27:59: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/14/10 4:27:59: ErrLBAOffset (1) LBA(305c4c9a) BadLba=305c4c9b 08/14/10 4:27:59: prCallback: Medium Error on pd=03, StartLba=305c4c9a, ErrLba=305c4c9b 08/14/10 4:27:59: prRecQueue: starting pd=03 recovery - blocking host commands 08/14/10 4:27:59: prRecGo: Ready to attempt recovery errLBA=305c4c9b on pd=03 08/14/10 4:27:59: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=60b899, strip=60b899, startRef=0,type=1b 08/14/10 4:27:59: prRecGo: data NOT valid in cache 08/14/10 4:27:59: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/14/10 4:27:59: prRecCallback: WV has successfully completed on pd=03 08/14/10 4:27:59: EVT#10160-08/14/10 4:27:59: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 305c4c9b 08/14/10 4:36:14: EVT#10161-08/14/10 4:36:14: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 33 fe ec 9c 00 10 00 00, Sense: f0 00 03 33 fe f4 1c 0a 00 00 00 00 11 00 00 00 0 08/14/10 4:36:14: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/14/10 4:36:14: ErrLBAOffset (780) LBA(33feec9c) BadLba=33fef41c 08/14/10 4:36:14: prCallback: Medium Error on pd=03, StartLba=33feec9c, ErrLba=33fef41c 08/14/10 4:36:14: prRecQueue: starting pd=03 recovery - blocking host commands 08/14/10 4:36:15: prRecGo: Ready to attempt recovery errLBA=33fef41c on pd=03 08/14/10 4:36:15: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=67fde8, strip=67fde8, startRef=0,type=1c 08/14/10 4:36:15: prRecGo: data NOT valid in cache 08/14/10 4:36:15: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/14/10 4:36:15: prRecCallback: WV has successfully completed on pd=03 08/14/10 4:36:15: EVT#10162-08/14/10 4:36:15: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 33fef41c 08/14/10 4:38:22: EVT#10163-08/14/10 4:38:22: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5902s) 08/14/10 4:41:38: EVT#10164-08/14/10 4:41:38: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 36 4b b4 1d 00 10 00 00, Sense: f0 00 03 36 4b ba b9 0a 00 00 00 00 11 00 00 00 0 08/14/10 4:41:38: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/14/10 4:41:38: ErrLBAOffset (69c) LBA(364bb41d) BadLba=364bbab9 08/14/10 4:41:38: prCallback: Medium Error on pd=03, StartLba=364bb41d, ErrLba=364bbab9 08/14/10 4:41:38: prRecQueue: starting pd=03 recovery - blocking host commands 08/14/10 4:41:40: prRecGo: Ready to attempt recovery errLBA=364bbab9 on pd=03 08/14/10 4:41:40: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=6c9775, strip=6c9775, startRef=0,type=39 08/14/10 4:41:40: prRecGo: data NOT valid in cache 08/14/10 4:41:40: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/14/10 4:41:40: prRecCallback: WV has successfully completed on pd=03 08/14/10 4:41:40: EVT#10165-08/14/10 4:41:40: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 364bbab9 08/14/10 4:51:23: EVT#10166-08/14/10 4:51:23: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6683s) 08/14/10 5:00:24: EVT#10167-08/14/10 5:00:24: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7224s) 08/14/10 5:21:28: EVT#10168-08/14/10 5:21:28: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 45 8f 3a ba 00 10 00 00, Sense: f0 00 03 45 8f 3e de 0a 00 00 00 00 11 00 00 00 0 08/14/10 5:21:28: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/14/10 5:21:28: ErrLBAOffset (424) LBA(458f3aba) BadLba=458f3ede 08/14/10 5:21:28: prCallback: Medium Error on pd=03, StartLba=458f3aba, ErrLba=458f3ede 08/14/10 5:21:28: prRecQueue: starting pd=03 recovery - blocking host commands 08/14/10 5:21:30: prRecGo: Ready to attempt recovery errLBA=458f3ede on pd=03 08/14/10 5:21:30: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=8b1e7d, strip=8b1e7d, startRef=0,type=5e 08/14/10 5:21:30: prRecGo: data NOT valid in cache 08/14/10 5:21:30: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/14/10 5:21:31: prRecCallback: WV has successfully completed on pd=03 08/14/10 5:21:31: EVT#10169-08/14/10 5:21:31: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 458f3ede 08/14/10 5:22:17: EVT#10170-08/14/10 5:22:17: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(8537s) 08/14/10 5:24:10: EVT#10171-08/14/10 5:24:10: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8650s) 08/14/10 5:45:59: EVT#10172-08/14/10 5:45:59: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 4e 48 ae df 00 10 00 00, Sense: f0 00 03 4e 48 b0 07 0a 00 00 00 00 11 00 00 00 0 08/14/10 5:45:59: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/14/10 5:45:59: ErrLBAOffset (128) LBA(4e48aedf) BadLba=4e48b007 08/14/10 5:45:59: prCallback: Medium Error on pd=03, StartLba=4e48aedf, ErrLba=4e48b007 08/14/10 5:45:59: prRecQueue: starting pd=03 recovery - blocking host commands 08/14/10 5:46:01: prRecGo: Ready to attempt recovery errLBA=4e48b007 on pd=03 08/14/10 5:46:01: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=9c9160, strip=9c9160, startRef=0,type=7 08/14/10 5:46:01: prRecGo: data NOT valid in cache 08/14/10 5:46:01: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/14/10 5:46:01: prRecCallback: WV has successfully completed on pd=03 08/14/10 5:46:01: EVT#10173-08/14/10 5:46:01: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 4e48b007 08/14/10 5:49:50: EVT#10174-08/14/10 5:49:50: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10190s) 08/14/10 5:54:59: EVT#10175-08/14/10 5:54:59: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(10499s) 08/14/10 5:58:56: EVT#10176-08/14/10 5:58:56: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 52 e1 d0 08 00 10 00 00, Sense: f0 00 03 52 e1 d1 81 0a 00 00 00 00 11 00 00 00 0 08/14/10 5:58:56: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/14/10 5:58:56: ErrLBAOffset (179) LBA(52e1d008) BadLba=52e1d181 08/14/10 5:58:56: prCallback: Medium Error on pd=03, StartLba=52e1d008, ErrLba=52e1d181 08/14/10 5:58:56: prRecQueue: starting pd=03 recovery - blocking host commands 08/14/10 5:58:58: prRecGo: Ready to attempt recovery errLBA=52e1d181 on pd=03 08/14/10 5:58:58: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=a5c3a3, strip=a5c3a3, startRef=0,type=1 08/14/10 5:58:58: prRecGo: data NOT valid in cache 08/14/10 5:58:58: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/14/10 5:58:58: prRecCallback: WV has successfully completed on pd=03 08/14/10 5:58:58: EVT#10177-08/14/10 5:58:58: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 52e1d181 08/14/10 6:01:50: EVT#10178-08/14/10 6:01:50: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 53 de 31 82 00 10 00 00, Sense: f0 00 03 53 de 3a 28 0a 00 00 00 00 11 00 00 00 0 08/14/10 6:01:50: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/14/10 6:01:50: ErrLBAOffset (8a6) LBA(53de3182) BadLba=53de3a28 08/14/10 6:01:50: prCallback: Medium Error on pd=03, StartLba=53de3182, ErrLba=53de3a28 08/14/10 6:01:50: prRecQueue: starting pd=03 recovery - blocking host commands 08/14/10 6:01:51: prRecGo: Ready to attempt recovery errLBA=53de3a28 on pd=03 08/14/10 6:01:51: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=a7bc74, strip=a7bc74, startRef=0,type=28 08/14/10 6:01:51: prRecGo: data NOT valid in cache 08/14/10 6:01:51: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/14/10 6:01:51: prRecCallback: WV has successfully completed on pd=03 08/14/10 6:01:51: EVT#10179-08/14/10 6:01:51: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 53de3a28 08/14/10 6:18:55: EVT#10180-08/14/10 6:18:55: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11935s) 08/14/10 6:29:19: EVT#10181-08/14/10 6:29:19: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(12559s) 08/14/10 6:53:36: EVT#10182-08/14/10 6:53:36: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14016s) 08/14/10 6:53:38: prCallback: PR completed for pd=02 08/14/10 6:59:56: EVT#10183-08/14/10 6:59:56: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 66 fa da 29 00 10 00 00, Sense: f0 00 03 66 fa dd 2b 0a 00 00 00 00 11 00 00 00 0 08/14/10 6:59:56: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/14/10 6:59:56: ErrLBAOffset (302) LBA(66fada29) BadLba=66fadd2b 08/14/10 6:59:56: prCallback: Medium Error on pd=03, StartLba=66fada29, ErrLba=66fadd2b 08/14/10 6:59:56: prRecQueue: starting pd=03 recovery - blocking host commands 08/14/10 6:59:58: prRecGo: Ready to attempt recovery errLBA=66fadd2b on pd=03 08/14/10 6:59:58: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=cdf5ba, strip=cdf5ba, startRef=0,type=2b 08/14/10 6:59:58: prRecGo: data NOT valid in cache 08/14/10 6:59:59: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/14/10 6:59:59: prRecCallback: WV has successfully completed on pd=03 08/14/10 6:59:59: EVT#10184-08/14/10 6:59:59: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 66fadd2b 08/14/10 7:02:26: EVT#10185-08/14/10 7:02:26: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 67 b2 6d 2c 00 10 00 00, Sense: f0 00 03 67 b2 71 1b 0a 00 00 00 00 11 00 00 00 0 08/14/10 7:02:26: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/14/10 7:02:26: ErrLBAOffset (3ef) LBA(67b26d2c) BadLba=67b2711b 08/14/10 7:02:26: prCallback: Medium Error on pd=03, StartLba=67b26d2c, ErrLba=67b2711b 08/14/10 7:02:26: prRecQueue: starting pd=03 recovery - blocking host commands 08/14/10 7:02:27: prRecGo: Ready to attempt recovery errLBA=67b2711b on pd=03 08/14/10 7:02:27: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=cf64e2, strip=cf64e2, startRef=0,type=1b 08/14/10 7:02:27: prRecGo: data NOT valid in cache 08/14/10 7:02:27: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/14/10 7:02:27: prRecCallback: WV has successfully completed on pd=03 08/14/10 7:02:27: EVT#10186-08/14/10 7:02:27: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 67b2711b 08/14/10 7:02:31: EVT#10187-08/14/10 7:02:31: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 67 b2 71 1c 00 10 00 00, Sense: f0 00 03 67 b2 71 1d 0a 00 00 00 00 11 00 00 00 0 08/14/10 7:02:31: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/14/10 7:02:31: ErrLBAOffset (1) LBA(67b2711c) BadLba=67b2711d 08/14/10 7:02:31: prCallback: Medium Error on pd=03, StartLba=67b2711c, ErrLba=67b2711d 08/14/10 7:02:31: prRecQueue: starting pd=03 recovery - blocking host commands 08/14/10 7:02:31: prRecGo: Ready to attempt recovery errLBA=67b2711d on pd=03 08/14/10 7:02:31: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=cf64e2, strip=cf64e2, startRef=0,type=1d 08/14/10 7:02:31: prRecGo: data NOT valid in cache 08/14/10 7:02:31: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/14/10 7:02:31: prRecCallback: WV has successfully completed on pd=03 08/14/10 7:02:31: EVT#10188-08/14/10 7:02:31: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 67b2711d 08/14/10 7:05:32: EVT#10189-08/14/10 7:05:32: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 68 83 c1 1e 00 10 00 00, Sense: f0 00 03 68 83 c7 fb 0a 00 00 00 00 11 00 00 00 0 08/14/10 7:05:32: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/14/10 7:05:32: ErrLBAOffset (6dd) LBA(6883c11e) BadLba=6883c7fb 08/14/10 7:05:32: prCallback: Medium Error on pd=03, StartLba=6883c11e, ErrLba=6883c7fb 08/14/10 7:05:32: prRecQueue: starting pd=03 recovery - blocking host commands 08/14/10 7:05:34: prRecGo: Ready to attempt recovery errLBA=6883c7fb on pd=03 08/14/10 7:05:34: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=d1078f, strip=d1078f, startRef=0,type=7b 08/14/10 7:05:34: prRecGo: data NOT valid in cache 08/14/10 7:05:34: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/14/10 7:05:34: prRecCallback: WV has successfully completed on pd=03 08/14/10 7:05:34: EVT#10190-08/14/10 7:05:34: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 6883c7fb 08/14/10 7:06:15: EVT#10191-08/14/10 7:06:15: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 68 ad 97 fc 00 10 00 00, Sense: f0 00 03 68 ad a5 f6 0a 00 00 00 00 11 00 00 00 0 08/14/10 7:06:15: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/14/10 7:06:15: ErrLBAOffset (dfa) LBA(68ad97fc) BadLba=68ada5f6 08/14/10 7:06:15: prCallback: Medium Error on pd=03, StartLba=68ad97fc, ErrLba=68ada5f6 08/14/10 7:06:15: prRecQueue: starting pd=03 recovery - blocking host commands 08/14/10 7:06:16: prRecGo: Ready to attempt recovery errLBA=68ada5f6 on pd=03 08/14/10 7:06:16: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=d15b4b, strip=d15b4b, startRef=0,type=76 08/14/10 7:06:16: prRecGo: data NOT valid in cache 08/14/10 7:06:16: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/14/10 7:06:16: prRecCallback: WV has successfully completed on pd=03 08/14/10 7:06:16: EVT#10192-08/14/10 7:06:16: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 68ada5f6 08/14/10 7:06:42: EVT#10193-08/14/10 7:06:42: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(14802s) 08/14/10 7:47:01: EVT#10194-08/14/10 7:47:01: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(17221s) 08/14/10 7:47:03: prCallback: PR completed for pd=03 08/14/10 7:47:03: PR cycle complete 08/14/10 7:47:03: EVT#10195-08/14/10 7:47:03: 35=Patrol Read complete 08/14/10 7:47:03: Next PR scheduled to start at 08/21/10 3:00:00 08/16/10 6:55:16: shutdownBlockDone: wait for all IO to complete 08/16/10 6:55:16: shutdownBlockDone: IO complete; wait for host command 08/16/10 6:55:16: EVT#10196-08/16/10 6:55:16: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#10197-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#10198-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#10199-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 51 % T3: Remaining Capacity : 974 mAh T3: Full Charge Capacity : 981 mAh T3: Time to Empty : 84 Min T3: Average Time to Empty : 83 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 23 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 26 C Voltage : 3933 V T3: Current : -698 mA GasGaugeStat : c0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 974 mAh Full Charge Capacity: 981 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#10200-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#10201-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#10202-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#10203-T22: 91=Inserted: Encl PD 20 T22: EVT#10204-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#10205-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#10206-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#10207-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#10208-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#10209-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#10210-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#10211-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#10212-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#10213-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#10214-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T36: EVT#10215-T36: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T36: EVT#10216-T36: 249=VD 01/1 is now OPTIMAL T36: Memory End affffff0 T36: Total memory available for disk cache: e6efbf0 T36: Total Number of Cache Lines 3648 T36: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T36: Cache initialization complete...Config info T36: ARs configured: 2 T36: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T36: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T36: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T36: span 0: sBlk=00000000, nBlk=11040000, ar=0 T36: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T36: span 0: sBlk=00000000, nBlk=74600000, ar=1 T36: Contiguous Triplet Usage: SS[64K]=0 T36: pdFailHistInit: count=0 T36: pdFailHistInit: count=0 T36: Initializing write journal entries T36: NOT Flushing Cache T36: RMW: NVRAM structure valid - checking for active RMWs T36: DDF_TimestampGet: using nvram time=08/16 6:55:16 + rtc=36 to set timestamp 08/16/10 7:46:17: EVT#10217-08/16/10 7:46:17: 44=Time established as 08/16/10 7:46:17; (37 seconds since power on) 08/16/10 7:46:48: EVT#10218-08/16/10 7:46:48: 149=Battery temperature is normal 08/16/10 7:46:48: EVT#10219-08/16/10 7:46:48: 147=Battery started charging 08/16/10 7:46:48: EVT#10220-08/16/10 7:46:48: 163=Current capacity of the battery is above threshold 08/16/10 7:46:48: MfiCmdInitQueue: FW now OPERATIONAL 08/16/10 7:46:48: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 08/16/10 7:46:48: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 08/16/10 7:46:48: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 08/16/10 7:46:48: producerIndex=0 08/16/10 7:52:13: EVT#10221-08/16/10 7:52:13: 242=Battery charge complete 08/21/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 08/21/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 08/21/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 08/21/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 08/21/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 08/21/10 3:00:00: EVT#10222-08/21/10 3:00:00: 39=Patrol Read started 08/21/10 3:02:31: EVT#10223-08/21/10 3:02:31: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(151s) 08/21/10 3:02:31: EVT#10224-08/21/10 3:02:31: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(151s) 08/21/10 3:04:32: EVT#10225-08/21/10 3:04:32: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(272s) 08/21/10 3:04:32: EVT#10226-08/21/10 3:04:32: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(272s) 08/21/10 3:07:22: EVT#10227-08/21/10 3:07:22: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(442s) 08/21/10 3:07:22: EVT#10228-08/21/10 3:07:22: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(442s) 08/21/10 3:09:35: EVT#10229-08/21/10 3:09:35: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(575s) 08/21/10 3:09:35: EVT#10230-08/21/10 3:09:35: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(575s) 08/21/10 3:12:17: EVT#10231-08/21/10 3:12:17: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(737s) 08/21/10 3:12:17: EVT#10232-08/21/10 3:12:17: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(737s) 08/21/10 3:14:33: EVT#10233-08/21/10 3:14:33: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(873s) 08/21/10 3:14:33: EVT#10234-08/21/10 3:14:33: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(873s) 08/21/10 3:17:45: EVT#10235-08/21/10 3:17:45: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1065s) 08/21/10 3:17:45: EVT#10236-08/21/10 3:17:45: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1065s) 08/21/10 3:18:23: EVT#10237-08/21/10 3:18:23: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1103s) 08/21/10 3:18:27: EVT#10238-08/21/10 3:18:27: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1107s) 08/21/10 3:20:49: EVT#10239-08/21/10 3:20:49: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1249s) 08/21/10 3:20:49: EVT#10240-08/21/10 3:20:49: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1249s) 08/21/10 3:23:40: EVT#10241-08/21/10 3:23:40: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1420s) 08/21/10 3:23:40: EVT#10242-08/21/10 3:23:40: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1420s) 08/21/10 3:27:41: EVT#10243-08/21/10 3:27:41: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1661s) 08/21/10 3:27:41: EVT#10244-08/21/10 3:27:41: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1661s) 08/21/10 3:27:41: prCallback: PR completed for pd=01 08/21/10 3:27:41: prCallback: PR completed for pd=00 08/21/10 3:37:14: EVT#10245-08/21/10 3:37:14: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2234s) 08/21/10 3:37:51: EVT#10246-08/21/10 3:37:51: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2271s) 08/21/10 3:56:39: EVT#10247-08/21/10 3:56:39: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3399s) 08/21/10 3:58:27: EVT#10248-08/21/10 3:58:27: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3507s) 08/21/10 4:16:56: EVT#10249-08/21/10 4:16:56: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4616s) 08/21/10 4:21:01: EVT#10250-08/21/10 4:21:01: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4861s) 08/21/10 4:36:08: EVT#10251-08/21/10 4:36:08: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 35 aa 30 00 00 10 00 00, Sense: f0 00 03 35 aa 3e 3e 0a 00 00 00 00 11 00 00 00 0 08/21/10 4:36:08: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/21/10 4:36:08: ErrLBAOffset (e3e) LBA(35aa3000) BadLba=35aa3e3e 08/21/10 4:36:08: prCallback: Medium Error on pd=03, StartLba=35aa3000, ErrLba=35aa3e3e 08/21/10 4:36:08: prRecQueue: starting pd=03 recovery - blocking host commands 08/21/10 4:36:08: prRecGo: Ready to attempt recovery errLBA=35aa3e3e on pd=03 08/21/10 4:36:08: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=6b547c, strip=6b547c, startRef=0,type=3e 08/21/10 4:36:08: prRecGo: data NOT valid in cache 08/21/10 4:36:08: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/21/10 4:36:08: prRecCallback: WV has successfully completed on pd=03 08/21/10 4:36:08: EVT#10252-08/21/10 4:36:08: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 35aa3e3e 08/21/10 4:38:09: EVT#10253-08/21/10 4:38:09: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5889s) 08/21/10 4:46:21: EVT#10254-08/21/10 4:46:21: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6381s) 08/21/10 4:53:41: EVT#10255-08/21/10 4:53:41: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 3d 67 be 3f 00 10 00 00, Sense: f0 00 03 3d 67 c2 73 0a 00 00 00 00 11 00 00 00 0 08/21/10 4:53:41: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 08/21/10 4:53:41: ErrLBAOffset (434) LBA(3d67be3f) BadLba=3d67c273 08/21/10 4:53:41: prCallback: Medium Error on pd=03, StartLba=3d67be3f, ErrLba=3d67c273 08/21/10 4:53:41: prRecQueue: starting pd=03 recovery - blocking host commands 08/21/10 4:53:41: prRecGo: Ready to attempt recovery errLBA=3d67c273 on pd=03 08/21/10 4:53:41: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=7acf84, strip=7acf84, startRef=0,type=73 08/21/10 4:53:41: prRecGo: data NOT valid in cache 08/21/10 4:53:41: prRecCallback: READ from mirror arm successful; send WV to pd=03 08/21/10 4:53:41: prRecCallback: WV has successfully completed on pd=03 08/21/10 4:53:41: EVT#10256-08/21/10 4:53:41: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 3d67c273 08/21/10 5:00:19: EVT#10257-08/21/10 5:00:19: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7219s) 08/21/10 5:13:40: EVT#10258-08/21/10 5:13:40: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(8020s) 08/21/10 5:23:46: EVT#10259-08/21/10 5:23:46: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8626s) 08/21/10 5:42:00: EVT#10260-08/21/10 5:42:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9720s) 08/21/10 5:49:33: EVT#10261-08/21/10 5:49:33: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10173s) 08/21/10 6:12:00: EVT#10262-08/21/10 6:12:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11520s) 08/21/10 6:18:26: EVT#10263-08/21/10 6:18:26: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11906s) 08/21/10 6:45:23: EVT#10264-08/21/10 6:45:23: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13523s) 08/21/10 6:52:57: EVT#10265-08/21/10 6:52:57: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(13977s) 08/21/10 6:52:59: prCallback: PR completed for pd=02 08/21/10 7:22:53: EVT#10266-08/21/10 7:22:53: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15773s) 08/21/10 7:22:55: prCallback: PR completed for pd=03 08/21/10 7:22:55: PR cycle complete 08/21/10 7:22:55: EVT#10267-08/21/10 7:22:55: 35=Patrol Read complete 08/21/10 7:22:55: Next PR scheduled to start at 08/28/10 3:00:00 08/28/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 08/28/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 08/28/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 08/28/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 08/28/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 08/28/10 3:00:00: EVT#10268-08/28/10 3:00:00: 39=Patrol Read started 08/28/10 3:00:00: EVT#10269-08/28/10 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 08/28/10 3:00:00: EVT#10270-08/28/10 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 08/28/10 3:00:00: EVT#10271-08/28/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 08/28/10 3:00:00: EVT#10272-08/28/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 08/28/10 3:02:39: EVT#10273-08/28/10 3:02:39: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(159s) 08/28/10 3:02:39: EVT#10274-08/28/10 3:02:39: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(159s) 08/28/10 3:04:32: EVT#10275-08/28/10 3:04:32: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(272s) 08/28/10 3:04:32: EVT#10276-08/28/10 3:04:32: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(272s) 08/28/10 3:07:22: EVT#10277-08/28/10 3:07:22: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(442s) 08/28/10 3:07:22: EVT#10278-08/28/10 3:07:22: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(442s) 08/28/10 3:09:35: EVT#10279-08/28/10 3:09:35: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(575s) 08/28/10 3:09:35: EVT#10280-08/28/10 3:09:35: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(575s) 08/28/10 3:12:25: EVT#10281-08/28/10 3:12:25: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(745s) 08/28/10 3:12:25: EVT#10282-08/28/10 3:12:25: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(745s) 08/28/10 3:14:33: EVT#10283-08/28/10 3:14:33: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(873s) 08/28/10 3:14:33: EVT#10284-08/28/10 3:14:33: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(873s) 08/28/10 3:17:45: EVT#10285-08/28/10 3:17:45: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1065s) 08/28/10 3:17:45: EVT#10286-08/28/10 3:17:45: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1065s) 08/28/10 3:18:30: EVT#10287-08/28/10 3:18:30: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1110s) 08/28/10 3:18:34: EVT#10288-08/28/10 3:18:34: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1114s) 08/28/10 3:20:57: EVT#10289-08/28/10 3:20:57: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1257s) 08/28/10 3:20:57: EVT#10290-08/28/10 3:20:57: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1257s) 08/28/10 3:23:48: EVT#10291-08/28/10 3:23:48: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1428s) 08/28/10 3:23:48: EVT#10292-08/28/10 3:23:48: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1428s) 08/28/10 3:27:41: EVT#10293-08/28/10 3:27:41: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1661s) 08/28/10 3:27:41: EVT#10294-08/28/10 3:27:41: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1661s) 08/28/10 3:27:41: prCallback: PR completed for pd=00 08/28/10 3:27:41: prCallback: PR completed for pd=01 08/28/10 3:37:22: EVT#10295-08/28/10 3:37:22: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2242s) 08/28/10 3:37:54: EVT#10296-08/28/10 3:37:54: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2274s) 08/28/10 3:56:45: EVT#10297-08/28/10 3:56:45: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3405s) 08/28/10 3:58:28: EVT#10298-08/28/10 3:58:28: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3508s) 08/28/10 4:17:04: EVT#10299-08/28/10 4:17:04: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4624s) 08/28/10 4:21:14: EVT#10300-08/28/10 4:21:14: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4874s) 08/28/10 4:38:17: EVT#10301-08/28/10 4:38:17: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5897s) 08/28/10 4:46:48: EVT#10302-08/28/10 4:46:48: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6408s) 08/28/10 5:00:19: EVT#10303-08/28/10 5:00:19: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7219s) 08/28/10 5:14:13: EVT#10304-08/28/10 5:14:13: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(8053s) 08/28/10 5:23:55: EVT#10305-08/28/10 5:23:55: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8635s) 08/28/10 5:42:37: EVT#10306-08/28/10 5:42:37: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9757s) 08/28/10 5:49:36: EVT#10307-08/28/10 5:49:36: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10176s) 08/28/10 6:12:47: EVT#10308-08/28/10 6:12:47: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11567s) 08/28/10 6:18:38: EVT#10309-08/28/10 6:18:38: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11918s) 08/28/10 6:45:52: EVT#10310-08/28/10 6:45:52: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13552s) 08/28/10 6:53:10: EVT#10311-08/28/10 6:53:10: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(13990s) 08/28/10 6:53:12: prCallback: PR completed for pd=02 08/28/10 7:23:12: EVT#10312-08/28/10 7:23:12: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15792s) 08/28/10 7:23:13: prCallback: PR completed for pd=03 08/28/10 7:23:13: PR cycle complete 08/28/10 7:23:13: EVT#10313-08/28/10 7:23:13: 35=Patrol Read complete 08/28/10 7:23:13: Next PR scheduled to start at 09/04/10 3:00:00 09/04/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 09/04/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 09/04/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 09/04/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 09/04/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 09/04/10 3:00:00: EVT#10314-09/04/10 3:00:00: 39=Patrol Read started 09/04/10 3:00:00: EVT#10315-09/04/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 09/04/10 3:00:00: EVT#10316-09/04/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 09/04/10 3:00:08: EVT#10317-09/04/10 3:00:08: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(8s) 09/04/10 3:00:08: EVT#10318-09/04/10 3:00:08: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(8s) 09/04/10 3:14:01: EVT#10319-09/04/10 3:14:01: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(841s) 09/04/10 3:14:01: EVT#10320-09/04/10 3:14:01: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(841s) 09/04/10 3:20:45: EVT#10321-09/04/10 3:20:45: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1245s) 09/04/10 3:20:46: EVT#10322-09/04/10 3:20:46: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(1246s) 09/04/10 3:20:47: EVT#10323-09/04/10 3:20:47: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(1247s) 09/04/10 3:20:49: EVT#10324-09/04/10 3:20:49: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1249s) 09/04/10 3:27:58: EVT#10325-09/04/10 3:27:58: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(1678s) 09/04/10 3:27:58: EVT#10326-09/04/10 3:27:58: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(1678s) 09/04/10 3:35:21: EVT#10327-09/04/10 3:35:21: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(2121s) 09/04/10 3:35:21: EVT#10328-09/04/10 3:35:21: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(2121s) 09/04/10 3:39:33: EVT#10329-09/04/10 3:39:33: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2373s) 09/04/10 3:40:23: EVT#10330-09/04/10 3:40:23: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2423s) 09/04/10 3:43:15: EVT#10331-09/04/10 3:43:15: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(2595s) 09/04/10 3:43:15: EVT#10332-09/04/10 3:43:15: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(2595s) 09/04/10 3:51:48: EVT#10333-09/04/10 3:51:48: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(3108s) 09/04/10 3:51:48: EVT#10334-09/04/10 3:51:48: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(3108s) 09/04/10 3:59:03: EVT#10335-09/04/10 3:59:03: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3543s) 09/04/10 4:00:32: EVT#10336-09/04/10 4:00:32: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(3632s) 09/04/10 4:00:32: EVT#10337-09/04/10 4:00:32: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(3632s) 09/04/10 4:01:16: EVT#10338-09/04/10 4:01:16: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3676s) 09/04/10 4:10:05: EVT#10339-09/04/10 4:10:05: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(4205s) 09/04/10 4:10:05: EVT#10340-09/04/10 4:10:05: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(4205s) 09/04/10 4:19:43: EVT#10341-09/04/10 4:19:43: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4783s) 09/04/10 4:19:49: EVT#10342-09/04/10 4:19:49: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(4789s) 09/04/10 4:19:50: EVT#10343-09/04/10 4:19:50: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(4790s) 09/04/10 4:24:56: EVT#10344-09/04/10 4:24:56: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(5096s) 09/04/10 4:26:05: EVT#10345-09/04/10 4:26:05: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 2f 0d f0 00 00 10 00 00, Sense: f0 00 03 2f 0d f2 1d 0a 00 00 00 00 11 00 00 00 0 09/04/10 4:26:05: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 09/04/10 4:26:05: ErrLBAOffset (21d) LBA(2f0df000) BadLba=2f0df21d 09/04/10 4:26:05: prCallback: Medium Error on pd=03, StartLba=2f0df000, ErrLba=2f0df21d 09/04/10 4:26:05: prRecQueue: starting pd=03 recovery - blocking host commands 09/04/10 4:34:46: mfiIsr: idr=00000020 09/04/10 4:34:46: Driver detected possible FW hang, halting FW. 09/04/10 4:34:46: Pending Command Details: 09/04/10 4:34:46: Total Pending Commands = 0 [0]: fp=a00bf5b8, lr=a0c2cb64 - _MonTask+190 [1]: fp=a00bf7e0, lr=a0c9e2a0 - mfiIdrIsr+124 [2]: fp=a00bf7f8, lr=e401e960 - dispatchIsrs+c4 [3]: fp=a00bf828, lr=e401e9f0 - external_IRQ+34 [4]: fp=a00bf840, lr=e401e074 - wrapper__External_IRQ+74 [5]: fp=a00bf890, lr=a0c4e020 - TaskStartNext+13c [6]: fp=a00bf8d0, lr=a0c3a23c - set_state+628 [7]: fp=a00bf9b8, lr=a0c3b5d8 - raid_task+5ec [8]: fp=a00bffa0, lr=a0c9a79c - _main+91c [9]: fp=a00bfff8, lr=fe001c70 - __start+bf8 MonTask: line 3566 in file ../../raid/1078dma.c UIC_ER=10000ec:5500063, UIC_MSR=0:40, MSR=21000, sp=a00bf5b8 MegaMon> T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: DRAM Sig from the Prev boot T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: LogInit: Flushing events from previous boot T3: EVT#10346-09/04/10 4:34:46: 15=Fatal firmware error: Driver detected possible FW hang, halting FW. T3: EVT#10347-09/04/10 4:34:46: 15=Fatal firmware error: Line 3566 in ../../raid/1078dma.c T3: EVT#10348-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#10349-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 1 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#10350-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 339524790 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 10 04 2010 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 96 % T3: Absolute State of Charge : 49 % T3: Remaining Capacity : 930 mAh T3: Full Charge Capacity : 971 mAh T3: Time to Empty : 81 Min T3: Average Time to Empty : 80 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 24 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 21 C Voltage : 3867 V T3: Current : -685 mA GasGaugeStat : c0 T3: GPID : efffb899 ChargerStatus : 3 T3: Remaining Capacity : 930 mAh Full Charge Capacity: 971 mAh T3: Relative Stat of Charge : 96 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#10351-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T5: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T5: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T5: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T5: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#10352-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#10353-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#10354-T22: 91=Inserted: Encl PD 20 T22: EVT#10355-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#10356-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#10357-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#10358-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#10359-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#10360-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#10361-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#10362-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#10363-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#10364-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#10365-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T33: EVT#10366-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#10367-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: EVT#10368-T33: 12=Cache data recovered successfully T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=09/04 4:34:46 + rtc=33 to set timestamp 09/04/10 5:52:26: EVT#10369-09/04/10 5:52:26: 44=Time established as 09/04/10 5:52:26; (34 seconds since power on) 09/04/10 5:53:00: EVT#10370-09/04/10 5:53:00: 149=Battery temperature is normal 09/04/10 5:53:00: EVT#10371-09/04/10 5:53:00: 147=Battery started charging 09/04/10 5:53:00: EVT#10372-09/04/10 5:53:00: 163=Current capacity of the battery is above threshold 09/04/10 5:53:01: MfiCmdInitQueue: FW now OPERATIONAL 09/04/10 5:53:01: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 09/04/10 5:53:01: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 09/04/10 5:53:01: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 09/04/10 5:53:01: producerIndex=0 09/04/10 5:53:25: prDiskStart: starting Patrol Read on PD=00 09/04/10 5:53:25: prDiskStart: starting Patrol Read on PD=01 09/04/10 5:53:25: prDiskStart: starting Patrol Read on PD=02 09/04/10 5:53:25: prDiskStart: starting Patrol Read on PD=03 09/04/10 5:53:25: EVT#10373-09/04/10 5:53:25: 38=Patrol Read resumed 09/04/10 5:53:41: EVT#10374-09/04/10 5:53:41: 94=Patrol Read progress on PD 03(e0x20/s3) is 40.49%(16s) 09/04/10 5:53:41: EVT#10375-09/04/10 5:53:41: 94=Patrol Read progress on PD 02(e0x20/s2) is 42.97%(16s) 09/04/10 5:53:41: EVT#10376-09/04/10 5:53:41: 94=Patrol Read progress on PD 01(e0x20/s1) is 96.09%(16s) 09/04/10 5:53:41: EVT#10377-09/04/10 5:53:41: 94=Patrol Read progress on PD 00(e0x20/s0) is 96.09%(16s) 09/04/10 5:56:45: EVT#10378-09/04/10 5:56:45: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(200s) 09/04/10 5:56:45: prCallback: PR completed for pd=00 09/04/10 5:56:45: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 09/04/10 5:56:53: EVT#10379-09/04/10 5:56:53: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(208s) 09/04/10 5:56:53: prCallback: PR completed for pd=01 09/04/10 6:10:34: EVT#10380-09/04/10 6:10:34: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(1029s) 09/04/10 6:19:40: EVT#10381-09/04/10 6:19:40: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(1575s) 09/04/10 6:22:15: EVT#10382-09/04/10 6:22:15: 242=Battery charge complete 09/04/10 6:32:50: EVT#10383-09/04/10 6:32:50: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(2365s) 09/04/10 6:46:47: EVT#10384-09/04/10 6:46:47: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(3202s) 09/04/10 6:56:17: EVT#10385-09/04/10 6:56:17: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(3772s) 09/04/10 7:07:56: EVT#10386-09/04/10 7:07:56: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 4e 48 a2 1e 00 10 00 00, Sense: f0 00 03 4e 48 b0 08 0a 00 00 00 00 11 00 00 00 0 09/04/10 7:07:56: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 09/04/10 7:07:56: ErrLBAOffset (dea) LBA(4e48a21e) BadLba=4e48b008 09/04/10 7:07:56: prCallback: Medium Error on pd=03, StartLba=4e48a21e, ErrLba=4e48b008 09/04/10 7:07:56: prRecQueue: starting pd=03 recovery - blocking host commands 09/04/10 7:07:56: prRecGo: Ready to attempt recovery errLBA=4e48b008 on pd=03 09/04/10 7:07:56: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=9c9160, strip=9c9160, startRef=0,type=8 09/04/10 7:07:56: prRecGo: data NOT valid in cache 09/04/10 7:07:56: prRecCallback: READ from mirror arm successful; send WV to pd=03 09/04/10 7:07:56: prRecCallback: WV has successfully completed on pd=03 09/04/10 7:07:56: EVT#10387-09/04/10 7:07:56: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 4e48b008 09/04/10 7:15:52: EVT#10388-09/04/10 7:15:52: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(4947s) 09/04/10 7:21:59: EVT#10389-09/04/10 7:21:59: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(5314s) 09/04/10 7:45:49: EVT#10390-09/04/10 7:45:49: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(6744s) 09/04/10 7:51:01: EVT#10391-09/04/10 7:51:01: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(7056s) 09/04/10 8:19:37: EVT#10392-09/04/10 8:19:37: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(8772s) 09/04/10 8:25:37: EVT#10393-09/04/10 8:25:37: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(9132s) 09/04/10 8:25:39: prCallback: PR completed for pd=02 09/04/10 8:57:04: EVT#10394-09/04/10 8:57:04: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(11019s) 09/04/10 8:57:06: prCallback: PR completed for pd=03 09/04/10 8:57:06: PR cycle complete 09/04/10 8:57:06: EVT#10395-09/04/10 8:57:06: 35=Patrol Read complete 09/04/10 8:57:06: Next PR scheduled to start at 09/11/10 3:00:00 09/06/10 5:35:00: MPT_REC:Ioc Int/Ext Terminated pRdm a065f400, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/06/10 5:35:00: MPT_REC:Ioc Int/Ext Terminated pRdm a05fba00, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/06/10 5:35:00: MPT_REC:Ioc Int/Ext Terminated pRdm a067c000, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/06/10 5:35:00: MPT_REC:Ioc Int/Ext Terminated pRdm a07f0c00, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/06/10 5:35:00: EVT#10396-09/06/10 5:35:00: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 28 00 42 c2 18 4f 00 00 31 00, Sense: f0 00 03 42 c2 18 69 0a 00 00 00 00 11 00 00 00 0 09/06/10 5:35:00: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 09/06/10 5:35:00: ErrLBAOffset (1a) LBA(42c2184f) BadLba=42c21869 09/06/10 5:35:03: EVT#10397-09/06/10 5:35:03: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 28 00 42 c2 18 4f 00 00 31 00, Sense: f0 00 03 42 c2 18 69 0a 00 00 00 00 11 00 00 00 0 09/06/10 5:35:03: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 09/06/10 5:35:03: ErrLBAOffset (1a) LBA(42c2184f) BadLba=42c21869 09/06/10 5:35:03: EBB_RecoverReadErrors: Issue WV for pd=03, lba=42c21869 09/06/10 5:35:03: Issuing write verify pd=03, physArm=1, span=0, blk=42c21869 09/06/10 5:35:03: EVT#10398-09/06/10 5:35:03: 110=Corrected medium error during recovery on PD 03(e0x20/s3) at 42c21869 09/06/10 5:35:03: Issuing write verify pd=03, physArm=1, span=0, blk=42c21869 09/06/10 5:35:03: EVT#10399-09/06/10 5:35:03: 110=Corrected medium error during recovery on PD 03(e0x20/s3) at 42c21869 09/06/10 23:08:23: MPT_REC:Ioc Int/Ext Terminated pRdm a08a3c00, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/06/10 23:08:23: MPT_REC:Ioc Int/Ext Terminated pRdm a0560400, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/06/10 23:08:23: EVT#10400-09/06/10 23:08:23: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 28 00 42 3e 46 80 00 00 0f 00, Sense: f0 00 03 42 3e 46 8d 0a 00 00 00 00 11 00 00 00 0 09/06/10 23:08:23: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 09/06/10 23:08:23: ErrLBAOffset (d) LBA(423e4680) BadLba=423e468d 09/06/10 23:08:26: EVT#10401-09/06/10 23:08:26: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 28 00 42 3e 46 80 00 00 0f 00, Sense: f0 00 03 42 3e 46 8d 0a 00 00 00 00 11 00 00 00 0 09/06/10 23:08:26: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 09/06/10 23:08:26: ErrLBAOffset (d) LBA(423e4680) BadLba=423e468d 09/06/10 23:08:26: EBB_RecoverReadErrors: Issue WV for pd=03, lba=423e468d 09/06/10 23:08:26: Issuing write verify pd=03, physArm=1, span=0, blk=423e468d 09/06/10 23:08:26: EVT#10402-09/06/10 23:08:26: 110=Corrected medium error during recovery on PD 03(e0x20/s3) at 423e468d 09/06/10 23:08:26: Issuing write verify pd=02, physArm=0, span=0, blk=423e468d 09/06/10 23:08:26: EVT#10403-09/06/10 23:08:26: 110=Corrected medium error during recovery on PD 02(e0x20/s2) at 423e468d 09/07/10 22:41:16: MPT_REC:Ioc Int/Ext Terminated pRdm a0663200, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/07/10 22:41:16: MPT_REC:Ioc Int/Ext Terminated pRdm a058a400, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/07/10 22:41:16: MPT_REC:Ioc Int/Ext Terminated pRdm a05a6400, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/07/10 22:41:16: MPT_REC:Ioc Int/Ext Terminated pRdm a06a7c00, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/07/10 22:41:16: MPT_REC:Ioc Int/Ext Terminated pRdm a072d000, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/07/10 22:41:16: EVT#10404-09/07/10 22:41:16: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 28 00 43 0c 7d 80 00 00 17 00, Sense: f0 00 03 43 0c 7d 87 0a 00 00 00 00 11 00 00 00 0 09/07/10 22:41:16: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 09/07/10 22:41:16: ErrLBAOffset (7) LBA(430c7d80) BadLba=430c7d87 09/07/10 22:41:19: MPT_REC:Ioc Int/Ext Terminated pRdm a0720000, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/07/10 22:41:19: MPT_REC:Ioc Int/Ext Terminated pRdm a0743e00, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/07/10 22:41:19: MPT_REC:Ioc Int/Ext Terminated pRdm a0771800, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/07/10 22:41:19: MPT_REC:Ioc Int/Ext Terminated pRdm a088b400, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/07/10 22:41:19: MPT_REC:Ioc Int/Ext Terminated pRdm a05fa400, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/07/10 22:41:19: MPT_REC:Ioc Int/Ext Terminated pRdm a082a800, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/07/10 22:41:19: MPT_REC:Ioc Int/Ext Terminated pRdm a0746e00, DevId[3] Tgt 3 Ioc a00bf818, iocSts 804b iocLogInfo 31080000 Retry 0 09/07/10 22:41:19: EVT#10405-09/07/10 22:41:19: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 28 00 43 0c 7d 80 00 00 17 00, Sense: f0 00 03 43 0c 7d 87 0a 00 00 00 00 11 00 00 00 0 09/07/10 22:41:19: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 09/07/10 22:41:19: ErrLBAOffset (7) LBA(430c7d80) BadLba=430c7d87 09/07/10 22:41:20: EBB_RecoverReadErrors: Issue WV for pd=03, lba=430c7d87 09/07/10 22:41:20: Issuing write verify pd=03, physArm=1, span=0, blk=430c7d87 09/07/10 22:41:20: EVT#10406-09/07/10 22:41:20: 110=Corrected medium error during recovery on PD 03(e0x20/s3) at 430c7d87 09/07/10 22:41:22: Issuing write verify pd=02, physArm=0, span=0, blk=430c7d87 09/07/10 22:41:22: EVT#10407-09/07/10 22:41:22: 110=Corrected medium error during recovery on PD 02(e0x20/s2) at 430c7d87 09/11/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 09/11/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 09/11/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 09/11/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 09/11/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 09/11/10 3:00:00: EVT#10408-09/11/10 3:00:00: 39=Patrol Read started 09/11/10 3:00:00: EVT#10409-09/11/10 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 09/11/10 3:00:00: EVT#10410-09/11/10 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 09/11/10 3:00:00: EVT#10411-09/11/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 09/11/10 3:00:00: EVT#10412-09/11/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 09/11/10 3:02:31: EVT#10413-09/11/10 3:02:31: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(151s) 09/11/10 3:02:31: EVT#10414-09/11/10 3:02:31: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(151s) 09/11/10 3:04:56: EVT#10415-09/11/10 3:04:56: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(296s) 09/11/10 3:04:56: EVT#10416-09/11/10 3:04:56: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(296s) 09/11/10 3:07:30: EVT#10417-09/11/10 3:07:30: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(450s) 09/11/10 3:07:30: EVT#10418-09/11/10 3:07:30: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(450s) 09/11/10 3:09:26: EVT#10419-09/11/10 3:09:26: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(566s) 09/11/10 3:09:27: EVT#10420-09/11/10 3:09:27: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(567s) 09/11/10 3:12:33: EVT#10421-09/11/10 3:12:33: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(753s) 09/11/10 3:12:33: EVT#10422-09/11/10 3:12:33: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(753s) 09/11/10 3:15:45: EVT#10423-09/11/10 3:15:45: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(945s) 09/11/10 3:15:45: EVT#10424-09/11/10 3:15:45: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(945s) 09/11/10 3:18:25: EVT#10425-09/11/10 3:18:25: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1105s) 09/11/10 3:18:25: EVT#10426-09/11/10 3:18:25: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1105s) 09/11/10 3:18:35: EVT#10427-09/11/10 3:18:35: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1115s) 09/11/10 3:18:35: EVT#10428-09/11/10 3:18:35: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1115s) 09/11/10 3:21:37: EVT#10429-09/11/10 3:21:37: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1297s) 09/11/10 3:21:37: EVT#10430-09/11/10 3:21:37: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1297s) 09/11/10 3:24:36: EVT#10431-09/11/10 3:24:36: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1476s) 09/11/10 3:24:36: EVT#10432-09/11/10 3:24:36: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1476s) 09/11/10 3:28:21: EVT#10433-09/11/10 3:28:21: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1701s) 09/11/10 3:28:21: EVT#10434-09/11/10 3:28:21: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1701s) 09/11/10 3:28:21: prCallback: PR completed for pd=00 09/11/10 3:28:21: prCallback: PR completed for pd=01 09/11/10 3:37:27: EVT#10435-09/11/10 3:37:27: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2247s) 09/11/10 3:37:57: EVT#10436-09/11/10 3:37:57: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2277s) 09/11/10 3:56:53: EVT#10437-09/11/10 3:56:53: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3413s) 09/11/10 3:58:30: EVT#10438-09/11/10 3:58:30: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3510s) 09/11/10 4:17:12: EVT#10439-09/11/10 4:17:12: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4632s) 09/11/10 4:21:01: EVT#10440-09/11/10 4:21:01: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4861s) 09/11/10 4:38:27: EVT#10441-09/11/10 4:38:27: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5907s) 09/11/10 4:45:55: EVT#10442-09/11/10 4:45:55: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6355s) 09/11/10 5:00:44: EVT#10443-09/11/10 5:00:44: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7244s) 09/11/10 5:05:40: EVT#10444-09/11/10 5:05:40: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 43 0c 70 00 00 10 00 00, Sense: f0 00 03 43 0c 7d 88 0a 00 00 00 00 11 00 00 00 0 09/11/10 5:05:40: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 09/11/10 5:05:40: ErrLBAOffset (d88) LBA(430c7000) BadLba=430c7d88 09/11/10 5:05:40: prCallback: Medium Error on pd=03, StartLba=430c7000, ErrLba=430c7d88 09/11/10 5:05:40: prRecQueue: starting pd=03 recovery - blocking host commands 09/11/10 5:05:40: prRecGo: Ready to attempt recovery errLBA=430c7d88 on pd=03 09/11/10 5:05:40: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=8618fb, strip=8618fb, startRef=0,type=8 09/11/10 5:05:40: prRecGo: data NOT valid in cache 09/11/10 5:05:40: prRecCallback: READ from mirror arm successful; send WV to pd=03 09/11/10 5:05:40: prRecCallback: WV has successfully completed on pd=03 09/11/10 5:05:40: EVT#10445-09/11/10 5:05:40: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 430c7d88 09/11/10 5:09:03: EVT#10446-09/11/10 5:09:03: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 44 77 4d 89 00 10 00 00, Sense: f0 00 03 44 77 53 0f 0a 00 00 00 00 11 00 00 00 0 09/11/10 5:09:03: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 09/11/10 5:09:03: ErrLBAOffset (586) LBA(44774d89) BadLba=4477530f 09/11/10 5:09:03: prCallback: Medium Error on pd=03, StartLba=44774d89, ErrLba=4477530f 09/11/10 5:09:03: prRecQueue: starting pd=03 recovery - blocking host commands 09/11/10 5:09:03: prRecGo: Ready to attempt recovery errLBA=4477530f on pd=03 09/11/10 5:09:03: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=88eea6, strip=88eea6, startRef=0,type=f 09/11/10 5:09:03: prRecGo: data NOT valid in cache 09/11/10 5:09:03: prRecCallback: READ from mirror arm successful; send WV to pd=03 09/11/10 5:09:03: prRecCallback: WV has successfully completed on pd=03 09/11/10 5:09:03: EVT#10447-09/11/10 5:09:03: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 4477530f 09/11/10 5:12:25: EVT#10448-09/11/10 5:12:25: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(7945s) 09/11/10 5:24:20: EVT#10449-09/11/10 5:24:20: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8660s) 09/11/10 5:41:13: EVT#10450-09/11/10 5:41:13: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9673s) 09/11/10 5:50:11: EVT#10451-09/11/10 5:50:11: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10211s) 09/11/10 6:11:08: EVT#10452-09/11/10 6:11:08: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11468s) 09/11/10 6:19:29: EVT#10453-09/11/10 6:19:29: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11969s) 09/11/10 6:44:19: EVT#10454-09/11/10 6:44:19: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13459s) 09/11/10 6:54:08: EVT#10455-09/11/10 6:54:08: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14048s) 09/11/10 6:54:10: prCallback: PR completed for pd=02 09/11/10 7:21:32: EVT#10456-09/11/10 7:21:32: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15692s) 09/11/10 7:21:34: prCallback: PR completed for pd=03 09/11/10 7:21:34: PR cycle complete 09/11/10 7:21:34: EVT#10457-09/11/10 7:21:34: 35=Patrol Read complete 09/11/10 7:21:34: Next PR scheduled to start at 09/18/10 3:00:00 09/18/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 09/18/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 09/18/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 09/18/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 09/18/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 09/18/10 3:00:00: EVT#10458-09/18/10 3:00:00: 39=Patrol Read started 09/18/10 3:00:00: EVT#10459-09/18/10 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 09/18/10 3:00:00: EVT#10460-09/18/10 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 09/18/10 3:00:00: EVT#10461-09/18/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 09/18/10 3:00:00: EVT#10462-09/18/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 09/18/10 3:02:23: EVT#10463-09/18/10 3:02:23: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(143s) 09/18/10 3:02:23: EVT#10464-09/18/10 3:02:23: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(143s) 09/18/10 3:05:36: EVT#10465-09/18/10 3:05:36: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(336s) 09/18/10 3:05:36: EVT#10466-09/18/10 3:05:36: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(336s) 09/18/10 3:07:46: EVT#10467-09/18/10 3:07:46: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(466s) 09/18/10 3:07:46: EVT#10468-09/18/10 3:07:46: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(466s) 09/18/10 3:09:51: EVT#10469-09/18/10 3:09:51: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(591s) 09/18/10 3:09:51: EVT#10470-09/18/10 3:09:51: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(591s) 09/18/10 3:12:33: EVT#10471-09/18/10 3:12:33: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(753s) 09/18/10 3:12:33: EVT#10472-09/18/10 3:12:33: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(753s) 09/18/10 3:15:53: EVT#10473-09/18/10 3:15:53: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(953s) 09/18/10 3:15:53: EVT#10474-09/18/10 3:15:53: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(953s) 09/18/10 3:18:17: EVT#10475-09/18/10 3:18:17: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1097s) 09/18/10 3:18:17: EVT#10476-09/18/10 3:18:17: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1097s) 09/18/10 3:18:35: EVT#10477-09/18/10 3:18:35: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1115s) 09/18/10 3:18:35: EVT#10478-09/18/10 3:18:35: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1115s) 09/18/10 3:21:37: EVT#10479-09/18/10 3:21:37: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1297s) 09/18/10 3:21:37: EVT#10480-09/18/10 3:21:37: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1297s) 09/18/10 3:24:52: EVT#10481-09/18/10 3:24:52: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1492s) 09/18/10 3:24:52: EVT#10482-09/18/10 3:24:52: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1492s) 09/18/10 3:28:21: EVT#10483-09/18/10 3:28:21: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1701s) 09/18/10 3:28:21: EVT#10484-09/18/10 3:28:21: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1701s) 09/18/10 3:28:21: prCallback: PR completed for pd=00 09/18/10 3:28:21: prCallback: PR completed for pd=01 09/18/10 3:37:19: EVT#10485-09/18/10 3:37:19: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2239s) 09/18/10 3:37:47: EVT#10486-09/18/10 3:37:47: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2267s) 09/18/10 3:56:44: EVT#10487-09/18/10 3:56:44: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3404s) 09/18/10 3:58:16: EVT#10488-09/18/10 3:58:16: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3496s) 09/18/10 4:17:03: EVT#10489-09/18/10 4:17:03: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4623s) 09/18/10 4:20:32: EVT#10490-09/18/10 4:20:32: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4832s) 09/18/10 4:38:15: EVT#10491-09/18/10 4:38:15: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5895s) 09/18/10 4:45:09: EVT#10492-09/18/10 4:45:09: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6309s) 09/18/10 5:00:36: EVT#10493-09/18/10 5:00:36: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7236s) 09/18/10 5:11:20: EVT#10494-09/18/10 5:11:20: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(7880s) 09/18/10 5:24:11: EVT#10495-09/18/10 5:24:11: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8651s) 09/18/10 5:39:23: EVT#10496-09/18/10 5:39:23: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9563s) 09/18/10 5:50:03: EVT#10497-09/18/10 5:50:03: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10203s) 09/18/10 6:08:54: EVT#10498-09/18/10 6:08:54: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11334s) 09/18/10 6:19:17: EVT#10499-09/18/10 6:19:17: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11957s) 09/18/10 6:41:54: EVT#10500-09/18/10 6:41:54: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13314s) 09/18/10 6:53:52: EVT#10501-09/18/10 6:53:52: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14032s) 09/18/10 6:53:53: prCallback: PR completed for pd=02 09/18/10 7:19:16: EVT#10502-09/18/10 7:19:16: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15556s) 09/18/10 7:19:18: prCallback: PR completed for pd=03 09/18/10 7:19:18: PR cycle complete 09/18/10 7:19:18: EVT#10503-09/18/10 7:19:18: 35=Patrol Read complete 09/18/10 7:19:18: Next PR scheduled to start at 09/25/10 3:00:00 09/25/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 09/25/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 09/25/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 09/25/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 09/25/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 09/25/10 3:00:00: EVT#10504-09/25/10 3:00:00: 39=Patrol Read started 09/25/10 3:00:00: EVT#10505-09/25/10 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 09/25/10 3:00:00: EVT#10506-09/25/10 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 09/25/10 3:00:00: EVT#10507-09/25/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 09/25/10 3:00:00: EVT#10508-09/25/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 09/25/10 3:02:07: EVT#10509-09/25/10 3:02:07: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(127s) 09/25/10 3:02:07: EVT#10510-09/25/10 3:02:07: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(127s) 09/25/10 3:04:16: EVT#10511-09/25/10 3:04:16: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(256s) 09/25/10 3:04:16: EVT#10512-09/25/10 3:04:16: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(256s) 09/25/10 3:06:34: EVT#10513-09/25/10 3:06:34: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(394s) 09/25/10 3:06:34: EVT#10514-09/25/10 3:06:34: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(394s) 09/25/10 3:08:31: EVT#10515-09/25/10 3:08:31: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(511s) 09/25/10 3:08:31: EVT#10516-09/25/10 3:08:31: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(511s) 09/25/10 3:10:49: EVT#10517-09/25/10 3:10:49: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(649s) 09/25/10 3:10:49: EVT#10518-09/25/10 3:10:49: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(649s) 09/25/10 3:13:13: EVT#10519-09/25/10 3:13:13: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(793s) 09/25/10 3:13:13: EVT#10520-09/25/10 3:13:13: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(793s) 09/25/10 3:15:53: EVT#10521-09/25/10 3:15:53: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(953s) 09/25/10 3:15:53: EVT#10522-09/25/10 3:15:53: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(953s) 09/25/10 3:18:25: EVT#10523-09/25/10 3:18:25: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1105s) 09/25/10 3:18:25: EVT#10524-09/25/10 3:18:25: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1105s) 09/25/10 3:18:34: EVT#10525-09/25/10 3:18:34: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1114s) 09/25/10 3:18:34: EVT#10526-09/25/10 3:18:34: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1114s) 09/25/10 3:21:24: EVT#10527-09/25/10 3:21:24: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1284s) 09/25/10 3:21:24: EVT#10528-09/25/10 3:21:24: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1284s) 09/25/10 3:24:37: EVT#10529-09/25/10 3:24:37: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1477s) 09/25/10 3:24:37: EVT#10530-09/25/10 3:24:37: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1477s) 09/25/10 3:24:37: prCallback: PR completed for pd=00 09/25/10 3:24:37: prCallback: PR completed for pd=01 09/25/10 3:37:26: EVT#10531-09/25/10 3:37:26: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2246s) 09/25/10 3:37:54: EVT#10532-09/25/10 3:37:54: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2274s) 09/25/10 3:56:51: EVT#10533-09/25/10 3:56:51: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3411s) 09/25/10 3:58:22: EVT#10534-09/25/10 3:58:22: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3502s) 09/25/10 4:17:10: EVT#10535-09/25/10 4:17:10: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4630s) 09/25/10 4:20:40: EVT#10536-09/25/10 4:20:40: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4840s) 09/25/10 4:38:23: EVT#10537-09/25/10 4:38:23: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5903s) 09/25/10 4:45:35: EVT#10538-09/25/10 4:45:35: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6335s) 09/25/10 5:00:34: EVT#10539-09/25/10 5:00:34: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7234s) 09/25/10 5:11:38: EVT#10540-09/25/10 5:11:38: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(7898s) 09/25/10 5:24:09: EVT#10541-09/25/10 5:24:09: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8649s) 09/25/10 5:39:20: EVT#10542-09/25/10 5:39:20: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9560s) 09/25/10 5:49:57: EVT#10543-09/25/10 5:49:57: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10197s) 09/25/10 6:08:35: EVT#10544-09/25/10 6:08:35: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11315s) 09/25/10 6:19:08: EVT#10545-09/25/10 6:19:08: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11948s) 09/25/10 6:41:26: EVT#10546-09/25/10 6:41:26: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13286s) 09/25/10 6:53:42: EVT#10547-09/25/10 6:53:42: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14022s) 09/25/10 6:53:44: prCallback: PR completed for pd=02 09/25/10 7:18:41: EVT#10548-09/25/10 7:18:41: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15521s) 09/25/10 7:18:43: prCallback: PR completed for pd=03 09/25/10 7:18:43: PR cycle complete 09/25/10 7:18:43: EVT#10549-09/25/10 7:18:43: 35=Patrol Read complete 09/25/10 7:18:43: Next PR scheduled to start at 10/02/10 3:00:00 09/30/10 16:26:45: EVT#10550-09/30/10 16:26:45: 157=Battery relearn will start in 4 days 10/02/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 10/02/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 10/02/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 10/02/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 10/02/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 10/02/10 3:00:00: EVT#10551-10/02/10 3:00:00: 39=Patrol Read started 10/02/10 3:00:00: EVT#10552-10/02/10 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 10/02/10 3:00:00: EVT#10553-10/02/10 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 10/02/10 3:00:00: EVT#10554-10/02/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 10/02/10 3:00:00: EVT#10555-10/02/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 10/02/10 3:02:23: EVT#10556-10/02/10 3:02:23: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(143s) 10/02/10 3:02:23: EVT#10557-10/02/10 3:02:23: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(143s) 10/02/10 3:05:12: EVT#10558-10/02/10 3:05:12: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(312s) 10/02/10 3:05:12: EVT#10559-10/02/10 3:05:12: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(312s) 10/02/10 3:07:22: EVT#10560-10/02/10 3:07:22: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(442s) 10/02/10 3:07:22: EVT#10561-10/02/10 3:07:22: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(442s) 10/02/10 3:09:27: EVT#10562-10/02/10 3:09:27: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(567s) 10/02/10 3:09:27: EVT#10563-10/02/10 3:09:27: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(567s) 10/02/10 3:12:01: EVT#10564-10/02/10 3:12:01: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(721s) 10/02/10 3:12:01: EVT#10565-10/02/10 3:12:01: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(721s) 10/02/10 3:14:57: EVT#10566-10/02/10 3:14:57: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(897s) 10/02/10 3:14:57: EVT#10567-10/02/10 3:14:57: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(897s) 10/02/10 3:17:37: EVT#10568-10/02/10 3:17:37: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1057s) 10/02/10 3:17:37: EVT#10569-10/02/10 3:17:37: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1057s) 10/02/10 3:18:26: EVT#10570-10/02/10 3:18:26: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1106s) 10/02/10 3:18:28: EVT#10571-10/02/10 3:18:28: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1108s) 10/02/10 3:20:41: EVT#10572-10/02/10 3:20:41: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1241s) 10/02/10 3:20:41: EVT#10573-10/02/10 3:20:41: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1241s) 10/02/10 3:23:48: EVT#10574-10/02/10 3:23:48: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1428s) 10/02/10 3:23:48: EVT#10575-10/02/10 3:23:48: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1428s) 10/02/10 3:27:33: EVT#10576-10/02/10 3:27:33: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1653s) 10/02/10 3:27:33: EVT#10577-10/02/10 3:27:33: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1653s) 10/02/10 3:27:33: prCallback: PR completed for pd=00 10/02/10 3:27:33: prCallback: PR completed for pd=01 10/02/10 3:37:19: EVT#10578-10/02/10 3:37:19: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2239s) 10/02/10 3:37:52: EVT#10579-10/02/10 3:37:52: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2272s) 10/02/10 3:56:45: EVT#10580-10/02/10 3:56:45: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3405s) 10/02/10 3:58:28: EVT#10581-10/02/10 3:58:28: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3508s) 10/02/10 4:17:04: EVT#10582-10/02/10 4:17:04: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4624s) 10/02/10 4:21:23: EVT#10583-10/02/10 4:21:23: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4883s) 10/02/10 4:22:24: EVT#10584-10/02/10 4:22:24: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 2f 0d f0 00 00 10 00 00, Sense: f0 00 03 2f 0d f2 1d 0a 00 00 00 00 11 00 00 00 0 10/02/10 4:22:24: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 10/02/10 4:22:24: ErrLBAOffset (21d) LBA(2f0df000) BadLba=2f0df21d 10/02/10 4:22:24: prCallback: Medium Error on pd=03, StartLba=2f0df000, ErrLba=2f0df21d 10/02/10 4:22:24: prRecQueue: starting pd=03 recovery - blocking host commands 10/02/10 4:22:24: prRecGo: Ready to attempt recovery errLBA=2f0df21d on pd=03 10/02/10 4:22:24: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=5e1be4, strip=5e1be4, startRef=0,type=1d 10/02/10 4:22:24: prRecGo: data NOT valid in cache 10/02/10 4:22:24: prRecCallback: READ from mirror arm successful; send WV to pd=03 10/02/10 4:22:24: prRecCallback: WV has successfully completed on pd=03 10/02/10 4:22:24: EVT#10585-10/02/10 4:22:24: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 2f0df21d 10/02/10 4:38:18: EVT#10586-10/02/10 4:38:18: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5898s) 10/02/10 4:47:01: EVT#10587-10/02/10 4:47:01: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6421s) 10/02/10 5:00:40: EVT#10588-10/02/10 5:00:40: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7240s) 10/02/10 5:13:29: EVT#10589-10/02/10 5:13:29: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(8009s) 10/02/10 5:24:16: EVT#10590-10/02/10 5:24:16: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8656s) 10/02/10 5:41:48: EVT#10591-10/02/10 5:41:48: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9708s) 10/02/10 5:50:07: EVT#10592-10/02/10 5:50:07: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10207s) 10/02/10 6:11:28: EVT#10593-10/02/10 6:11:28: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11488s) 10/02/10 6:19:22: EVT#10594-10/02/10 6:19:22: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11962s) 10/02/10 6:44:57: EVT#10595-10/02/10 6:44:57: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13497s) 10/02/10 6:53:59: EVT#10596-10/02/10 6:53:59: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14039s) 10/02/10 6:54:01: prCallback: PR completed for pd=02 10/02/10 7:22:39: EVT#10597-10/02/10 7:22:39: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15759s) 10/02/10 7:22:41: prCallback: PR completed for pd=03 10/02/10 7:22:41: PR cycle complete 10/02/10 7:22:41: EVT#10598-10/02/10 7:22:41: 35=Patrol Read complete 10/02/10 7:22:41: Next PR scheduled to start at 10/09/10 3:00:00 10/02/10 16:27:20: EVT#10599-10/02/10 16:27:20: 158=Battery relearn will start in 2 day 10/03/10 16:27:05: EVT#10600-10/03/10 16:27:05: 159=Battery relearn will start in 1 day 10/04/10 8:11:35: PatrolReadTimer: Clearing PR completion bitmaps; next clear scheduled for 10/04/10 8:11:35 10/04/10 11:26:45: EVT#10601-10/04/10 11:26:45: 160=Battery relearn will start in 5 hours 10/04/10 16:27:55: EVT#10602-10/04/10 16:27:55: 155=Battery relearn pending: Battery is under charge 10/04/10 16:48:30: Battery fully charged: Starting a Learn cycle 10/04/10 16:48:30: EVT#10603-10/04/10 16:48:30: 151=Battery relearn started 10/04/10 16:49:35: EVT#10604-10/04/10 16:49:35: 148=Battery is discharging 10/04/10 16:49:35: EVT#10605-10/04/10 16:49:35: 152=Battery relearn in progress 10/04/10 17:39:20: EVT#10606-10/04/10 17:39:20: 162=Current capacity of the battery is below threshold 10/04/10 17:39:20: EVT#10607-10/04/10 17:39:20: 195=BBU disabled; changing WB virtual disks to WT 10/04/10 17:39:20: EVT#10608-10/04/10 17:39:20: 54=Policy change on VD 00/0 to [ID=00,dcp=01,ccp=00,ap=0,dc=0,dbgi=0] from [ID=00,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] 10/04/10 17:39:20: EVT#10609-10/04/10 17:39:20: 54=Policy change on VD 01/1 to [ID=01,dcp=01,ccp=00,ap=0,dc=0,dbgi=0] from [ID=01,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] 10/04/10 17:47:05: EVT#10610-10/04/10 17:47:05: 153=Battery relearn completed 10/04/10 17:47:05: Learn completed successfully 10/04/10 17:47:05: Next Learn will start on 01 02 2011 10/04/10 17:47:05: *** BATTERY FEATURE PROPERTIES *** 10/04/10 17:47:05: _________________________________________________ 10/04/10 17:47:05: Auto Learn Period : 90 days 10/04/10 17:47:05: Next Learn Time : 347305625 10/04/10 17:47:05: Battery ID : 383d0718 10/04/10 17:47:05: Delayed Learn Interval: 0 hours from scheduled time 10/04/10 17:47:05: Next Learn cheduled on: 01 02 2011 10/04/10 17:47:05: _________________________________________________ 10/04/10 17:47:20: EVT#10611-10/04/10 17:47:20: 147=Battery started charging 10/04/10 17:47:20: EVT#10612-10/04/10 17:47:20: 162=Current capacity of the battery is below threshold 10/04/10 18:35:00: EVT#10613-10/04/10 18:35:00: 163=Current capacity of the battery is above threshold 10/04/10 18:35:00: EVT#10614-10/04/10 18:35:00: 194=BBU enabled; changing WT virtual disks to WB 10/04/10 18:35:00: EVT#10615-10/04/10 18:35:00: 54=Policy change on VD 00/0 to [ID=00,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] from [ID=00,dcp=01,ccp=00,ap=0,dc=0,dbgi=0] 10/04/10 18:35:00: EVT#10616-10/04/10 18:35:00: 54=Policy change on VD 01/1 to [ID=01,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] from [ID=01,dcp=01,ccp=00,ap=0,dc=0,dbgi=0] 10/04/10 20:29:50: EVT#10617-10/04/10 20:29:50: 242=Battery charge complete 10/09/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 10/09/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 10/09/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 10/09/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 10/09/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 10/09/10 3:00:00: EVT#10618-10/09/10 3:00:00: 39=Patrol Read started 10/09/10 3:00:00: EVT#10619-10/09/10 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 10/09/10 3:00:00: EVT#10620-10/09/10 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 10/09/10 3:00:00: EVT#10621-10/09/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 10/09/10 3:00:00: EVT#10622-10/09/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 10/09/10 3:02:23: EVT#10623-10/09/10 3:02:23: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(143s) 10/09/10 3:02:23: EVT#10624-10/09/10 3:02:23: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(143s) 10/09/10 3:05:20: EVT#10625-10/09/10 3:05:20: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(320s) 10/09/10 3:05:20: EVT#10626-10/09/10 3:05:20: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(320s) 10/09/10 3:07:46: EVT#10627-10/09/10 3:07:46: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(466s) 10/09/10 3:07:46: EVT#10628-10/09/10 3:07:46: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(466s) 10/09/10 3:10:47: EVT#10629-10/09/10 3:10:47: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(647s) 10/09/10 3:10:47: EVT#10630-10/09/10 3:10:47: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(647s) 10/09/10 3:13:13: EVT#10631-10/09/10 3:13:13: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(793s) 10/09/10 3:13:13: EVT#10632-10/09/10 3:13:13: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(793s) 10/09/10 3:16:41: EVT#10633-10/09/10 3:16:41: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(1001s) 10/09/10 3:16:41: EVT#10634-10/09/10 3:16:41: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(1001s) 10/09/10 3:18:27: EVT#10635-10/09/10 3:18:27: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1107s) 10/09/10 3:18:28: EVT#10636-10/09/10 3:18:28: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1108s) 10/09/10 3:19:53: EVT#10637-10/09/10 3:19:53: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1193s) 10/09/10 3:19:53: EVT#10638-10/09/10 3:19:53: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1193s) 10/09/10 3:23:05: EVT#10639-10/09/10 3:23:05: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1385s) 10/09/10 3:23:05: EVT#10640-10/09/10 3:23:05: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1385s) 10/09/10 3:26:52: EVT#10641-10/09/10 3:26:52: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1612s) 10/09/10 3:26:52: EVT#10642-10/09/10 3:26:52: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1612s) 10/09/10 3:30:45: EVT#10643-10/09/10 3:30:45: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1845s) 10/09/10 3:30:45: EVT#10644-10/09/10 3:30:45: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1845s) 10/09/10 3:30:45: prCallback: PR completed for pd=00 10/09/10 3:30:45: prCallback: PR completed for pd=01 10/09/10 3:37:20: EVT#10645-10/09/10 3:37:20: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2240s) 10/09/10 3:37:51: EVT#10646-10/09/10 3:37:51: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2271s) 10/09/10 3:56:50: EVT#10647-10/09/10 3:56:50: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3410s) 10/09/10 3:58:27: EVT#10648-10/09/10 3:58:27: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3507s) 10/09/10 4:17:09: EVT#10649-10/09/10 4:17:09: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4629s) 10/09/10 4:21:05: EVT#10650-10/09/10 4:21:05: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4865s) 10/09/10 4:38:23: EVT#10651-10/09/10 4:38:23: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5903s) 10/09/10 4:45:57: EVT#10652-10/09/10 4:45:57: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6357s) 10/09/10 5:00:47: EVT#10653-10/09/10 5:00:47: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7247s) 10/09/10 5:12:22: EVT#10654-10/09/10 5:12:22: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(7942s) 10/09/10 5:24:14: EVT#10655-10/09/10 5:24:14: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8654s) 10/09/10 5:41:11: EVT#10656-10/09/10 5:41:11: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9671s) 10/09/10 5:50:16: EVT#10657-10/09/10 5:50:16: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10216s) 10/09/10 6:11:04: EVT#10658-10/09/10 6:11:04: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11464s) 10/09/10 6:19:25: EVT#10659-10/09/10 6:19:25: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11965s) 10/09/10 6:44:17: EVT#10660-10/09/10 6:44:17: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13457s) 10/09/10 6:54:03: EVT#10661-10/09/10 6:54:03: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14043s) 10/09/10 6:54:05: prCallback: PR completed for pd=02 10/09/10 7:22:08: EVT#10662-10/09/10 7:22:08: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15728s) 10/09/10 7:22:10: prCallback: PR completed for pd=03 10/09/10 7:22:10: PR cycle complete 10/09/10 7:22:10: EVT#10663-10/09/10 7:22:10: 35=Patrol Read complete 10/09/10 7:22:10: Next PR scheduled to start at 10/16/10 3:00:00 T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: DRAM Sig from the Prev boot T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#10664-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#10665-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 1 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#10666-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 96 % T3: Absolute State of Charge : 44 % T3: Remaining Capacity : 836 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 73 Min T3: Average Time to Empty : 673 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 25 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 3867 V T3: Current : -685 mA GasGaugeStat : c0 T3: GPID : efffb899 ChargerStatus : 3 T3: Remaining Capacity : 836 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 96 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#10667-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#10668-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#10669-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#10670-T22: 91=Inserted: Encl PD 20 T22: EVT#10671-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#10672-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#10673-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#10674-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#10675-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#10676-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#10677-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#10678-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#10679-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#10680-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#10681-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T32: EVT#10682-T32: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T32: EVT#10683-T32: 249=VD 01/1 is now OPTIMAL T32: Memory End affffff0 T32: Total memory available for disk cache: e6efbf0 T32: Total Number of Cache Lines 3648 T32: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T32: Cache initialization complete...Config info T32: ARs configured: 2 T32: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T32: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T32: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T32: span 0: sBlk=00000000, nBlk=11040000, ar=0 T32: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T32: span 0: sBlk=00000000, nBlk=74600000, ar=1 T32: Contiguous Triplet Usage: SS[64K]=0 T32: pdFailHistInit: count=0 T32: pdFailHistInit: count=0 T32: Initializing write journal entries T32: EVT#10684-T32: 12=Cache data recovered successfully T32: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=10/13 8:50:10 + rtc=33 to set timestamp 10/13/10 8:51:23: EVT#10685-10/13/10 8:51:23: 44=Time established as 10/13/10 8:51:23; (34 seconds since power on) 10/13/10 8:51:57: EVT#10686-10/13/10 8:51:57: 149=Battery temperature is normal 10/13/10 8:51:57: EVT#10687-10/13/10 8:51:57: 147=Battery started charging 10/13/10 8:51:57: EVT#10688-10/13/10 8:51:57: 163=Current capacity of the battery is above threshold 10/13/10 8:51:57: MfiCmdInitQueue: FW now OPERATIONAL 10/13/10 8:51:57: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 10/13/10 8:51:57: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 10/13/10 8:51:57: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 10/13/10 8:51:57: producerIndex=0 10/13/10 8:53:49: shutdownBlockDone: wait for all IO to complete 10/13/10 8:53:49: shutdownBlockDone: IO complete; wait for host command 10/13/10 8:53:49: EVT#10689-10/13/10 8:53:49: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#10690-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#10691-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#10692-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 97 % T3: Absolute State of Charge : 44 % T3: Remaining Capacity : 845 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 8 Min T3: Cycle Count : 25 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 4028 V T3: Current : 127 mA GasGaugeStat : 80 T3: GPID : 68ffb899 ChargerStatus : 2 T3: Remaining Capacity : 845 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 97 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#10693-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#10694-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#10695-T21: 91=Inserted: Encl PD 20 T21: EVT#10696-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#10697-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#10698-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#10699-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#10700-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#10701-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#10702-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#10703-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#10704-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#10705-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#10706-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T33: EVT#10707-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#10708-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=10/13 8:53:49 + rtc=33 to set timestamp 10/13/10 8:54:28: EVT#10709-10/13/10 8:54:28: 44=Time established as 10/13/10 8:54:28; (35 seconds since power on) 10/13/10 8:55:01: EVT#10710-10/13/10 8:55:01: 149=Battery temperature is normal 10/13/10 8:55:01: EVT#10711-10/13/10 8:55:01: 147=Battery started charging 10/13/10 8:55:01: EVT#10712-10/13/10 8:55:01: 163=Current capacity of the battery is above threshold 10/13/10 8:55:02: MfiCmdInitQueue: FW now OPERATIONAL 10/13/10 8:55:02: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 10/13/10 8:55:02: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 10/13/10 8:55:02: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 10/13/10 8:55:02: producerIndex=0 10/13/10 9:16:41: EVT#10713-10/13/10 9:16:41: 242=Battery charge complete 10/16/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 10/16/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 10/16/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 10/16/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 10/16/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 10/16/10 3:00:00: EVT#10714-10/16/10 3:00:00: 39=Patrol Read started 10/16/10 3:03:27: EVT#10715-10/16/10 3:03:27: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(207s) 10/16/10 3:03:27: EVT#10716-10/16/10 3:03:27: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(207s) 10/16/10 3:05:52: EVT#10717-10/16/10 3:05:52: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(352s) 10/16/10 3:05:52: EVT#10718-10/16/10 3:05:52: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(352s) 10/16/10 3:09:06: EVT#10719-10/16/10 3:09:06: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(546s) 10/16/10 3:09:06: EVT#10720-10/16/10 3:09:06: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(546s) 10/16/10 3:11:59: EVT#10721-10/16/10 3:11:59: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(719s) 10/16/10 3:11:59: EVT#10722-10/16/10 3:11:59: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(719s) 10/16/10 3:14:41: EVT#10723-10/16/10 3:14:41: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(881s) 10/16/10 3:14:41: EVT#10724-10/16/10 3:14:41: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(881s) 10/16/10 3:18:25: EVT#10725-10/16/10 3:18:25: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(1105s) 10/16/10 3:18:25: EVT#10726-10/16/10 3:18:25: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(1105s) 10/16/10 3:18:34: EVT#10727-10/16/10 3:18:34: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1114s) 10/16/10 3:18:37: EVT#10728-10/16/10 3:18:37: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1117s) 10/16/10 3:21:37: EVT#10729-10/16/10 3:21:37: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1297s) 10/16/10 3:21:37: EVT#10730-10/16/10 3:21:37: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1297s) 10/16/10 3:24:41: EVT#10731-10/16/10 3:24:41: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1481s) 10/16/10 3:24:41: EVT#10732-10/16/10 3:24:41: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1481s) 10/16/10 3:28:52: EVT#10733-10/16/10 3:28:52: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1732s) 10/16/10 3:28:52: EVT#10734-10/16/10 3:28:52: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1732s) 10/16/10 3:33:09: EVT#10735-10/16/10 3:33:09: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1989s) 10/16/10 3:33:09: prCallback: PR completed for pd=00 10/16/10 3:33:09: EVT#10736-10/16/10 3:33:09: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1989s) 10/16/10 3:33:09: prCallback: PR completed for pd=01 10/16/10 3:37:19: EVT#10737-10/16/10 3:37:19: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2239s) 10/16/10 3:38:03: EVT#10738-10/16/10 3:38:03: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2283s) 10/16/10 3:56:48: EVT#10739-10/16/10 3:56:48: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3408s) 10/16/10 3:58:42: EVT#10740-10/16/10 3:58:42: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3522s) 10/16/10 4:17:07: EVT#10741-10/16/10 4:17:07: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4627s) 10/16/10 4:21:21: EVT#10742-10/16/10 4:21:21: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4881s) 10/16/10 4:38:29: EVT#10743-10/16/10 4:38:29: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5909s) 10/16/10 4:46:36: EVT#10744-10/16/10 4:46:36: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6396s) 10/16/10 5:00:43: EVT#10745-10/16/10 5:00:43: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7243s) 10/16/10 5:13:24: EVT#10746-10/16/10 5:13:24: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(8004s) 10/16/10 5:24:18: EVT#10747-10/16/10 5:24:18: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8658s) 10/16/10 5:41:54: EVT#10748-10/16/10 5:41:54: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9714s) 10/16/10 5:50:11: EVT#10749-10/16/10 5:50:11: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10211s) 10/16/10 6:11:42: EVT#10750-10/16/10 6:11:42: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11502s) 10/16/10 6:19:25: EVT#10751-10/16/10 6:19:25: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11965s) 10/16/10 6:45:21: EVT#10752-10/16/10 6:45:21: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13521s) 10/16/10 6:54:03: EVT#10753-10/16/10 6:54:03: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14043s) 10/16/10 6:54:05: prCallback: PR completed for pd=02 10/16/10 7:23:19: EVT#10754-10/16/10 7:23:19: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15799s) 10/16/10 7:23:20: prCallback: PR completed for pd=03 10/16/10 7:23:20: PR cycle complete 10/16/10 7:23:20: EVT#10755-10/16/10 7:23:20: 35=Patrol Read complete 10/16/10 7:23:20: Next PR scheduled to start at 10/23/10 3:00:00 10/23/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 10/23/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 10/23/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 10/23/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 10/23/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 10/23/10 3:00:00: EVT#10756-10/23/10 3:00:00: 39=Patrol Read started 10/23/10 3:00:00: EVT#10757-10/23/10 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 10/23/10 3:00:00: EVT#10758-10/23/10 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 10/23/10 3:00:00: EVT#10759-10/23/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 10/23/10 3:00:00: EVT#10760-10/23/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 10/23/10 3:03:11: EVT#10761-10/23/10 3:03:11: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(191s) 10/23/10 3:03:11: EVT#10762-10/23/10 3:03:11: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(191s) 10/23/10 3:05:44: EVT#10763-10/23/10 3:05:44: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(344s) 10/23/10 3:05:44: EVT#10764-10/23/10 3:05:44: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(344s) 10/23/10 3:08:42: EVT#10765-10/23/10 3:08:42: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(522s) 10/23/10 3:08:42: EVT#10766-10/23/10 3:08:42: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(522s) 10/23/10 3:11:43: EVT#10767-10/23/10 3:11:43: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(703s) 10/23/10 3:11:43: EVT#10768-10/23/10 3:11:43: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(703s) 10/23/10 3:14:25: EVT#10769-10/23/10 3:14:25: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(865s) 10/23/10 3:14:25: EVT#10770-10/23/10 3:14:25: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(865s) 10/23/10 3:18:01: EVT#10771-10/23/10 3:18:01: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(1081s) 10/23/10 3:18:01: EVT#10772-10/23/10 3:18:01: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(1081s) 10/23/10 3:18:28: EVT#10773-10/23/10 3:18:28: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1108s) 10/23/10 3:18:31: EVT#10774-10/23/10 3:18:31: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1111s) 10/23/10 3:21:29: EVT#10775-10/23/10 3:21:29: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1289s) 10/23/10 3:21:29: EVT#10776-10/23/10 3:21:29: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1289s) 10/23/10 3:24:49: EVT#10777-10/23/10 3:24:49: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1489s) 10/23/10 3:24:49: EVT#10778-10/23/10 3:24:49: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1489s) 10/23/10 3:28:52: EVT#10779-10/23/10 3:28:52: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1732s) 10/23/10 3:28:52: EVT#10780-10/23/10 3:28:52: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1732s) 10/23/10 3:33:33: EVT#10781-10/23/10 3:33:33: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(2013s) 10/23/10 3:33:33: EVT#10782-10/23/10 3:33:33: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(2013s) 10/23/10 3:33:33: prCallback: PR completed for pd=00 10/23/10 3:33:33: prCallback: PR completed for pd=01 10/23/10 3:37:20: EVT#10783-10/23/10 3:37:20: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2240s) 10/23/10 3:37:59: EVT#10784-10/23/10 3:37:59: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2279s) 10/23/10 3:56:50: EVT#10785-10/23/10 3:56:50: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3410s) 10/23/10 3:58:43: EVT#10786-10/23/10 3:58:43: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3523s) 10/23/10 4:17:10: EVT#10787-10/23/10 4:17:10: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4630s) 10/23/10 4:22:10: EVT#10788-10/23/10 4:22:10: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4930s) 10/23/10 4:38:25: EVT#10789-10/23/10 4:38:25: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5905s) 10/23/10 4:48:25: EVT#10790-10/23/10 4:48:25: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6505s) 10/23/10 5:00:52: EVT#10791-10/23/10 5:00:52: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7252s) 10/23/10 5:15:46: EVT#10792-10/23/10 5:15:46: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(8146s) 10/23/10 5:24:21: EVT#10793-10/23/10 5:24:21: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8661s) 10/23/10 5:44:27: EVT#10794-10/23/10 5:44:27: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9867s) 10/23/10 5:50:25: EVT#10795-10/23/10 5:50:25: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10225s) 10/23/10 6:14:46: EVT#10796-10/23/10 6:14:46: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11686s) 10/23/10 6:19:36: EVT#10797-10/23/10 6:19:36: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11976s) 10/23/10 6:48:38: EVT#10798-10/23/10 6:48:38: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13718s) 10/23/10 6:54:17: EVT#10799-10/23/10 6:54:17: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14057s) 10/23/10 6:54:19: prCallback: PR completed for pd=02 10/23/10 7:27:00: EVT#10800-10/23/10 7:27:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(16020s) 10/23/10 7:27:01: prCallback: PR completed for pd=03 10/23/10 7:27:01: PR cycle complete 10/23/10 7:27:01: EVT#10801-10/23/10 7:27:01: 35=Patrol Read complete 10/23/10 7:27:01: Next PR scheduled to start at 10/30/10 3:00:00 10/30/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 10/30/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 10/30/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 10/30/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 10/30/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 10/30/10 3:00:00: EVT#10802-10/30/10 3:00:00: 39=Patrol Read started 10/30/10 3:00:00: EVT#10803-10/30/10 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 10/30/10 3:00:00: EVT#10804-10/30/10 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 10/30/10 3:00:00: EVT#10805-10/30/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 10/30/10 3:00:00: EVT#10806-10/30/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 10/30/10 3:02:55: EVT#10807-10/30/10 3:02:55: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(175s) 10/30/10 3:02:55: EVT#10808-10/30/10 3:02:55: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(175s) 10/30/10 3:05:20: EVT#10809-10/30/10 3:05:20: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(320s) 10/30/10 3:05:20: EVT#10810-10/30/10 3:05:20: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(320s) 10/30/10 3:08:34: EVT#10811-10/30/10 3:08:34: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(514s) 10/30/10 3:08:34: EVT#10812-10/30/10 3:08:34: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(514s) 10/30/10 3:11:27: EVT#10813-10/30/10 3:11:27: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(687s) 10/30/10 3:11:27: EVT#10814-10/30/10 3:11:27: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(687s) 10/30/10 3:14:33: EVT#10815-10/30/10 3:14:33: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(873s) 10/30/10 3:14:33: EVT#10816-10/30/10 3:14:33: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(873s) 10/30/10 3:18:17: EVT#10817-10/30/10 3:18:17: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(1097s) 10/30/10 3:18:17: EVT#10818-10/30/10 3:18:17: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(1097s) 10/30/10 3:18:35: EVT#10819-10/30/10 3:18:35: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1115s) 10/30/10 3:18:37: EVT#10820-10/30/10 3:18:37: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1117s) 10/30/10 3:21:53: EVT#10821-10/30/10 3:21:53: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1313s) 10/30/10 3:21:53: EVT#10822-10/30/10 3:21:53: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1313s) 10/30/10 3:24:57: EVT#10823-10/30/10 3:24:57: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1497s) 10/30/10 3:24:57: EVT#10824-10/30/10 3:24:57: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1497s) 10/30/10 3:29:24: EVT#10825-10/30/10 3:29:24: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1764s) 10/30/10 3:29:24: EVT#10826-10/30/10 3:29:24: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1764s) 10/30/10 3:33:41: EVT#10827-10/30/10 3:33:41: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(2021s) 10/30/10 3:33:41: EVT#10828-10/30/10 3:33:41: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(2021s) 10/30/10 3:33:41: prCallback: PR completed for pd=00 10/30/10 3:33:41: prCallback: PR completed for pd=01 10/30/10 3:37:28: EVT#10829-10/30/10 3:37:28: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2248s) 10/30/10 3:38:04: EVT#10830-10/30/10 3:38:04: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2284s) 10/30/10 3:56:49: EVT#10831-10/30/10 3:56:49: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3409s) 10/30/10 3:58:44: EVT#10832-10/30/10 3:58:44: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3524s) 10/30/10 4:17:17: EVT#10833-10/30/10 4:17:17: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4637s) 10/30/10 4:21:27: EVT#10834-10/30/10 4:21:27: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4887s) 10/30/10 4:38:31: EVT#10835-10/30/10 4:38:31: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5911s) 10/30/10 4:46:51: EVT#10836-10/30/10 4:46:51: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6411s) 10/30/10 5:00:49: EVT#10837-10/30/10 5:00:49: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7249s) 10/30/10 5:13:54: EVT#10838-10/30/10 5:13:54: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(8034s) 10/30/10 5:24:26: EVT#10839-10/30/10 5:24:26: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8666s) 10/30/10 5:42:37: EVT#10840-10/30/10 5:42:37: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9757s) 10/30/10 5:50:21: EVT#10841-10/30/10 5:50:21: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10221s) 10/30/10 6:12:40: EVT#10842-10/30/10 6:12:40: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11560s) 10/30/10 6:19:38: EVT#10843-10/30/10 6:19:38: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11978s) 10/30/10 6:46:30: EVT#10844-10/30/10 6:46:30: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13590s) 10/30/10 6:54:19: EVT#10845-10/30/10 6:54:19: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14059s) 10/30/10 6:54:20: prCallback: PR completed for pd=02 10/30/10 7:24:45: EVT#10846-10/30/10 7:24:45: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15885s) 10/30/10 7:24:47: prCallback: PR completed for pd=03 10/30/10 7:24:47: PR cycle complete 10/30/10 7:24:47: EVT#10847-10/30/10 7:24:47: 35=Patrol Read complete 10/30/10 7:24:47: Next PR scheduled to start at 11/06/10 3:00:00 11/03/10 8:11:35: PatrolReadTimer: Clearing PR completion bitmaps; next clear scheduled for 11/03/10 8:11:35 11/06/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 11/06/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 11/06/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 11/06/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 11/06/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 11/06/10 3:00:00: EVT#10848-11/06/10 3:00:00: 39=Patrol Read started 11/06/10 3:00:00: EVT#10849-11/06/10 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 11/06/10 3:00:00: EVT#10850-11/06/10 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 11/06/10 3:00:00: EVT#10851-11/06/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 11/06/10 3:00:00: EVT#10852-11/06/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 11/06/10 3:02:31: EVT#10853-11/06/10 3:02:31: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(151s) 11/06/10 3:02:31: EVT#10854-11/06/10 3:02:31: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(151s) 11/06/10 3:04:32: EVT#10855-11/06/10 3:04:32: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(272s) 11/06/10 3:04:32: EVT#10856-11/06/10 3:04:32: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(272s) 11/06/10 3:07:06: EVT#10857-11/06/10 3:07:06: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(426s) 11/06/10 3:07:06: EVT#10858-11/06/10 3:07:06: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(426s) 11/06/10 3:09:11: EVT#10859-11/06/10 3:09:11: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(551s) 11/06/10 3:09:11: EVT#10860-11/06/10 3:09:11: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(551s) 11/06/10 3:11:53: EVT#10861-11/06/10 3:11:53: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(713s) 11/06/10 3:11:53: EVT#10862-11/06/10 3:11:53: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(713s) 11/06/10 3:14:09: EVT#10863-11/06/10 3:14:09: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(849s) 11/06/10 3:14:09: EVT#10864-11/06/10 3:14:09: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(849s) 11/06/10 3:16:57: EVT#10865-11/06/10 3:16:57: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1017s) 11/06/10 3:16:57: EVT#10866-11/06/10 3:16:57: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1017s) 11/06/10 3:18:33: EVT#10867-11/06/10 3:18:33: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1113s) 11/06/10 3:18:35: EVT#10868-11/06/10 3:18:35: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1115s) 11/06/10 3:19:53: EVT#10869-11/06/10 3:19:53: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1193s) 11/06/10 3:19:53: EVT#10870-11/06/10 3:19:53: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1193s) 11/06/10 3:22:52: EVT#10871-11/06/10 3:22:52: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1372s) 11/06/10 3:22:52: EVT#10872-11/06/10 3:22:52: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1372s) 11/06/10 3:26:21: EVT#10873-11/06/10 3:26:21: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1581s) 11/06/10 3:26:21: EVT#10874-11/06/10 3:26:21: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1581s) 11/06/10 3:26:21: prCallback: PR completed for pd=00 11/06/10 3:26:21: prCallback: PR completed for pd=01 11/06/10 3:37:25: EVT#10875-11/06/10 3:37:25: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2245s) 11/06/10 3:37:58: EVT#10876-11/06/10 3:37:58: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2278s) 11/06/10 3:56:52: EVT#10877-11/06/10 3:56:52: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3412s) 11/06/10 3:58:31: EVT#10878-11/06/10 3:58:31: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3511s) 11/06/10 4:17:10: EVT#10879-11/06/10 4:17:10: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4630s) 11/06/10 4:20:57: EVT#10880-11/06/10 4:20:57: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4857s) 11/06/10 4:38:24: EVT#10881-11/06/10 4:38:24: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5904s) 11/06/10 4:45:51: EVT#10882-11/06/10 4:45:51: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6351s) 11/06/10 5:00:43: EVT#10883-11/06/10 5:00:43: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7243s) 11/06/10 5:12:18: EVT#10884-11/06/10 5:12:18: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(7938s) 11/06/10 5:24:12: EVT#10885-11/06/10 5:24:12: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8652s) 11/06/10 5:40:41: EVT#10886-11/06/10 5:40:41: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9641s) 11/06/10 5:50:04: EVT#10887-11/06/10 5:50:04: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10204s) 11/06/10 6:10:14: EVT#10888-11/06/10 6:10:14: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11414s) 11/06/10 6:19:16: EVT#10889-11/06/10 6:19:16: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11956s) 11/06/10 6:43:40: EVT#10890-11/06/10 6:43:40: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13420s) 11/06/10 6:53:52: EVT#10891-11/06/10 6:53:52: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14032s) 11/06/10 6:53:54: prCallback: PR completed for pd=02 11/06/10 7:21:34: EVT#10892-11/06/10 7:21:34: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15694s) 11/06/10 7:21:36: prCallback: PR completed for pd=03 11/06/10 7:21:36: PR cycle complete 11/06/10 7:21:36: EVT#10893-11/06/10 7:21:36: 35=Patrol Read complete 11/06/10 7:21:36: Next PR scheduled to start at 11/13/10 3:00:00 T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: DRAM Sig from the Prev boot T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#10894-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#10895-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 1 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#10896-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 46 % T3: Remaining Capacity : 868 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 75 Min T3: Average Time to Empty : 605 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 26 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 3882 V T3: Current : -689 mA GasGaugeStat : e0 T3: GPID : efffb899 ChargerStatus : 3 T3: Remaining Capacity : 868 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#10897-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#10898-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#10899-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#10900-T22: 91=Inserted: Encl PD 20 T22: EVT#10901-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#10902-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#10903-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#10904-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#10905-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#10906-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#10907-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#10908-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#10909-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#10910-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#10911-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T27: EVT#10912-T27: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T27: EVT#10913-T27: 249=VD 01/1 is now OPTIMAL T27: Memory End affffff0 T27: Total memory available for disk cache: e6efbf0 T27: Total Number of Cache Lines 3648 T27: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T27: Cache initialization complete...Config info T27: ARs configured: 2 T27: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T27: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T27: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T27: span 0: sBlk=00000000, nBlk=11040000, ar=0 T27: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T27: span 0: sBlk=00000000, nBlk=74600000, ar=1 T27: Contiguous Triplet Usage: SS[64K]=0 T27: pdFailHistInit: count=0 T28: pdFailHistInit: count=0 T28: Initializing write journal entries T28: EVT#10914-T28: 12=Cache data recovered successfully T28: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=11/10 6:22:37 + rtc=33 to set timestamp 11/10/10 6:23:42: EVT#10915-11/10/10 6:23:42: 44=Time established as 11/10/10 6:23:42; (34 seconds since power on) 11/10/10 6:24:14: MfiCmdInitQueue: FW now OPERATIONAL 11/10/10 6:24:14: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 11/10/10 6:24:14: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 11/10/10 6:24:14: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 11/10/10 6:24:14: producerIndex=0 11/10/10 6:24:16: EVT#10916-11/10/10 6:24:16: 149=Battery temperature is normal 11/10/10 6:24:16: EVT#10917-11/10/10 6:24:16: 147=Battery started charging 11/10/10 6:24:16: EVT#10918-11/10/10 6:24:16: 163=Current capacity of the battery is above threshold 11/10/10 6:34:01: EVT#10919-11/10/10 6:34:01: 242=Battery charge complete 11/10/10 12:22:09: shutdownBlockDone: wait for all IO to complete 11/10/10 12:22:09: shutdownBlockDone: IO complete; wait for host command 11/10/10 12:22:09: EVT#10920-11/10/10 12:22:09: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#10921-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#10922-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#10923-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 98 % T3: Absolute State of Charge : 45 % T3: Remaining Capacity : 858 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 26 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 4027 V T3: Current : 0 mA GasGaugeStat : e0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 858 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 98 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#10924-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#10925-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#10926-T21: 91=Inserted: Encl PD 20 T21: EVT#10927-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#10928-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#10929-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#10930-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#10931-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#10932-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#10933-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#10934-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#10935-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#10936-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#10937-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T33: EVT#10938-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#10939-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=11/10 12:22:09 + rtc=33 to set timestamp 11/10/10 12:22:49: EVT#10940-11/10/10 12:22:49: 44=Time established as 11/10/10 12:22:49; (35 seconds since power on) 11/10/10 12:23:22: EVT#10941-11/10/10 12:23:22: 149=Battery temperature is normal 11/10/10 12:23:22: EVT#10942-11/10/10 12:23:22: 163=Current capacity of the battery is above threshold T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#10943-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#10944-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#10945-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 98 % T3: Absolute State of Charge : 45 % T3: Remaining Capacity : 856 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 75 Min T3: Average Time to Empty : 771 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 26 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 3880 V T3: Current : -688 mA GasGaugeStat : e0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 856 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 98 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#10946-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#10947-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#10948-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#10949-T22: 91=Inserted: Encl PD 20 T22: EVT#10950-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#10951-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#10952-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#10953-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#10954-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#10955-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#10956-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#10957-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#10958-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#10959-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#10960-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T30: EVT#10961-T30: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T30: EVT#10962-T30: 249=VD 01/1 is now OPTIMAL T30: Memory End affffff0 T30: Total memory available for disk cache: e6efbf0 T30: Total Number of Cache Lines 3648 T30: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T30: Cache initialization complete...Config info T30: ARs configured: 2 T30: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T30: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T30: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T30: span 0: sBlk=00000000, nBlk=11040000, ar=0 T30: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=01,ccp=01,ap=0,dc=0,dbgi=0] T30: span 0: sBlk=00000000, nBlk=74600000, ar=1 T30: Contiguous Triplet Usage: SS[64K]=0 T30: pdFailHistInit: count=0 T30: pdFailHistInit: count=0 T30: Initializing write journal entries T30: NOT Flushing Cache T30: RMW: NVRAM structure valid - checking for active RMWs T30: DDF_TimestampGet: using nvram time=11/10 12:24:59 + rtc=30 to set timestamp 11/10/10 12:25:45: EVT#10963-11/10/10 12:25:45: 44=Time established as 11/10/10 12:25:45; (30 seconds since power on) 11/10/10 12:25:46: LOAD section: src=fe19a357, size=1a69, dst=0, mode=1...done 11/10/10 12:25:46: LOAD section: src=fe160060, size=30fea, dst=a0200000, mode=1...done 11/10/10 12:25:46: LOAD section: src=fe191053, size=92fb, dst=a027bfc0, mode=1...done 11/10/10 12:25:46: CTLR version 1.11.52-0396 Date Feb 1 2008 Time 19:36:17 11/10/10 12:25:46: Vendor Id: 60 SubVId: 1f0c DevId: 1000 SubDevId: 1028 11/10/10 12:26:23: EVT#10964-11/10/10 12:26:23: 149=Battery temperature is normal 11/10/10 12:26:23: EVT#10965-11/10/10 12:26:23: 147=Battery started charging 11/10/10 12:26:23: EVT#10966-11/10/10 12:26:23: 163=Current capacity of the battery is above threshold 11/10/10 12:26:32: EVT#10967-11/10/10 12:26:32: 73=VD 00/0 Properties updated to [ID=00,dcp=00,ccp=01,ap=0,dc=0,dbgi=0] (from [ID=00,dcp=01,ccp=01,ap=0,dc=0,dbgi=0]) 11/10/10 12:27:05: EVT#10968-11/10/10 12:27:05: 73=VD 01/1 Properties updated to [ID=01,dcp=00,ccp=01,ap=0,dc=0,dbgi=0] (from [ID=01,dcp=01,ccp=01,ap=0,dc=0,dbgi=0]) 11/10/10 12:27:43: In SASPreBT here the _exitingApp = true T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#10969-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#10970-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#10971-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 45 % T3: Remaining Capacity : 861 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 75 Min T3: Average Time to Empty : 836 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 26 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 3906 V T3: Current : -690 mA GasGaugeStat : e0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 861 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#10972-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#10973-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#10974-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#10975-T22: 91=Inserted: Encl PD 20 T22: EVT#10976-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#10977-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#10978-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#10979-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#10980-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#10981-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#10982-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#10983-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#10984-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#10985-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#10986-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T33: EVT#10987-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#10988-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=00,ccp=00,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=00,ccp=00,ap=0,dc=0,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=11/10 12:27:53 + rtc=33 to set timestamp 11/10/10 12:28:43: EVT#10989-11/10/10 12:28:43: 44=Time established as 11/10/10 12:28:43; (34 seconds since power on) 11/10/10 12:29:17: EVT#10990-11/10/10 12:29:17: 149=Battery temperature is normal 11/10/10 12:29:17: EVT#10991-11/10/10 12:29:17: 147=Battery started charging 11/10/10 12:29:17: EVT#10992-11/10/10 12:29:17: 163=Current capacity of the battery is above threshold 11/10/10 12:29:18: MfiCmdInitQueue: FW now OPERATIONAL 11/10/10 12:29:18: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 11/10/10 12:29:18: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 11/10/10 12:29:18: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 11/10/10 12:29:18: producerIndex=0 11/10/10 12:39:02: EVT#10993-11/10/10 12:39:02: 242=Battery charge complete 11/10/10 12:43:22: EVT#10994-11/10/10 12:43:22: 73=VD 00/0 Properties updated to [ID=00,dcp=60,ccp=00,ap=0,dc=0,dbgi=0] (from [ID=00,dcp=00,ccp=00,ap=0,dc=0,dbgi=0]) 11/10/10 12:43:23: EVT#10995-11/10/10 12:43:23: 73=VD 01/1 Properties updated to [ID=01,dcp=60,ccp=00,ap=0,dc=0,dbgi=0] (from [ID=01,dcp=00,ccp=00,ap=0,dc=0,dbgi=0]) 11/10/10 12:44:13: EVT#10996-11/10/10 12:44:13: 73=VD 00/0 Properties updated to [ID=00,dcp=60,ccp=60,ap=0,dc=1,dbgi=0] (from [ID=00,dcp=60,ccp=60,ap=0,dc=0,dbgi=0]) 11/10/10 12:44:13: EVT#10997-11/10/10 12:44:13: 73=VD 01/1 Properties updated to [ID=01,dcp=60,ccp=60,ap=0,dc=1,dbgi=0] (from [ID=01,dcp=60,ccp=60,ap=0,dc=0,dbgi=0]) 11/10/10 12:46:54: EVT#10998-11/10/10 12:46:54: 73=VD 00/0 Properties updated to [ID=00,dcp=6c,ccp=60,ap=0,dc=1,dbgi=0] (from [ID=00,dcp=60,ccp=60,ap=0,dc=1,dbgi=0]) 11/10/10 12:46:54: EVT#10999-11/10/10 12:46:54: 73=VD 01/1 Properties updated to [ID=01,dcp=6c,ccp=60,ap=0,dc=1,dbgi=0] (from [ID=01,dcp=60,ccp=60,ap=0,dc=1,dbgi=0]) 11/10/10 12:47:09: EVT#11000-11/10/10 12:47:09: 73=VD 00/0 Properties updated to [ID=00,dcp=6d,ccp=6c,ap=0,dc=1,dbgi=0] (from [ID=00,dcp=6c,ccp=6c,ap=0,dc=1,dbgi=0]) 11/10/10 12:47:09: EVT#11001-11/10/10 12:47:09: 73=VD 01/1 Properties updated to [ID=01,dcp=6d,ccp=6c,ap=0,dc=1,dbgi=0] (from [ID=01,dcp=6c,ccp=6c,ap=0,dc=1,dbgi=0]) 11/10/10 13:13:14: shutdownBlockDone: wait for all IO to complete 11/10/10 13:13:14: shutdownBlockDone: IO complete; wait for host command 11/10/10 13:13:14: EVT#11002-11/10/10 13:13:14: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11003-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11004-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11005-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 46 % T3: Remaining Capacity : 867 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 26 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 21 C Voltage : 4027 V T3: Current : 0 mA GasGaugeStat : e0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 867 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11006-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11007-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11008-T21: 91=Inserted: Encl PD 20 T21: EVT#11009-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11010-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11011-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11012-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11013-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11014-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11015-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11016-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11017-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11018-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11019-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T33: EVT#11020-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#11021-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=11/10 13:13:14 + rtc=33 to set timestamp 11/10/10 13:13:52: EVT#11022-11/10/10 13:13:52: 44=Time established as 11/10/10 13:13:52; (34 seconds since power on) 11/10/10 13:14:26: EVT#11023-11/10/10 13:14:26: 149=Battery temperature is normal 11/10/10 13:14:26: EVT#11024-11/10/10 13:14:26: 163=Current capacity of the battery is above threshold T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11025-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11026-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11027-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 46 % T3: Remaining Capacity : 866 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 75 Min T3: Average Time to Empty : 780 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 26 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 3907 V T3: Current : -691 mA GasGaugeStat : e0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 866 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11028-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11029-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11030-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#11031-T22: 91=Inserted: Encl PD 20 T22: EVT#11032-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#11033-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#11034-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#11035-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#11036-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#11037-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#11038-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#11039-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#11040-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#11041-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#11042-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T32: EVT#11043-T32: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T32: EVT#11044-T32: 249=VD 01/1 is now OPTIMAL T32: Memory End affffff0 T32: Total memory available for disk cache: e6efbf0 T32: Total Number of Cache Lines 3648 T32: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T32: Cache initialization complete...Config info T32: ARs configured: 2 T32: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T32: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T32: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T32: span 0: sBlk=00000000, nBlk=11040000, ar=0 T32: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T32: span 0: sBlk=00000000, nBlk=74600000, ar=1 T32: Contiguous Triplet Usage: SS[64K]=0 T32: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=11/10 13:17:49 + rtc=33 to set timestamp 11/10/10 13:18:33: EVT#11045-11/10/10 13:18:33: 44=Time established as 11/10/10 13:18:33; (34 seconds since power on) 11/10/10 13:19:07: EVT#11046-11/10/10 13:19:07: 149=Battery temperature is normal 11/10/10 13:19:07: EVT#11047-11/10/10 13:19:07: 147=Battery started charging 11/10/10 13:19:07: EVT#11048-11/10/10 13:19:07: 163=Current capacity of the battery is above threshold 11/10/10 13:19:07: MfiCmdInitQueue: FW now OPERATIONAL 11/10/10 13:19:07: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 11/10/10 13:19:07: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 11/10/10 13:19:07: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 11/10/10 13:19:07: producerIndex=0 11/10/10 13:23:27: EVT#11049-11/10/10 13:23:27: 242=Battery charge complete 11/10/10 13:26:11: shutdownBlockDone: wait for all IO to complete 11/10/10 13:26:11: shutdownBlockDone: IO complete; wait for host command 11/10/10 13:26:11: EVT#11050-11/10/10 13:26:11: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11051-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11052-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11053-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 46 % T3: Remaining Capacity : 868 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 26 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 4047 V T3: Current : 0 mA GasGaugeStat : e0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 868 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11054-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11055-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11056-T21: 91=Inserted: Encl PD 20 T21: EVT#11057-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11058-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11059-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11060-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11061-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11062-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11063-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11064-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11065-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11066-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11067-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T34: EVT#11068-T34: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T34: EVT#11069-T34: 249=VD 01/1 is now OPTIMAL T34: Memory End affffff0 T34: Total memory available for disk cache: e6efbf0 T34: Total Number of Cache Lines 3648 T34: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T34: Cache initialization complete...Config info T34: ARs configured: 2 T34: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T34: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T34: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T34: span 0: sBlk=00000000, nBlk=11040000, ar=0 T34: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T34: span 0: sBlk=00000000, nBlk=74600000, ar=1 T34: Contiguous Triplet Usage: SS[64K]=0 T34: pdFailHistInit: count=0 T34: pdFailHistInit: count=0 T34: Initializing write journal entries T34: NOT Flushing Cache T34: RMW: NVRAM structure valid - checking for active RMWs T34: DDF_TimestampGet: using nvram time=11/10 13:26:11 + rtc=34 to set timestamp 11/10/10 13:26:51: EVT#11070-11/10/10 13:26:51: 44=Time established as 11/10/10 13:26:51; (35 seconds since power on) 11/10/10 13:27:23: MfiCmdInitQueue: FW now OPERATIONAL 11/10/10 13:27:23: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 11/10/10 13:27:23: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 11/10/10 13:27:23: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 11/10/10 13:27:23: producerIndex=0 11/10/10 13:27:24: EVT#11071-11/10/10 13:27:24: 149=Battery temperature is normal 11/10/10 13:27:24: EVT#11072-11/10/10 13:27:24: 163=Current capacity of the battery is above threshold 11/10/10 13:38:17: shutdownBlockDone: wait for all IO to complete 11/10/10 13:38:17: shutdownBlockDone: IO complete; wait for host command 11/10/10 13:38:17: EVT#11073-11/10/10 13:38:17: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11074-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11075-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11076-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 46 % T3: Remaining Capacity : 868 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 26 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 4047 V T3: Current : 0 mA GasGaugeStat : e0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 868 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11077-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11078-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11079-T21: 91=Inserted: Encl PD 20 T21: EVT#11080-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11081-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11082-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11083-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11084-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11085-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11086-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11087-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11088-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11089-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11090-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T34: EVT#11091-T34: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T34: EVT#11092-T34: 249=VD 01/1 is now OPTIMAL T34: Memory End affffff0 T34: Total memory available for disk cache: e6efbf0 T34: Total Number of Cache Lines 3648 T34: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T34: Cache initialization complete...Config info T34: ARs configured: 2 T34: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T34: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T34: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T34: span 0: sBlk=00000000, nBlk=11040000, ar=0 T34: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T34: span 0: sBlk=00000000, nBlk=74600000, ar=1 T34: Contiguous Triplet Usage: SS[64K]=0 T34: pdFailHistInit: count=0 T34: pdFailHistInit: count=0 T34: Initializing write journal entries T34: NOT Flushing Cache T34: RMW: NVRAM structure valid - checking for active RMWs T34: DDF_TimestampGet: using nvram time=11/10 13:38:17 + rtc=34 to set timestamp 11/10/10 13:38:57: EVT#11093-11/10/10 13:38:57: 44=Time established as 11/10/10 13:38:57; (35 seconds since power on) 11/10/10 13:39:30: EVT#11094-11/10/10 13:39:30: 149=Battery temperature is normal 11/10/10 13:39:30: EVT#11095-11/10/10 13:39:30: 163=Current capacity of the battery is above threshold 11/10/10 13:39:30: MfiCmdInitQueue: FW now OPERATIONAL 11/10/10 13:39:30: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 11/10/10 13:39:30: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 11/10/10 13:39:30: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 11/10/10 13:39:30: producerIndex=0 11/10/10 13:44:16: shutdownBlockDone: wait for all IO to complete 11/10/10 13:44:16: shutdownBlockDone: IO complete; wait for host command 11/10/10 13:44:16: EVT#11096-11/10/10 13:44:16: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11097-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11098-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11099-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 46 % T3: Remaining Capacity : 868 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 26 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 4047 V T3: Current : 0 mA GasGaugeStat : e0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 868 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11100-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11101-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11102-T21: 91=Inserted: Encl PD 20 T21: EVT#11103-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11104-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11105-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11106-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11107-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11108-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11109-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11110-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11111-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11112-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11113-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T28: EVT#11114-T28: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T28: EVT#11115-T28: 249=VD 01/1 is now OPTIMAL T28: Memory End affffff0 T28: Total memory available for disk cache: e6efbf0 T28: Total Number of Cache Lines 3648 T28: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T28: Cache initialization complete...Config info T28: ARs configured: 2 T28: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T28: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T28: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T28: span 0: sBlk=00000000, nBlk=11040000, ar=0 T28: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T28: span 0: sBlk=00000000, nBlk=74600000, ar=1 T28: Contiguous Triplet Usage: SS[64K]=0 T28: pdFailHistInit: count=0 T28: pdFailHistInit: count=0 T28: Initializing write journal entries T28: NOT Flushing Cache T28: RMW: NVRAM structure valid - checking for active RMWs T28: DDF_TimestampGet: using nvram time=11/10 13:44:16 + rtc=28 to set timestamp 11/10/10 13:44:49: EVT#11116-11/10/10 13:44:49: 44=Time established as 11/10/10 13:44:49; (29 seconds since power on) 11/10/10 13:45:19: MfiCmdInitQueue: FW now OPERATIONAL 11/10/10 13:45:19: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 11/10/10 13:45:19: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 11/10/10 13:45:19: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 11/10/10 13:45:19: producerIndex=0 11/10/10 13:45:28: EVT#11117-11/10/10 13:45:28: 149=Battery temperature is normal 11/10/10 13:45:28: EVT#11118-11/10/10 13:45:28: 163=Current capacity of the battery is above threshold 11/10/10 14:09:31: shutdownBlockDone: wait for all IO to complete 11/10/10 14:09:31: shutdownBlockDone: IO complete; wait for host command 11/10/10 14:09:31: EVT#11119-11/10/10 14:09:31: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11120-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11121-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11122-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 46 % T3: Remaining Capacity : 867 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 26 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 4037 V T3: Current : 0 mA GasGaugeStat : e0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 867 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11123-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11124-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11125-T21: 91=Inserted: Encl PD 20 T21: EVT#11126-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11127-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11128-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11129-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11130-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11131-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11132-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11133-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11134-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11135-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11136-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T32: EVT#11137-T32: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T32: EVT#11138-T32: 249=VD 01/1 is now OPTIMAL T32: Memory End affffff0 T32: Total memory available for disk cache: e6efbf0 T32: Total Number of Cache Lines 3648 T32: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T32: Cache initialization complete...Config info T32: ARs configured: 2 T32: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T32: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T32: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T32: span 0: sBlk=00000000, nBlk=11040000, ar=0 T32: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T32: span 0: sBlk=00000000, nBlk=74600000, ar=1 T32: Contiguous Triplet Usage: SS[64K]=0 T32: pdFailHistInit: count=0 T32: pdFailHistInit: count=0 T32: Initializing write journal entries T32: NOT Flushing Cache T32: RMW: NVRAM structure valid - checking for active RMWs T32: DDF_TimestampGet: using nvram time=11/10 14:09:31 + rtc=32 to set timestamp 11/10/10 14:10:08: EVT#11139-11/10/10 14:10:08: 44=Time established as 11/10/10 14:10:08; (33 seconds since power on) 11/10/10 14:10:09: LOAD section: src=fe19a357, size=1a69, dst=0, mode=1...done 11/10/10 14:10:09: LOAD section: src=fe160060, size=30fea, dst=a0200000, mode=1...done 11/10/10 14:10:09: LOAD section: src=fe191053, size=92fb, dst=a027bfc0, mode=1...done 11/10/10 14:10:09: CTLR version 1.11.52-0396 Date Feb 1 2008 Time 19:36:17 11/10/10 14:10:09: Vendor Id: 60 SubVId: 1f0c DevId: 1000 SubDevId: 1028 11/10/10 14:10:43: EVT#11140-11/10/10 14:10:43: 149=Battery temperature is normal 11/10/10 14:10:43: EVT#11141-11/10/10 14:10:43: 163=Current capacity of the battery is above threshold 11/10/10 14:19:29: In SASPreBT here the _exitingApp = true T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11142-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11143-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11144-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 46 % T3: Remaining Capacity : 865 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 75 Min T3: Average Time to Empty : 725 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 26 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 3916 V T3: Current : -691 mA GasGaugeStat : e0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 865 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11145-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11146-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11147-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#11148-T22: 91=Inserted: Encl PD 20 T22: EVT#11149-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#11150-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#11151-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#11152-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#11153-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#11154-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#11155-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#11156-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#11157-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#11158-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#11159-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T34: EVT#11160-T34: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T34: EVT#11161-T34: 249=VD 01/1 is now OPTIMAL T34: Memory End affffff0 T34: Total memory available for disk cache: e6efbf0 T34: Total Number of Cache Lines 3648 T34: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T34: Cache initialization complete...Config info T34: ARs configured: 2 T34: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T34: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T34: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T34: span 0: sBlk=00000000, nBlk=11040000, ar=0 T34: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T34: span 0: sBlk=00000000, nBlk=74600000, ar=1 T34: Contiguous Triplet Usage: SS[64K]=0 T34: pdFailHistInit: count=0 T34: pdFailHistInit: count=0 T34: Initializing write journal entries T34: NOT Flushing Cache T34: RMW: NVRAM structure valid - checking for active RMWs T34: DDF_TimestampGet: using nvram time=11/10 14:20:01 + rtc=34 to set timestamp 11/10/10 14:20:52: EVT#11162-11/10/10 14:20:52: 44=Time established as 11/10/10 14:20:52; (35 seconds since power on) 11/10/10 14:21:25: EVT#11163-11/10/10 14:21:25: 149=Battery temperature is normal 11/10/10 14:21:25: EVT#11164-11/10/10 14:21:25: 147=Battery started charging 11/10/10 14:21:25: EVT#11165-11/10/10 14:21:25: 163=Current capacity of the battery is above threshold 11/10/10 14:21:26: MfiCmdInitQueue: FW now OPERATIONAL 11/10/10 14:21:26: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 11/10/10 14:21:26: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 11/10/10 14:21:26: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 11/10/10 14:21:26: producerIndex=0 11/10/10 14:24:40: EVT#11166-11/10/10 14:24:40: 242=Battery charge complete 11/10/10 18:42:30: shutdownBlockDone: wait for all IO to complete 11/10/10 18:42:30: shutdownBlockDone: IO complete; wait for host command 11/10/10 18:42:30: EVT#11167-11/10/10 18:42:30: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11168-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11169-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11170-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 45 % T3: Remaining Capacity : 861 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 26 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 4027 V T3: Current : 0 mA GasGaugeStat : e0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 861 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11171-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11172-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11173-T21: 91=Inserted: Encl PD 20 T21: EVT#11174-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11175-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11176-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11177-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11178-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11179-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11180-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11181-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11182-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11183-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11184-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T34: EVT#11185-T34: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T34: EVT#11186-T34: 249=VD 01/1 is now OPTIMAL T34: Memory End affffff0 T34: Total memory available for disk cache: e6efbf0 T34: Total Number of Cache Lines 3648 T34: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T34: Cache initialization complete...Config info T34: ARs configured: 2 T34: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T34: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T34: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T34: span 0: sBlk=00000000, nBlk=11040000, ar=0 T34: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T34: span 0: sBlk=00000000, nBlk=74600000, ar=1 T34: Contiguous Triplet Usage: SS[64K]=0 T34: pdFailHistInit: count=0 T34: pdFailHistInit: count=0 T34: Initializing write journal entries T34: NOT Flushing Cache T34: RMW: NVRAM structure valid - checking for active RMWs T34: DDF_TimestampGet: using nvram time=11/10 18:42:30 + rtc=34 to set timestamp 11/10/10 18:43:10: EVT#11187-11/10/10 18:43:10: 44=Time established as 11/10/10 18:43:10; (35 seconds since power on) 11/10/10 18:43:43: EVT#11188-11/10/10 18:43:43: 149=Battery temperature is normal 11/10/10 18:43:43: EVT#11189-11/10/10 18:43:43: 163=Current capacity of the battery is above threshold 11/10/10 18:43:45: MfiCmdInitQueue: FW now OPERATIONAL 11/10/10 18:43:45: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 11/10/10 18:43:45: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 11/10/10 18:43:45: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 11/10/10 18:43:45: producerIndex=0 11/10/10 18:44:20: shutdownBlockDone: wait for all IO to complete 11/10/10 18:44:20: shutdownBlockDone: IO complete; wait for host command 11/10/10 18:44:20: EVT#11190-11/10/10 18:44:20: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11191-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11192-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11193-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 45 % T3: Remaining Capacity : 861 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 26 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 4027 V T3: Current : 0 mA GasGaugeStat : e0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 861 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11194-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11195-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11196-T21: 91=Inserted: Encl PD 20 T21: EVT#11197-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11198-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11199-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11200-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11201-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11202-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11203-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11204-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11205-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11206-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11207-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T33: EVT#11208-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#11209-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=11/10 18:44:20 + rtc=33 to set timestamp 11/10/10 18:44:59: EVT#11210-11/10/10 18:44:59: 44=Time established as 11/10/10 18:44:59; (34 seconds since power on) 11/10/10 18:45:33: EVT#11211-11/10/10 18:45:33: 149=Battery temperature is normal 11/10/10 18:45:33: EVT#11212-11/10/10 18:45:33: 163=Current capacity of the battery is above threshold 11/10/10 18:45:33: MfiCmdInitQueue: FW now OPERATIONAL 11/10/10 18:45:33: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 11/10/10 18:45:33: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 11/10/10 18:45:33: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 11/10/10 18:45:33: producerIndex=0 11/10/10 20:20:35: shutdownBlockDone: wait for all IO to complete 11/10/10 20:20:35: shutdownBlockDone: IO complete; wait for host command 11/10/10 20:20:35: EVT#11213-11/10/10 20:20:35: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11214-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11215-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11216-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 98 % T3: Absolute State of Charge : 45 % T3: Remaining Capacity : 858 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 26 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 4027 V T3: Current : 0 mA GasGaugeStat : e0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 858 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 98 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11217-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11218-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11219-T21: 91=Inserted: Encl PD 20 T21: EVT#11220-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11221-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11222-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11223-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11224-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11225-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11226-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11227-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11228-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11229-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11230-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T34: EVT#11231-T34: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T34: EVT#11232-T34: 249=VD 01/1 is now OPTIMAL T34: Memory End affffff0 T34: Total memory available for disk cache: e6efbf0 T34: Total Number of Cache Lines 3648 T34: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T34: Cache initialization complete...Config info T34: ARs configured: 2 T34: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T34: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T34: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T34: span 0: sBlk=00000000, nBlk=11040000, ar=0 T34: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T34: span 0: sBlk=00000000, nBlk=74600000, ar=1 T34: Contiguous Triplet Usage: SS[64K]=0 T34: pdFailHistInit: count=0 T34: pdFailHistInit: count=0 T34: Initializing write journal entries T34: NOT Flushing Cache T34: RMW: NVRAM structure valid - checking for active RMWs T34: DDF_TimestampGet: using nvram time=11/10 20:20:35 + rtc=34 to set timestamp 11/10/10 20:21:14: EVT#11233-11/10/10 20:21:14: 44=Time established as 11/10/10 20:21:14; (35 seconds since power on) 11/10/10 20:21:47: EVT#11234-11/10/10 20:21:47: 149=Battery temperature is normal 11/10/10 20:21:47: EVT#11235-11/10/10 20:21:47: 163=Current capacity of the battery is above threshold 11/10/10 20:21:59: MfiCmdInitQueue: FW now OPERATIONAL 11/10/10 20:21:59: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 11/10/10 20:21:59: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 11/10/10 20:21:59: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 11/10/10 20:21:59: producerIndex=0 11/10/10 20:21:59: EVT#11236-11/10/10 20:21:59: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 11/10/10 20:21:59: EVT#11237-11/10/10 20:21:59: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 11/10/10 20:21:59: EVT#11238-11/10/10 20:21:59: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 11/10/10 20:21:59: EVT#11239-11/10/10 20:21:59: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 11/10/10 20:21:59: EVT#11240-11/10/10 20:21:59: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 11/10/10 20:22:00: EVT#11241-11/10/10 20:22:00: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 11/11/10 19:54:27: EVT#11242-11/11/10 19:54:27: 147=Battery started charging 11/11/10 20:26:57: EVT#11243-11/11/10 20:26:57: 242=Battery charge complete 11/12/10 9:05:59: shutdownBlockDone: wait for all IO to complete 11/12/10 9:05:59: shutdownBlockDone: IO complete; wait for host command 11/12/10 9:05:59: EVT#11244-11/12/10 9:05:59: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11245-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11246-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11247-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 347305625 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 01 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 97 % T3: Absolute State of Charge : 44 % T3: Remaining Capacity : 845 mAh T3: Full Charge Capacity : 874 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 26 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 3993 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 845 mAh Full Charge Capacity: 874 mAh T3: Relative Stat of Charge : 97 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11248-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11249-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11250-T21: 91=Inserted: Encl PD 20 T21: EVT#11251-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11252-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11253-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11254-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11255-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11256-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11257-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11258-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11259-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11260-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11261-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T33: EVT#11262-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#11263-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=11/12 9:05:59 + rtc=33 to set timestamp 11/12/10 9:06:39: EVT#11264-11/12/10 9:06:39: 44=Time established as 11/12/10 9:06:39; (34 seconds since power on) 11/12/10 9:07:12: MfiCmdInitQueue: FW now OPERATIONAL 11/12/10 9:07:12: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 11/12/10 9:07:12: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 11/12/10 9:07:12: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 11/12/10 9:07:12: producerIndex=0 11/12/10 9:07:13: EVT#11265-11/12/10 9:07:13: 149=Battery temperature is normal 11/12/10 9:07:13: EVT#11266-11/12/10 9:07:13: 163=Current capacity of the battery is above threshold 11/12/10 21:59:38: EVT#11267-11/12/10 21:59:38: 147=Battery started charging 11/12/10 22:32:08: EVT#11268-11/12/10 22:32:08: 242=Battery charge complete 11/13/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 11/13/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 11/13/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 11/13/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 11/13/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 11/13/10 3:00:00: EVT#11269-11/13/10 3:00:00: 39=Patrol Read started 11/13/10 3:01:59: EVT#11270-11/13/10 3:01:59: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(119s) 11/13/10 3:01:59: EVT#11271-11/13/10 3:01:59: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(119s) 11/13/10 3:04:00: EVT#11272-11/13/10 3:04:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(240s) 11/13/10 3:04:00: EVT#11273-11/13/10 3:04:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(240s) 11/13/10 3:06:10: EVT#11274-11/13/10 3:06:10: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(370s) 11/13/10 3:06:18: EVT#11275-11/13/10 3:06:18: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(378s) 11/13/10 3:08:07: EVT#11276-11/13/10 3:08:07: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(487s) 11/13/10 3:08:15: EVT#11277-11/13/10 3:08:15: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(495s) 11/13/10 3:10:34: EVT#11278-11/13/10 3:10:34: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(634s) 11/13/10 3:10:50: EVT#11279-11/13/10 3:10:50: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(650s) 11/13/10 3:12:42: EVT#11280-11/13/10 3:12:42: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(762s) 11/13/10 3:13:13: EVT#11281-11/13/10 3:13:13: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(793s) 11/13/10 3:14:58: EVT#11282-11/13/10 3:14:58: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(898s) 11/13/10 3:15:38: EVT#11283-11/13/10 3:15:38: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(938s) 11/13/10 3:17:46: EVT#11284-11/13/10 3:17:46: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1066s) 11/13/10 3:18:10: EVT#11285-11/13/10 3:18:10: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1090s) 11/13/10 3:18:34: EVT#11286-11/13/10 3:18:34: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1114s) 11/13/10 3:18:36: EVT#11287-11/13/10 3:18:36: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1116s) 11/13/10 3:20:38: EVT#11288-11/13/10 3:20:38: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1238s) 11/13/10 3:21:10: EVT#11289-11/13/10 3:21:10: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1270s) 11/13/10 3:23:35: EVT#11290-11/13/10 3:23:35: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1415s) 11/13/10 3:23:35: prCallback: PR completed for pd=01 11/13/10 3:24:06: EVT#11291-11/13/10 3:24:06: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1446s) 11/13/10 3:24:07: prCallback: PR completed for pd=00 11/13/10 3:37:27: EVT#11292-11/13/10 3:37:27: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2247s) 11/13/10 3:38:00: EVT#11293-11/13/10 3:38:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2280s) 11/13/10 3:56:55: EVT#11294-11/13/10 3:56:55: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3415s) 11/13/10 3:58:37: EVT#11295-11/13/10 3:58:37: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3517s) 11/13/10 4:17:15: EVT#11296-11/13/10 4:17:15: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4635s) 11/13/10 4:21:27: EVT#11297-11/13/10 4:21:27: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4887s) 11/13/10 4:38:29: EVT#11298-11/13/10 4:38:29: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5909s) 11/13/10 4:46:56: EVT#11299-11/13/10 4:46:56: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6416s) 11/13/10 5:00:51: EVT#11300-11/13/10 5:00:51: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7251s) 11/13/10 5:13:38: EVT#11301-11/13/10 5:13:38: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(8018s) 11/13/10 5:24:20: EVT#11302-11/13/10 5:24:20: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8660s) 11/13/10 5:42:03: EVT#11303-11/13/10 5:42:03: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9723s) 11/13/10 5:50:21: EVT#11304-11/13/10 5:50:21: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10221s) 11/13/10 6:11:50: EVT#11305-11/13/10 6:11:50: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11510s) 11/13/10 6:19:34: EVT#11306-11/13/10 6:19:34: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11974s) 11/13/10 6:44:56: EVT#11307-11/13/10 6:44:56: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13496s) 11/13/10 6:54:16: EVT#11308-11/13/10 6:54:16: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14056s) 11/13/10 6:54:18: prCallback: PR completed for pd=02 11/13/10 7:22:44: EVT#11309-11/13/10 7:22:44: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15764s) 11/13/10 7:22:45: prCallback: PR completed for pd=03 11/13/10 7:22:45: PR cycle complete 11/13/10 7:22:45: EVT#11310-11/13/10 7:22:45: 35=Patrol Read complete 11/13/10 7:22:45: Next PR scheduled to start at 11/20/10 3:00:00 11/20/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 11/20/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 11/20/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 11/20/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 11/20/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 11/20/10 3:00:00: EVT#11311-11/20/10 3:00:00: 39=Patrol Read started 11/20/10 3:00:00: EVT#11312-11/20/10 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 11/20/10 3:00:00: EVT#11313-11/20/10 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 11/20/10 3:00:00: EVT#11314-11/20/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 11/20/10 3:00:00: EVT#11315-11/20/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 11/20/10 3:03:08: EVT#11316-11/20/10 3:03:08: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(188s) 11/20/10 3:03:08: EVT#11317-11/20/10 3:03:08: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(188s) 11/20/10 3:06:54: EVT#11318-11/20/10 3:06:54: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(414s) 11/20/10 3:07:00: EVT#11319-11/20/10 3:07:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(420s) 11/20/10 3:10:42: EVT#11320-11/20/10 3:10:42: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(642s) 11/20/10 3:10:58: EVT#11321-11/20/10 3:10:58: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(658s) 11/20/10 3:13:56: EVT#11322-11/20/10 3:13:56: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(836s) 11/20/10 3:14:27: EVT#11323-11/20/10 3:14:27: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(867s) 11/20/10 3:18:42: EVT#11324-11/20/10 3:18:42: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1122s) 11/20/10 3:18:46: EVT#11325-11/20/10 3:18:46: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1126s) 11/20/10 3:40:45: EVT#11326-11/20/10 3:40:45: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2445s) 11/20/10 3:42:01: EVT#11327-11/20/10 3:42:01: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2521s) 11/20/10 3:42:16: EVT#11328-11/20/10 3:42:16: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(2536s) 11/20/10 3:53:21: EVT#11329-11/20/10 3:53:21: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(3201s) 11/20/10 4:03:20: EVT#11330-11/20/10 4:03:20: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(3800s) 11/20/10 4:03:29: EVT#11331-11/20/10 4:03:29: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(3809s) 11/20/10 4:03:37: EVT#11332-11/20/10 4:03:37: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3817s) 11/20/10 4:06:09: EVT#11333-11/20/10 4:06:09: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(3969s) 11/20/10 4:06:10: EVT#11334-11/20/10 4:06:10: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3970s) 11/20/10 4:06:25: EVT#11335-11/20/10 4:06:25: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(3985s) 11/20/10 4:09:04: EVT#11336-11/20/10 4:09:04: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(4144s) 11/20/10 4:09:29: EVT#11337-11/20/10 4:09:29: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(4169s) 11/20/10 4:12:04: EVT#11338-11/20/10 4:12:04: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(4324s) 11/20/10 4:12:28: EVT#11339-11/20/10 4:12:28: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(4348s) 11/20/10 4:20:07: EVT#11340-11/20/10 4:20:07: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(4807s) 11/20/10 4:20:07: prCallback: PR completed for pd=00 11/20/10 4:22:47: EVT#11341-11/20/10 4:22:47: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(4967s) 11/20/10 4:22:47: prCallback: PR completed for pd=01 11/20/10 4:23:57: EVT#11342-11/20/10 4:23:57: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(5037s) 11/20/10 4:28:53: EVT#11343-11/20/10 4:28:53: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(5333s) 11/20/10 4:45:15: EVT#11344-11/20/10 4:45:15: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(6315s) 11/20/10 4:54:16: EVT#11345-11/20/10 4:54:16: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6856s) 11/20/10 5:07:35: EVT#11346-11/20/10 5:07:35: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7655s) 11/20/10 5:21:05: EVT#11347-11/20/10 5:21:05: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(8465s) 11/20/10 5:31:13: EVT#11348-11/20/10 5:31:13: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(9073s) 11/20/10 5:50:23: EVT#11349-11/20/10 5:50:23: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(10223s) 11/20/10 5:57:11: EVT#11350-11/20/10 5:57:11: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10631s) 11/20/10 6:20:56: EVT#11351-11/20/10 6:20:56: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(12056s) 11/20/10 6:26:38: EVT#11352-11/20/10 6:26:38: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(12398s) 11/20/10 6:54:48: EVT#11353-11/20/10 6:54:48: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(14088s) 11/20/10 7:01:24: EVT#11354-11/20/10 7:01:24: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14484s) 11/20/10 7:01:26: prCallback: PR completed for pd=02 11/20/10 7:33:07: EVT#11355-11/20/10 7:33:07: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(16387s) 11/20/10 7:33:09: prCallback: PR completed for pd=03 11/20/10 7:33:09: PR cycle complete 11/20/10 7:33:09: EVT#11356-11/20/10 7:33:09: 35=Patrol Read complete 11/20/10 7:33:09: Next PR scheduled to start at 11/27/10 3:00:00 11/27/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 11/27/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 11/27/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 11/27/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 11/27/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 11/27/10 3:00:00: EVT#11357-11/27/10 3:00:00: 39=Patrol Read started 11/27/10 3:00:00: EVT#11358-11/27/10 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 11/27/10 3:00:00: EVT#11359-11/27/10 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 11/27/10 3:00:00: EVT#11360-11/27/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 11/27/10 3:00:00: EVT#11361-11/27/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 11/27/10 3:02:07: EVT#11362-11/27/10 3:02:07: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(127s) 11/27/10 3:02:15: EVT#11363-11/27/10 3:02:15: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(135s) 11/27/10 3:04:00: EVT#11364-11/27/10 3:04:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(240s) 11/27/10 3:04:08: EVT#11365-11/27/10 3:04:08: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(248s) 11/27/10 3:06:26: EVT#11366-11/27/10 3:06:26: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(386s) 11/27/10 3:06:42: EVT#11367-11/27/10 3:06:42: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(402s) 11/27/10 3:08:39: EVT#11368-11/27/10 3:08:39: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(519s) 11/27/10 3:08:47: EVT#11369-11/27/10 3:08:47: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(527s) 11/27/10 3:11:06: EVT#11370-11/27/10 3:11:06: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(666s) 11/27/10 3:11:14: EVT#11371-11/27/10 3:11:14: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(674s) 11/27/10 3:13:13: EVT#11372-11/27/10 3:13:13: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(793s) 11/27/10 3:13:21: EVT#11373-11/27/10 3:13:21: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(801s) 11/27/10 3:15:54: EVT#11374-11/27/10 3:15:54: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(954s) 11/27/10 3:16:02: EVT#11375-11/27/10 3:16:02: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(962s) 11/27/10 3:18:26: EVT#11376-11/27/10 3:18:26: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1106s) 11/27/10 3:18:37: EVT#11377-11/27/10 3:18:37: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1117s) 11/27/10 3:18:37: EVT#11378-11/27/10 3:18:37: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1117s) 11/27/10 3:18:42: EVT#11379-11/27/10 3:18:42: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1122s) 11/27/10 3:21:34: EVT#11380-11/27/10 3:21:34: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1294s) 11/27/10 3:21:42: EVT#11381-11/27/10 3:21:42: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1302s) 11/27/10 3:24:31: EVT#11382-11/27/10 3:24:31: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1471s) 11/27/10 3:24:31: prCallback: PR completed for pd=01 11/27/10 3:24:38: EVT#11383-11/27/10 3:24:38: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1478s) 11/27/10 3:24:39: prCallback: PR completed for pd=00 11/27/10 3:37:30: EVT#11384-11/27/10 3:37:30: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2250s) 11/27/10 3:38:05: EVT#11385-11/27/10 3:38:05: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2285s) 11/27/10 3:57:01: EVT#11386-11/27/10 3:57:01: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3421s) 11/27/10 3:58:50: EVT#11387-11/27/10 3:58:50: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3530s) 11/27/10 4:17:23: EVT#11388-11/27/10 4:17:23: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4643s) 11/27/10 4:21:49: EVT#11389-11/27/10 4:21:49: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4909s) 11/27/10 4:38:40: EVT#11390-11/27/10 4:38:40: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5920s) 11/27/10 4:47:26: EVT#11391-11/27/10 4:47:26: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6446s) 11/27/10 5:01:11: EVT#11392-11/27/10 5:01:11: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7271s) 11/27/10 5:14:43: EVT#11393-11/27/10 5:14:43: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(8083s) 11/27/10 5:24:42: EVT#11394-11/27/10 5:24:42: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8682s) 11/27/10 5:43:38: EVT#11395-11/27/10 5:43:38: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9818s) 11/27/10 5:50:49: EVT#11396-11/27/10 5:50:49: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10249s) 11/27/10 6:13:51: EVT#11397-11/27/10 6:13:51: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11631s) 11/27/10 6:20:13: EVT#11398-11/27/10 6:20:13: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(12013s) 11/27/10 6:47:41: EVT#11399-11/27/10 6:47:41: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13661s) 11/27/10 6:55:02: EVT#11400-11/27/10 6:55:02: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14102s) 11/27/10 6:55:04: prCallback: PR completed for pd=02 11/27/10 7:25:54: EVT#11401-11/27/10 7:25:54: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15954s) 11/27/10 7:25:56: prCallback: PR completed for pd=03 11/27/10 7:25:56: PR cycle complete 11/27/10 7:25:56: EVT#11402-11/27/10 7:25:56: 35=Patrol Read complete 11/27/10 7:25:56: Next PR scheduled to start at 12/04/10 3:00:00 12/03/10 8:11:35: PatrolReadTimer: Clearing PR completion bitmaps; next clear scheduled for 12/03/10 8:11:35 12/04/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 12/04/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 12/04/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 12/04/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 12/04/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 12/04/10 3:00:00: EVT#11403-12/04/10 3:00:00: 39=Patrol Read started 12/04/10 3:00:00: EVT#11404-12/04/10 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 12/04/10 3:00:00: EVT#11405-12/04/10 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 12/04/10 3:00:00: EVT#11406-12/04/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 12/04/10 3:00:00: EVT#11407-12/04/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 12/04/10 3:02:08: EVT#11408-12/04/10 3:02:08: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(128s) 12/04/10 3:02:16: EVT#11409-12/04/10 3:02:16: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(136s) 12/04/10 3:04:08: EVT#11410-12/04/10 3:04:08: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(248s) 12/04/10 3:04:16: EVT#11411-12/04/10 3:04:16: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(256s) 12/04/10 3:06:42: EVT#11412-12/04/10 3:06:42: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(402s) 12/04/10 3:06:43: EVT#11413-12/04/10 3:06:43: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(403s) 12/04/10 3:08:47: EVT#11414-12/04/10 3:08:47: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(527s) 12/04/10 3:08:47: EVT#11415-12/04/10 3:08:47: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(527s) 12/04/10 3:11:06: EVT#11416-12/04/10 3:11:06: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(666s) 12/04/10 3:11:14: EVT#11417-12/04/10 3:11:14: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(674s) 12/04/10 3:13:30: EVT#11418-12/04/10 3:13:30: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(810s) 12/04/10 3:13:38: EVT#11419-12/04/10 3:13:38: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(818s) 12/04/10 3:16:10: EVT#11420-12/04/10 3:16:10: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(970s) 12/04/10 3:16:42: EVT#11421-12/04/10 3:16:42: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1002s) 12/04/10 3:18:38: EVT#11422-12/04/10 3:18:38: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1118s) 12/04/10 3:18:38: EVT#11423-12/04/10 3:18:38: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1118s) 12/04/10 3:18:58: EVT#11424-12/04/10 3:18:58: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1138s) 12/04/10 3:19:22: EVT#11425-12/04/10 3:19:22: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1162s) 12/04/10 3:21:58: EVT#11426-12/04/10 3:21:58: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1318s) 12/04/10 3:22:46: EVT#11427-12/04/10 3:22:46: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1366s) 12/04/10 3:25:11: EVT#11428-12/04/10 3:25:11: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1511s) 12/04/10 3:25:11: prCallback: PR completed for pd=01 12/04/10 3:26:07: EVT#11429-12/04/10 3:26:07: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1567s) 12/04/10 3:26:07: prCallback: PR completed for pd=00 12/04/10 3:37:25: EVT#11430-12/04/10 3:37:25: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2245s) 12/04/10 3:38:08: EVT#11431-12/04/10 3:38:08: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2288s) 12/04/10 3:56:57: EVT#11432-12/04/10 3:56:57: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3417s) 12/04/10 3:58:57: EVT#11433-12/04/10 3:58:57: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3537s) 12/04/10 4:17:20: EVT#11434-12/04/10 4:17:20: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4640s) 12/04/10 4:22:02: EVT#11435-12/04/10 4:22:02: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4922s) 12/04/10 4:38:47: EVT#11436-12/04/10 4:38:47: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5927s) 12/04/10 4:48:26: EVT#11437-12/04/10 4:48:26: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6506s) 12/04/10 5:01:14: EVT#11438-12/04/10 5:01:14: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7274s) 12/04/10 5:15:59: EVT#11439-12/04/10 5:15:59: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(8159s) 12/04/10 5:24:53: EVT#11440-12/04/10 5:24:53: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8693s) 12/04/10 5:45:08: EVT#11441-12/04/10 5:45:08: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9908s) 12/04/10 5:50:56: EVT#11442-12/04/10 5:50:56: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10256s) 12/04/10 6:15:39: EVT#11443-12/04/10 6:15:39: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11739s) 12/04/10 6:20:29: EVT#11444-12/04/10 6:20:29: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(12029s) 12/04/10 6:49:52: EVT#11445-12/04/10 6:49:52: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13792s) 12/04/10 6:55:22: EVT#11446-12/04/10 6:55:22: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14122s) 12/04/10 6:55:24: prCallback: PR completed for pd=02 12/04/10 7:28:19: EVT#11447-12/04/10 7:28:19: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(16099s) 12/04/10 7:28:21: prCallback: PR completed for pd=03 12/04/10 7:28:21: PR cycle complete 12/04/10 7:28:21: EVT#11448-12/04/10 7:28:21: 35=Patrol Read complete 12/04/10 7:28:21: Next PR scheduled to start at 12/11/10 3:00:00 12/11/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 12/11/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 12/11/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 12/11/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 12/11/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 12/11/10 3:00:00: EVT#11449-12/11/10 3:00:00: 39=Patrol Read started 12/11/10 3:00:00: EVT#11450-12/11/10 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 12/11/10 3:00:00: EVT#11451-12/11/10 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 12/11/10 3:00:00: EVT#11452-12/11/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 12/11/10 3:00:00: EVT#11453-12/11/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 12/11/10 3:02:15: EVT#11454-12/11/10 3:02:15: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(135s) 12/11/10 3:02:15: EVT#11455-12/11/10 3:02:15: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(135s) 12/11/10 3:04:24: EVT#11456-12/11/10 3:04:24: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(264s) 12/11/10 3:04:32: EVT#11457-12/11/10 3:04:32: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(272s) 12/11/10 3:07:07: EVT#11458-12/11/10 3:07:07: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(427s) 12/11/10 3:07:07: EVT#11459-12/11/10 3:07:07: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(427s) 12/11/10 3:09:19: EVT#11460-12/11/10 3:09:19: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(559s) 12/11/10 3:09:19: EVT#11461-12/11/10 3:09:19: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(559s) 12/11/10 3:11:54: EVT#11462-12/11/10 3:11:54: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(714s) 12/11/10 3:12:02: EVT#11463-12/11/10 3:12:02: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(722s) 12/11/10 3:14:02: EVT#11464-12/11/10 3:14:02: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(842s) 12/11/10 3:14:10: EVT#11465-12/11/10 3:14:10: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(850s) 12/11/10 3:16:58: EVT#11466-12/11/10 3:16:58: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1018s) 12/11/10 3:16:58: EVT#11467-12/11/10 3:16:58: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1018s) 12/11/10 3:18:38: EVT#11468-12/11/10 3:18:38: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1118s) 12/11/10 3:18:38: EVT#11469-12/11/10 3:18:38: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1118s) 12/11/10 3:19:22: EVT#11470-12/11/10 3:19:22: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1162s) 12/11/10 3:19:30: EVT#11471-12/11/10 3:19:30: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1170s) 12/11/10 3:22:38: EVT#11472-12/11/10 3:22:38: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1358s) 12/11/10 3:22:38: EVT#11473-12/11/10 3:22:38: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1358s) 12/11/10 3:25:59: EVT#11474-12/11/10 3:25:59: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1559s) 12/11/10 3:25:59: prCallback: PR completed for pd=00 12/11/10 3:25:59: EVT#11475-12/11/10 3:25:59: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1559s) 12/11/10 3:25:59: prCallback: PR completed for pd=01 12/11/10 3:37:32: EVT#11476-12/11/10 3:37:32: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2252s) 12/11/10 3:38:06: EVT#11477-12/11/10 3:38:06: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2286s) 12/11/10 3:57:05: EVT#11478-12/11/10 3:57:05: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3425s) 12/11/10 3:58:52: EVT#11479-12/11/10 3:58:52: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3532s) 12/11/10 4:17:28: EVT#11480-12/11/10 4:17:28: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4648s) 12/11/10 4:22:13: EVT#11481-12/11/10 4:22:13: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4933s) 12/11/10 4:38:46: EVT#11482-12/11/10 4:38:46: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5926s) 12/11/10 4:42:16: EVT#11483-12/11/10 4:42:16: 113=Unexpected sense: PD 03(e0x20/s3), CDB: 2f 00 37 a3 d0 00 00 10 00 00, Sense: f0 00 03 37 a3 de 90 0a 00 00 00 00 11 00 00 00 0 12/11/10 4:42:16: DEV_REC:Medium Error DevId[3] Tgt 3 retires=0 12/11/10 4:42:16: ErrLBAOffset (e90) LBA(37a3d000) BadLba=37a3de90 12/11/10 4:42:16: prCallback: Medium Error on pd=03, StartLba=37a3d000, ErrLba=37a3de90 12/11/10 4:42:16: prRecQueue: starting pd=03 recovery - blocking host commands 12/11/10 4:42:16: prRecGo: Ready to attempt recovery errLBA=37a3de90 on pd=03 12/11/10 4:42:16: prRecGo: dataErr found on ld=1, span=0, physArm=1, logArm=0, row=6f47bd, strip=6f47bd, startRef=0,type=10 12/11/10 4:42:16: prRecGo: data NOT valid in cache 12/11/10 4:42:16: prRecCallback: READ from mirror arm successful; send WV to pd=03 12/11/10 4:42:16: prRecCallback: WV has successfully completed on pd=03 12/11/10 4:42:16: EVT#11484-12/11/10 4:42:16: 93=Patrol Read corrected medium error on PD 03(e0x20/s3) at 37a3de90 12/11/10 4:48:10: EVT#11485-12/11/10 4:48:10: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6490s) 12/11/10 5:01:20: EVT#11486-12/11/10 5:01:20: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7280s) 12/11/10 5:15:30: EVT#11487-12/11/10 5:15:30: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(8130s) 12/11/10 5:24:52: EVT#11488-12/11/10 5:24:52: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8692s) 12/11/10 5:44:26: EVT#11489-12/11/10 5:44:26: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9866s) 12/11/10 5:51:01: EVT#11490-12/11/10 5:51:01: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10261s) 12/11/10 6:14:40: EVT#11491-12/11/10 6:14:40: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11680s) 12/11/10 6:20:27: EVT#11492-12/11/10 6:20:27: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(12027s) 12/11/10 6:48:31: EVT#11493-12/11/10 6:48:31: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13711s) 12/11/10 6:55:16: EVT#11494-12/11/10 6:55:16: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14116s) 12/11/10 6:55:18: prCallback: PR completed for pd=02 12/11/10 7:26:49: EVT#11495-12/11/10 7:26:49: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(16009s) 12/11/10 7:26:51: prCallback: PR completed for pd=03 12/11/10 7:26:51: PR cycle complete 12/11/10 7:26:51: EVT#11496-12/11/10 7:26:51: 35=Patrol Read complete 12/11/10 7:26:51: Next PR scheduled to start at 12/18/10 3:00:00 12/18/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 12/18/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 12/18/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 12/18/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 12/18/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 12/18/10 3:00:00: EVT#11497-12/18/10 3:00:00: 39=Patrol Read started 12/18/10 3:00:00: EVT#11498-12/18/10 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 12/18/10 3:00:00: EVT#11499-12/18/10 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 12/18/10 3:00:00: EVT#11500-12/18/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 12/18/10 3:00:00: EVT#11501-12/18/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 12/18/10 3:02:15: EVT#11502-12/18/10 3:02:15: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(135s) 12/18/10 3:02:15: EVT#11503-12/18/10 3:02:15: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(135s) 12/18/10 3:04:16: EVT#11504-12/18/10 3:04:16: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(256s) 12/18/10 3:04:16: EVT#11505-12/18/10 3:04:16: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(256s) 12/18/10 3:06:42: EVT#11506-12/18/10 3:06:42: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(402s) 12/18/10 3:06:51: EVT#11507-12/18/10 3:06:51: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(411s) 12/18/10 3:08:47: EVT#11508-12/18/10 3:08:47: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(527s) 12/18/10 3:08:55: EVT#11509-12/18/10 3:08:55: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(535s) 12/18/10 3:11:06: EVT#11510-12/18/10 3:11:06: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(666s) 12/18/10 3:11:30: EVT#11511-12/18/10 3:11:30: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(690s) 12/18/10 3:13:30: EVT#11512-12/18/10 3:13:30: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(810s) 12/18/10 3:13:54: EVT#11513-12/18/10 3:13:54: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(834s) 12/18/10 3:16:10: EVT#11514-12/18/10 3:16:10: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(970s) 12/18/10 3:16:43: EVT#11515-12/18/10 3:16:43: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1003s) 12/18/10 3:18:35: EVT#11516-12/18/10 3:18:35: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1115s) 12/18/10 3:18:35: EVT#11517-12/18/10 3:18:35: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1115s) 12/18/10 3:18:58: EVT#11518-12/18/10 3:18:58: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1138s) 12/18/10 3:19:14: EVT#11519-12/18/10 3:19:14: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1154s) 12/18/10 3:22:06: EVT#11520-12/18/10 3:22:06: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1326s) 12/18/10 3:22:22: EVT#11521-12/18/10 3:22:22: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1342s) 12/18/10 3:25:19: EVT#11522-12/18/10 3:25:19: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1519s) 12/18/10 3:25:19: prCallback: PR completed for pd=00 12/18/10 3:25:51: EVT#11523-12/18/10 3:25:51: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1551s) 12/18/10 3:25:51: prCallback: PR completed for pd=01 12/18/10 3:37:20: EVT#11524-12/18/10 3:37:20: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2240s) 12/18/10 3:37:50: EVT#11525-12/18/10 3:37:50: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2270s) 12/18/10 3:56:50: EVT#11526-12/18/10 3:56:50: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3410s) 12/18/10 3:58:32: EVT#11527-12/18/10 3:58:32: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3512s) 12/18/10 4:17:09: EVT#11528-12/18/10 4:17:09: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4629s) 12/18/10 4:20:56: EVT#11529-12/18/10 4:20:56: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4856s) 12/18/10 4:38:33: EVT#11530-12/18/10 4:38:33: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5913s) 12/18/10 4:45:50: EVT#11531-12/18/10 4:45:50: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6350s) 12/18/10 5:00:48: EVT#11532-12/18/10 5:00:48: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7248s) 12/18/10 5:12:13: EVT#11533-12/18/10 5:12:13: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(7933s) 12/18/10 5:24:25: EVT#11534-12/18/10 5:24:25: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8665s) 12/18/10 5:40:37: EVT#11535-12/18/10 5:40:37: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9637s) 12/18/10 5:50:21: EVT#11536-12/18/10 5:50:21: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10221s) 12/18/10 6:10:31: EVT#11537-12/18/10 6:10:31: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11431s) 12/18/10 6:19:44: EVT#11538-12/18/10 6:19:44: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11984s) 12/18/10 6:43:38: EVT#11539-12/18/10 6:43:38: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13418s) 12/18/10 6:54:28: EVT#11540-12/18/10 6:54:28: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14068s) 12/18/10 6:54:29: prCallback: PR completed for pd=02 12/18/10 7:21:07: EVT#11541-12/18/10 7:21:07: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15667s) 12/18/10 7:21:08: prCallback: PR completed for pd=03 12/18/10 7:21:08: PR cycle complete 12/18/10 7:21:08: EVT#11542-12/18/10 7:21:08: 35=Patrol Read complete 12/18/10 7:21:08: Next PR scheduled to start at 12/25/10 3:00:00 12/25/10 3:00:00: prDiskStart: starting Patrol Read on PD=00 12/25/10 3:00:00: prDiskStart: starting Patrol Read on PD=01 12/25/10 3:00:00: prDiskStart: starting Patrol Read on PD=02 12/25/10 3:00:00: prDiskStart: starting Patrol Read on PD=03 12/25/10 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 12/25/10 3:00:00: EVT#11543-12/25/10 3:00:00: 39=Patrol Read started 12/25/10 3:00:00: EVT#11544-12/25/10 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 12/25/10 3:00:00: EVT#11545-12/25/10 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 12/25/10 3:00:00: EVT#11546-12/25/10 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 12/25/10 3:00:00: EVT#11547-12/25/10 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 12/25/10 3:02:07: EVT#11548-12/25/10 3:02:07: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(127s) 12/25/10 3:02:07: EVT#11549-12/25/10 3:02:07: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(127s) 12/25/10 3:04:00: EVT#11550-12/25/10 3:04:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(240s) 12/25/10 3:04:00: EVT#11551-12/25/10 3:04:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(240s) 12/25/10 3:06:18: EVT#11552-12/25/10 3:06:18: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(378s) 12/25/10 3:06:18: EVT#11553-12/25/10 3:06:18: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(378s) 12/25/10 3:08:15: EVT#11554-12/25/10 3:08:15: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(495s) 12/25/10 3:08:15: EVT#11555-12/25/10 3:08:15: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(495s) 12/25/10 3:10:34: EVT#11556-12/25/10 3:10:34: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(634s) 12/25/10 3:10:42: EVT#11557-12/25/10 3:10:42: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(642s) 12/25/10 3:12:50: EVT#11558-12/25/10 3:12:50: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(770s) 12/25/10 3:12:57: EVT#11559-12/25/10 3:12:57: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(777s) 12/25/10 3:15:30: EVT#11560-12/25/10 3:15:30: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(930s) 12/25/10 3:15:54: EVT#11561-12/25/10 3:15:54: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(954s) 12/25/10 3:18:10: EVT#11562-12/25/10 3:18:10: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1090s) 12/25/10 3:18:26: EVT#11563-12/25/10 3:18:26: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1106s) 12/25/10 3:18:34: EVT#11564-12/25/10 3:18:34: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1114s) 12/25/10 3:18:35: EVT#11565-12/25/10 3:18:35: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1115s) 12/25/10 3:21:10: EVT#11566-12/25/10 3:21:10: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1270s) 12/25/10 3:21:26: EVT#11567-12/25/10 3:21:26: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1286s) 12/25/10 3:24:15: EVT#11568-12/25/10 3:24:15: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1455s) 12/25/10 3:24:15: prCallback: PR completed for pd=01 12/25/10 3:24:30: EVT#11569-12/25/10 3:24:30: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1470s) 12/25/10 3:24:31: prCallback: PR completed for pd=00 12/25/10 3:37:28: EVT#11570-12/25/10 3:37:28: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2248s) 12/25/10 3:37:55: EVT#11571-12/25/10 3:37:55: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2275s) 12/25/10 3:56:57: EVT#11572-12/25/10 3:56:57: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3417s) 12/25/10 3:58:25: EVT#11573-12/25/10 3:58:25: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3505s) 12/25/10 4:17:16: EVT#11574-12/25/10 4:17:16: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4636s) 12/25/10 4:20:44: EVT#11575-12/25/10 4:20:44: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4844s) 12/25/10 4:38:31: EVT#11576-12/25/10 4:38:31: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5911s) 12/25/10 4:45:25: EVT#11577-12/25/10 4:45:25: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6325s) 12/25/10 5:00:54: EVT#11578-12/25/10 5:00:54: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7254s) 12/25/10 5:11:34: EVT#11579-12/25/10 5:11:34: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(7894s) 12/25/10 5:24:24: EVT#11580-12/25/10 5:24:24: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8664s) 12/25/10 5:39:27: EVT#11581-12/25/10 5:39:27: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9567s) 12/25/10 5:50:18: EVT#11582-12/25/10 5:50:18: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10218s) 12/25/10 6:08:44: EVT#11583-12/25/10 6:08:44: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11324s) 12/25/10 6:19:41: EVT#11584-12/25/10 6:19:41: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11981s) 12/25/10 6:41:44: EVT#11585-12/25/10 6:41:44: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13304s) 12/25/10 6:54:24: EVT#11586-12/25/10 6:54:24: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14064s) 12/25/10 6:54:26: prCallback: PR completed for pd=02 12/25/10 7:19:04: EVT#11587-12/25/10 7:19:04: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15544s) 12/25/10 7:19:05: prCallback: PR completed for pd=03 12/25/10 7:19:05: PR cycle complete 12/25/10 7:19:05: EVT#11588-12/25/10 7:19:05: 35=Patrol Read complete 12/25/10 7:19:05: Next PR scheduled to start at 01/01/11 3:00:00 12/29/10 17:47:23: EVT#11589-12/29/10 17:47:23: 157=Battery relearn will start in 4 days 12/31/10 17:47:58: EVT#11590-12/31/10 17:47:58: 158=Battery relearn will start in 2 day 01/01/11 3:00:00: prDiskStart: starting Patrol Read on PD=00 01/01/11 3:00:00: prDiskStart: starting Patrol Read on PD=01 01/01/11 3:00:00: prDiskStart: starting Patrol Read on PD=02 01/01/11 3:00:00: prDiskStart: starting Patrol Read on PD=03 01/01/11 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 01/01/11 3:00:00: EVT#11591-01/01/11 3:00:00: 39=Patrol Read started 01/01/11 3:00:00: EVT#11592-01/01/11 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 01/01/11 3:00:00: EVT#11593-01/01/11 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 01/01/11 3:00:00: EVT#11594-01/01/11 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 01/01/11 3:00:00: EVT#11595-01/01/11 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 01/01/11 3:02:23: EVT#11596-01/01/11 3:02:23: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(143s) 01/01/11 3:02:23: EVT#11597-01/01/11 3:02:23: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(143s) 01/01/11 3:04:24: EVT#11598-01/01/11 3:04:24: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(264s) 01/01/11 3:04:24: EVT#11599-01/01/11 3:04:24: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(264s) 01/01/11 3:06:43: EVT#11600-01/01/11 3:06:42: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(402s) 01/01/11 3:06:43: EVT#11601-01/01/11 3:06:43: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(403s) 01/01/11 3:08:55: EVT#11602-01/01/11 3:08:55: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(535s) 01/01/11 3:09:03: EVT#11603-01/01/11 3:09:03: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(543s) 01/01/11 3:11:14: EVT#11604-01/01/11 3:11:14: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(674s) 01/01/11 3:11:22: EVT#11605-01/01/11 3:11:22: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(682s) 01/01/11 3:13:54: EVT#11606-01/01/11 3:13:54: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(834s) 01/01/11 3:13:54: EVT#11607-01/01/11 3:13:54: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(834s) 01/01/11 3:16:18: EVT#11608-01/01/11 3:16:18: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(978s) 01/01/11 3:16:27: EVT#11609-01/01/11 3:16:27: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(987s) 01/01/11 3:18:35: EVT#11610-01/01/11 3:18:35: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1115s) 01/01/11 3:18:37: EVT#11611-01/01/11 3:18:37: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1117s) 01/01/11 3:19:06: EVT#11612-01/01/11 3:19:06: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1146s) 01/01/11 3:19:14: EVT#11613-01/01/11 3:19:14: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1154s) 01/01/11 3:22:22: EVT#11614-01/01/11 3:22:22: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1342s) 01/01/11 3:22:22: EVT#11615-01/01/11 3:22:22: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1342s) 01/01/11 3:25:35: EVT#11616-01/01/11 3:25:35: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1535s) 01/01/11 3:25:35: prCallback: PR completed for pd=01 01/01/11 3:25:43: EVT#11617-01/01/11 3:25:43: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1543s) 01/01/11 3:25:43: prCallback: PR completed for pd=00 01/01/11 3:37:22: EVT#11618-01/01/11 3:37:22: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2242s) 01/01/11 3:37:50: EVT#11619-01/01/11 3:37:50: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2270s) 01/01/11 3:56:52: EVT#11620-01/01/11 3:56:52: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3412s) 01/01/11 3:58:23: EVT#11621-01/01/11 3:58:23: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3503s) 01/01/11 4:17:12: EVT#11622-01/01/11 4:17:12: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4632s) 01/01/11 4:20:53: EVT#11623-01/01/11 4:20:53: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4853s) 01/01/11 4:38:36: EVT#11624-01/01/11 4:38:36: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5916s) 01/01/11 4:45:47: EVT#11625-01/01/11 4:45:47: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6347s) 01/01/11 5:00:53: EVT#11626-01/01/11 5:00:53: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7253s) 01/01/11 5:12:04: EVT#11627-01/01/11 5:12:04: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(7924s) 01/01/11 5:24:31: EVT#11628-01/01/11 5:24:31: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8671s) 01/01/11 5:39:50: EVT#11629-01/01/11 5:39:50: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9590s) 01/01/11 5:50:26: EVT#11630-01/01/11 5:50:26: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10226s) 01/01/11 6:09:13: EVT#11631-01/01/11 6:09:13: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11353s) 01/01/11 6:19:51: EVT#11632-01/01/11 6:19:51: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11991s) 01/01/11 6:41:59: EVT#11633-01/01/11 6:41:59: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13319s) 01/01/11 6:54:35: EVT#11634-01/01/11 6:54:35: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14075s) 01/01/11 6:54:37: prCallback: PR completed for pd=02 01/01/11 7:19:19: EVT#11635-01/01/11 7:19:19: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15559s) 01/01/11 7:19:21: prCallback: PR completed for pd=03 01/01/11 7:19:21: PR cycle complete 01/01/11 7:19:21: EVT#11636-01/01/11 7:19:21: 35=Patrol Read complete 01/01/11 7:19:21: Next PR scheduled to start at 01/08/11 3:00:00 01/01/11 17:47:43: EVT#11637-01/01/11 17:47:43: 159=Battery relearn will start in 1 day 01/02/11 8:11:35: PatrolReadTimer: Clearing PR completion bitmaps; next clear scheduled for 01/02/11 8:11:35 01/02/11 12:47:23: EVT#11638-01/02/11 12:47:23: 160=Battery relearn will start in 5 hours 01/02/11 17:48:33: EVT#11639-01/02/11 17:48:33: 155=Battery relearn pending: Battery is under charge 01/02/11 17:56:08: Battery fully charged: Starting a Learn cycle 01/02/11 17:56:08: EVT#11640-01/02/11 17:56:08: 151=Battery relearn started 01/02/11 17:57:13: EVT#11641-01/02/11 17:57:13: 148=Battery is discharging 01/02/11 17:57:13: EVT#11642-01/02/11 17:57:13: 152=Battery relearn in progress 01/02/11 18:36:58: EVT#11643-01/02/11 18:36:58: 162=Current capacity of the battery is below threshold 01/02/11 18:36:58: EVT#11644-01/02/11 18:36:58: 195=BBU disabled; changing WB virtual disks to WT 01/02/11 18:36:58: EVT#11645-01/02/11 18:36:58: 54=Policy change on VD 00/0 to [ID=00,dcp=6d,ccp=6c,ap=0,dc=1,dbgi=0] from [ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] 01/02/11 18:36:58: EVT#11646-01/02/11 18:36:58: 54=Policy change on VD 01/1 to [ID=01,dcp=6d,ccp=6c,ap=0,dc=1,dbgi=0] from [ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] 01/02/11 18:51:58: EVT#11647-01/02/11 18:51:58: 153=Battery relearn completed 01/02/11 18:51:58: Learn completed successfully 01/02/11 18:51:58: Next Learn will start on 04 02 2011 01/02/11 18:51:58: *** BATTERY FEATURE PROPERTIES *** 01/02/11 18:51:58: _________________________________________________ 01/02/11 18:51:58: Auto Learn Period : 90 days 01/02/11 18:51:58: Next Learn Time : 355085518 01/02/11 18:51:58: Battery ID : 383d0718 01/02/11 18:51:58: Delayed Learn Interval: 0 hours from scheduled time 01/02/11 18:51:58: Next Learn cheduled on: 04 02 2011 01/02/11 18:51:58: _________________________________________________ 01/02/11 18:52:13: EVT#11648-01/02/11 18:52:13: 147=Battery started charging 01/02/11 18:52:13: EVT#11649-01/02/11 18:52:13: 162=Current capacity of the battery is below threshold 01/02/11 19:49:38: EVT#11650-01/02/11 19:49:38: 163=Current capacity of the battery is above threshold 01/02/11 19:49:38: EVT#11651-01/02/11 19:49:38: 194=BBU enabled; changing WT virtual disks to WB 01/02/11 19:49:38: EVT#11652-01/02/11 19:49:38: 54=Policy change on VD 00/0 to [ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] from [ID=00,dcp=6d,ccp=6c,ap=0,dc=1,dbgi=0] 01/02/11 19:49:38: EVT#11653-01/02/11 19:49:38: 54=Policy change on VD 01/1 to [ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] from [ID=01,dcp=6d,ccp=6c,ap=0,dc=1,dbgi=0] 01/02/11 21:30:23: EVT#11654-01/02/11 21:30:23: 242=Battery charge complete 01/03/11 10:10:27: shutdownBlockDone: wait for all IO to complete 01/03/11 10:10:27: shutdownBlockDone: IO complete; wait for host command 01/03/11 10:10:27: EVT#11655-01/03/11 10:10:27: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11656-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11657-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11658-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 97 % T3: Absolute State of Charge : 40 % T3: Remaining Capacity : 757 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 27 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 3988 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 757 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 97 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11659-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11660-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11661-T21: 91=Inserted: Encl PD 20 T21: EVT#11662-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11663-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11664-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11665-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11666-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11667-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11668-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11669-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11670-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11671-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11672-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T33: EVT#11673-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#11674-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=01/03 10:10:27 + rtc=33 to set timestamp 01/03/11 10:11:43: EVT#11675-01/03/11 10:11:43: 44=Time established as 01/03/11 10:11:43; (34 seconds since power on) 01/03/11 10:12:17: EVT#11676-01/03/11 10:12:17: 149=Battery temperature is normal 01/03/11 10:12:17: EVT#11677-01/03/11 10:12:17: 163=Current capacity of the battery is above threshold 01/03/11 10:12:22: MfiCmdInitQueue: FW now OPERATIONAL 01/03/11 10:12:22: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 01/03/11 10:12:22: q.responseQueueEntries=3f1, responseQueueStatr=cfa63000 01/03/11 10:12:22: q.producerIndexPtr=cfb04000, q.consumerIndexPtr=cfb05000 01/03/11 10:12:22: producerIndex=0 T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11678-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11679-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11680-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 97 % T3: Absolute State of Charge : 40 % T3: Remaining Capacity : 756 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 27 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 3998 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 756 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 97 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11681-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11682-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11683-T21: 91=Inserted: Encl PD 20 T21: EVT#11684-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11685-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11686-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11687-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11688-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11689-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11690-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11691-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11692-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11693-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11694-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T33: EVT#11695-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#11696-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=01/03 10:25:39 + rtc=33 to set timestamp 01/03/11 10:26:17: EVT#11697-01/03/11 10:26:17: 44=Time established as 01/03/11 10:26:17; (34 seconds since power on) 01/03/11 10:26:22: LOAD section: src=fe19a357, size=1a69, dst=0, mode=1...done 01/03/11 10:26:22: LOAD section: src=fe160060, size=30fea, dst=a0200000, mode=1...done 01/03/11 10:26:22: LOAD section: src=fe191053, size=92fb, dst=a027bfc0, mode=1...done 01/03/11 10:26:22: CTLR version 1.11.52-0396 Date Feb 1 2008 Time 19:36:17 01/03/11 10:26:22: Vendor Id: 60 SubVId: 1f0c DevId: 1000 SubDevId: 1028 01/03/11 10:26:51: EVT#11698-01/03/11 10:26:51: 149=Battery temperature is normal 01/03/11 10:26:51: EVT#11699-01/03/11 10:26:51: 163=Current capacity of the battery is above threshold 01/03/11 10:27:17: EVT#11700-01/03/11 10:27:17: 73=VD 00/0 Properties updated to [ID=00,dcp=0c,ccp=6d,ap=0,dc=1,dbgi=0] (from [ID=00,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0]) 01/03/11 10:27:39: EVT#11701-01/03/11 10:27:39: 73=VD 01/1 Properties updated to [ID=01,dcp=0c,ccp=6d,ap=0,dc=1,dbgi=0] (from [ID=01,dcp=6d,ccp=6d,ap=0,dc=1,dbgi=0]) 01/03/11 10:28:11: In SASPreBT here the _exitingApp = true T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11702-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11703-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11704-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 97 % T3: Absolute State of Charge : 40 % T3: Remaining Capacity : 755 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65 Min T3: Average Time to Empty : 647 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 27 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 3867 V T3: Current : -685 mA GasGaugeStat : c0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 755 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 97 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11705-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11706-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11707-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#11708-T22: 91=Inserted: Encl PD 20 T22: EVT#11709-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#11710-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#11711-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#11712-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#11713-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#11714-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#11715-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#11716-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#11717-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#11718-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#11719-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T34: EVT#11720-T34: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T34: EVT#11721-T34: 249=VD 01/1 is now OPTIMAL T34: Memory End affffff0 T34: Total memory available for disk cache: e6efbf0 T34: Total Number of Cache Lines 3648 T34: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T34: Cache initialization complete...Config info T34: ARs configured: 2 T34: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T34: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T34: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0c,ccp=0c,ap=0,dc=1,dbgi=0] T34: span 0: sBlk=00000000, nBlk=11040000, ar=0 T34: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0c,ccp=0c,ap=0,dc=1,dbgi=0] T34: span 0: sBlk=00000000, nBlk=74600000, ar=1 T34: Contiguous Triplet Usage: SS[64K]=0 T34: pdFailHistInit: count=0 T34: pdFailHistInit: count=0 T34: Initializing write journal entries T34: NOT Flushing Cache T34: RMW: NVRAM structure valid - checking for active RMWs T34: DDF_TimestampGet: using nvram time=01/03 10:28:50 + rtc=34 to set timestamp 01/03/11 10:29:41: EVT#11722-01/03/11 10:29:41: 44=Time established as 01/03/11 10:29:41; (35 seconds since power on) 01/03/11 10:30:14: EVT#11723-01/03/11 10:30:14: 149=Battery temperature is normal 01/03/11 10:30:14: EVT#11724-01/03/11 10:30:14: 147=Battery started charging 01/03/11 10:30:14: EVT#11725-01/03/11 10:30:14: 163=Current capacity of the battery is above threshold 01/03/11 10:30:18: MfiCmdInitQueue: FW now OPERATIONAL 01/03/11 10:30:18: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 01/03/11 10:30:18: q.responseQueueEntries=3f1, responseQueueStatr=cfa63000 01/03/11 10:30:18: q.producerIndexPtr=cfb04000, q.consumerIndexPtr=cfb05000 01/03/11 10:30:18: producerIndex=0 T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11726-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11727-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11728-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 41 % T3: Remaining Capacity : 775 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 1 Min T3: Cycle Count : 27 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 4064 V T3: Current : 51 mA GasGaugeStat : 80 T3: GPID : 68ffb899 ChargerStatus : 2 T3: Remaining Capacity : 775 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11729-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11730-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11731-T21: 91=Inserted: Encl PD 20 T21: EVT#11732-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11733-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11734-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11735-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11736-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11737-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11738-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11739-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11740-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11741-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11742-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T31: EVT#11743-T31: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T31: EVT#11744-T31: 249=VD 01/1 is now OPTIMAL T31: Memory End affffff0 T31: Total memory available for disk cache: e6efbf0 T31: Total Number of Cache Lines 3648 T31: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T31: Cache initialization complete...Config info T31: ARs configured: 2 T31: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T31: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T31: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=0c,ccp=0c,ap=0,dc=1,dbgi=0] T31: span 0: sBlk=00000000, nBlk=11040000, ar=0 T31: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=0c,ccp=0c,ap=0,dc=1,dbgi=0] T31: span 0: sBlk=00000000, nBlk=74600000, ar=1 T31: Contiguous Triplet Usage: SS[64K]=0 T31: pdFailHistInit: count=0 T31: pdFailHistInit: count=0 T31: Initializing write journal entries T31: NOT Flushing Cache T31: RMW: NVRAM structure valid - checking for active RMWs T31: DDF_TimestampGet: using nvram time=01/03 10:52:19 + rtc=31 to set timestamp 01/03/11 10:52:55: EVT#11745-01/03/11 10:52:55: 44=Time established as 01/03/11 10:52:55; (32 seconds since power on) 01/03/11 10:52:55: LOAD section: src=fe19a357, size=1a69, dst=0, mode=1...done 01/03/11 10:52:55: LOAD section: src=fe160060, size=30fea, dst=a0200000, mode=1...done 01/03/11 10:52:55: LOAD section: src=fe191053, size=92fb, dst=a027bfc0, mode=1...done 01/03/11 10:52:55: CTLR version 1.11.52-0396 Date Feb 1 2008 Time 19:36:17 01/03/11 10:52:55: Vendor Id: 60 SubVId: 1f0c DevId: 1000 SubDevId: 1028 01/03/11 10:53:30: EVT#11746-01/03/11 10:53:30: 73=VD 00/0 Properties updated to [ID=00,dcp=05,ccp=0c,ap=0,dc=1,dbgi=0] (from [ID=00,dcp=0c,ccp=0c,ap=0,dc=1,dbgi=0]) 01/03/11 10:53:31: EVT#11747-01/03/11 10:53:31: 149=Battery temperature is normal 01/03/11 10:53:31: EVT#11748-01/03/11 10:53:31: 163=Current capacity of the battery is above threshold 01/03/11 10:53:58: EVT#11749-01/03/11 10:53:58: 73=VD 01/1 Properties updated to [ID=01,dcp=05,ccp=0c,ap=0,dc=1,dbgi=0] (from [ID=01,dcp=0c,ccp=0c,ap=0,dc=1,dbgi=0]) 01/03/11 10:54:21: In SASPreBT here the _exitingApp = true T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11750-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11751-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11752-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 100 % T3: Absolute State of Charge : 41 % T3: Remaining Capacity : 777 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 67 Min T3: Average Time to Empty : 613 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 27 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 3911 V T3: Current : -692 mA GasGaugeStat : e0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 777 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 100 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11753-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11754-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11755-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#11756-T22: 91=Inserted: Encl PD 20 T22: EVT#11757-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#11758-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#11759-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#11760-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#11761-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#11762-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#11763-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#11764-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#11765-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#11766-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#11767-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T33: EVT#11768-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#11769-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=01/03 10:54:25 + rtc=33 to set timestamp 01/03/11 10:55:15: EVT#11770-01/03/11 10:55:15: 44=Time established as 01/03/11 10:55:15; (34 seconds since power on) 01/03/11 10:55:49: EVT#11771-01/03/11 10:55:49: 149=Battery temperature is normal 01/03/11 10:55:49: EVT#11772-01/03/11 10:55:49: 147=Battery started charging 01/03/11 10:55:49: EVT#11773-01/03/11 10:55:49: 163=Current capacity of the battery is above threshold 01/03/11 10:55:54: MfiCmdInitQueue: FW now OPERATIONAL 01/03/11 10:55:54: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 01/03/11 10:55:54: q.responseQueueEntries=3f1, responseQueueStatr=cfa63000 01/03/11 10:55:54: q.producerIndexPtr=cfb04000, q.consumerIndexPtr=cfb05000 01/03/11 10:55:54: producerIndex=0 01/03/11 10:57:59: EVT#11774-01/03/11 10:57:59: 242=Battery charge complete T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11775-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11776-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11777-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 100 % T3: Absolute State of Charge : 41 % T3: Remaining Capacity : 777 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 27 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 4037 V T3: Current : 0 mA GasGaugeStat : e0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 777 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 100 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11778-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11779-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11780-T21: 91=Inserted: Encl PD 20 T21: EVT#11781-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11782-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11783-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11784-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11785-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11786-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11787-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11788-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11789-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11790-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11791-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T32: EVT#11792-T32: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T32: EVT#11793-T32: 249=VD 01/1 is now OPTIMAL T32: Memory End affffff0 T32: Total memory available for disk cache: e6efbf0 T32: Total Number of Cache Lines 3648 T32: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T32: Cache initialization complete...Config info T32: ARs configured: 2 T32: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T32: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T32: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T32: span 0: sBlk=00000000, nBlk=11040000, ar=0 T32: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T32: span 0: sBlk=00000000, nBlk=74600000, ar=1 T32: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=01/03 11:03:36 + rtc=33 to set timestamp 01/03/11 11:04:13: EVT#11794-01/03/11 11:04:13: 44=Time established as 01/03/11 11:04:13; (34 seconds since power on) 01/03/11 11:04:47: EVT#11795-01/03/11 11:04:47: 149=Battery temperature is normal 01/03/11 11:04:47: EVT#11796-01/03/11 11:04:47: 163=Current capacity of the battery is above threshold 01/03/11 11:04:47: MfiCmdInitQueue: FW now OPERATIONAL 01/03/11 11:04:47: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 01/03/11 11:04:47: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 01/03/11 11:04:47: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 01/03/11 11:04:47: producerIndex=0 01/03/11 11:05:27: shutdownBlockDone: wait for all IO to complete 01/03/11 11:05:27: shutdownBlockDone: IO complete; wait for host command 01/03/11 11:05:27: EVT#11797-01/03/11 11:05:27: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11798-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11799-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11800-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 100 % T3: Absolute State of Charge : 41 % T3: Remaining Capacity : 777 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 27 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 4037 V T3: Current : 0 mA GasGaugeStat : e0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 777 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 100 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11801-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11802-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11803-T21: 91=Inserted: Encl PD 20 T21: EVT#11804-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11805-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11806-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11807-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11808-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11809-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11810-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11811-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11812-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11813-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11814-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T33: EVT#11815-T33: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T33: EVT#11816-T33: 249=VD 01/1 is now OPTIMAL T33: Memory End affffff0 T33: Total memory available for disk cache: e6efbf0 T33: Total Number of Cache Lines 3648 T33: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T33: Cache initialization complete...Config info T33: ARs configured: 2 T33: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T33: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T33: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T33: span 0: sBlk=00000000, nBlk=11040000, ar=0 T33: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T33: span 0: sBlk=00000000, nBlk=74600000, ar=1 T33: Contiguous Triplet Usage: SS[64K]=0 T33: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=01/03 11:05:27 + rtc=33 to set timestamp 01/03/11 11:06:07: EVT#11817-01/03/11 11:06:07: 44=Time established as 01/03/11 11:06:07; (34 seconds since power on) 01/03/11 11:06:41: EVT#11818-01/03/11 11:06:41: 149=Battery temperature is normal 01/03/11 11:06:41: EVT#11819-01/03/11 11:06:41: 163=Current capacity of the battery is above threshold 01/03/11 11:06:47: MfiCmdInitQueue: FW now OPERATIONAL 01/03/11 11:06:47: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 01/03/11 11:06:47: q.responseQueueEntries=3f1, responseQueueStatr=cfa63000 01/03/11 11:06:47: q.producerIndexPtr=cfb04000, q.consumerIndexPtr=cfb05000 01/03/11 11:06:47: producerIndex=0 01/04/11 15:11:16: EVT#11820-01/04/11 15:11:16: 147=Battery started charging 01/04/11 15:44:51: EVT#11821-01/04/11 15:44:51: 242=Battery charge complete 01/08/11 3:00:00: prDiskStart: starting Patrol Read on PD=00 01/08/11 3:00:00: prDiskStart: starting Patrol Read on PD=01 01/08/11 3:00:00: prDiskStart: starting Patrol Read on PD=02 01/08/11 3:00:00: prDiskStart: starting Patrol Read on PD=03 01/08/11 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 01/08/11 3:00:00: EVT#11822-01/08/11 3:00:00: 39=Patrol Read started 01/08/11 3:14:47: EVT#11823-01/08/11 3:14:47: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(887s) 01/08/11 3:14:53: EVT#11824-01/08/11 3:14:53: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(893s) 01/08/11 3:17:11: EVT#11825-01/08/11 3:17:11: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(1031s) 01/08/11 3:17:25: EVT#11826-01/08/11 3:17:25: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(1045s) 01/08/11 3:19:37: EVT#11827-01/08/11 3:19:37: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(1177s) 01/08/11 3:19:43: EVT#11828-01/08/11 3:19:43: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(1183s) 01/08/11 3:19:49: EVT#11829-01/08/11 3:19:49: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1189s) 01/08/11 3:20:31: EVT#11830-01/08/11 3:20:31: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1231s) 01/08/11 3:21:42: EVT#11831-01/08/11 3:21:42: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(1302s) 01/08/11 3:21:56: EVT#11832-01/08/11 3:21:56: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(1316s) 01/08/11 3:24:33: EVT#11833-01/08/11 3:24:33: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(1473s) 01/08/11 3:24:39: EVT#11834-01/08/11 3:24:39: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(1479s) 01/08/11 3:27:13: EVT#11835-01/08/11 3:27:13: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(1633s) 01/08/11 3:27:26: EVT#11836-01/08/11 3:27:26: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(1646s) 01/08/11 3:29:53: EVT#11837-01/08/11 3:29:53: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1793s) 01/08/11 3:29:59: EVT#11838-01/08/11 3:29:59: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1799s) 01/08/11 3:33:05: EVT#11839-01/08/11 3:33:05: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1985s) 01/08/11 3:33:18: EVT#11840-01/08/11 3:33:18: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1998s) 01/08/11 3:36:13: EVT#11841-01/08/11 3:36:13: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(2173s) 01/08/11 3:36:17: EVT#11842-01/08/11 3:36:17: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(2177s) 01/08/11 3:39:08: EVT#11843-01/08/11 3:39:08: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2348s) 01/08/11 3:39:25: EVT#11844-01/08/11 3:39:25: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2365s) 01/08/11 3:39:50: EVT#11845-01/08/11 3:39:50: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(2390s) 01/08/11 3:39:50: prCallback: PR completed for pd=01 01/08/11 3:39:54: EVT#11846-01/08/11 3:39:54: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(2394s) 01/08/11 3:39:54: prCallback: PR completed for pd=00 01/08/11 3:58:54: EVT#11847-01/08/11 3:58:54: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3534s) 01/08/11 3:59:37: EVT#11848-01/08/11 3:59:37: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3577s) 01/08/11 4:19:13: EVT#11849-01/08/11 4:19:13: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4753s) 01/08/11 4:21:56: EVT#11850-01/08/11 4:21:56: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4916s) 01/08/11 4:40:28: EVT#11851-01/08/11 4:40:28: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(6028s) 01/08/11 4:46:35: EVT#11852-01/08/11 4:46:35: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6395s) 01/08/11 5:02:43: EVT#11853-01/08/11 5:02:43: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7363s) 01/08/11 5:12:35: EVT#11854-01/08/11 5:12:35: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(7955s) 01/08/11 5:26:20: EVT#11855-01/08/11 5:26:20: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8780s) 01/08/11 5:40:12: EVT#11856-01/08/11 5:40:12: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9612s) 01/08/11 5:52:15: EVT#11857-01/08/11 5:52:15: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10335s) 01/08/11 6:09:42: EVT#11858-01/08/11 6:09:42: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11382s) 01/08/11 6:21:38: EVT#11859-01/08/11 6:21:38: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(12098s) 01/08/11 6:42:21: EVT#11860-01/08/11 6:42:21: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13341s) 01/08/11 6:56:20: EVT#11861-01/08/11 6:56:20: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14180s) 01/08/11 6:56:22: prCallback: PR completed for pd=02 01/08/11 7:19:39: EVT#11862-01/08/11 7:19:39: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15579s) 01/08/11 7:19:41: prCallback: PR completed for pd=03 01/08/11 7:19:41: PR cycle complete 01/08/11 7:19:41: EVT#11863-01/08/11 7:19:41: 35=Patrol Read complete 01/08/11 7:19:41: Next PR scheduled to start at 01/15/11 3:00:00 01/15/11 3:00:00: prDiskStart: starting Patrol Read on PD=00 01/15/11 3:00:00: prDiskStart: starting Patrol Read on PD=01 01/15/11 3:00:00: prDiskStart: starting Patrol Read on PD=02 01/15/11 3:00:00: prDiskStart: starting Patrol Read on PD=03 01/15/11 3:00:00: prDiskCheckOkToRun: PR cannot run on this pd=20 not a spare and online 01/15/11 3:00:00: EVT#11864-01/15/11 3:00:00: 39=Patrol Read started 01/15/11 3:00:00: EVT#11865-01/15/11 3:00:00: 94=Patrol Read progress on PD 00(e0x20/s0) is 0.00%(0s) 01/15/11 3:00:00: EVT#11866-01/15/11 3:00:00: 94=Patrol Read progress on PD 01(e0x20/s1) is 0.00%(0s) 01/15/11 3:00:00: EVT#11867-01/15/11 3:00:00: 94=Patrol Read progress on PD 03(e0x20/s3) is 0.00%(0s) 01/15/11 3:00:00: EVT#11868-01/15/11 3:00:00: 94=Patrol Read progress on PD 02(e0x20/s2) is 0.00%(0s) 01/15/11 3:02:31: EVT#11869-01/15/11 3:02:31: 94=Patrol Read progress on PD 00(e0x20/s0) is 10.00%(151s) 01/15/11 3:02:39: EVT#11870-01/15/11 3:02:39: 94=Patrol Read progress on PD 01(e0x20/s1) is 10.00%(159s) 01/15/11 3:04:32: EVT#11871-01/15/11 3:04:32: 94=Patrol Read progress on PD 00(e0x20/s0) is 20.00%(272s) 01/15/11 3:04:40: EVT#11872-01/15/11 3:04:40: 94=Patrol Read progress on PD 01(e0x20/s1) is 20.00%(280s) 01/15/11 3:06:50: EVT#11873-01/15/11 3:06:50: 94=Patrol Read progress on PD 00(e0x20/s0) is 30.00%(410s) 01/15/11 3:07:06: EVT#11874-01/15/11 3:07:06: 94=Patrol Read progress on PD 01(e0x20/s1) is 30.00%(426s) 01/15/11 3:09:11: EVT#11875-01/15/11 3:09:11: 94=Patrol Read progress on PD 00(e0x20/s0) is 40.00%(551s) 01/15/11 3:09:19: EVT#11876-01/15/11 3:09:19: 94=Patrol Read progress on PD 01(e0x20/s1) is 40.00%(559s) 01/15/11 3:11:38: EVT#11877-01/15/11 3:11:38: 94=Patrol Read progress on PD 00(e0x20/s0) is 50.00%(698s) 01/15/11 3:11:54: EVT#11878-01/15/11 3:11:54: 94=Patrol Read progress on PD 01(e0x20/s1) is 50.00%(714s) 01/15/11 3:14:25: EVT#11879-01/15/11 3:14:25: 94=Patrol Read progress on PD 00(e0x20/s0) is 60.00%(865s) 01/15/11 3:14:33: EVT#11880-01/15/11 3:14:33: 94=Patrol Read progress on PD 01(e0x20/s1) is 60.00%(873s) 01/15/11 3:17:22: EVT#11881-01/15/11 3:17:22: 94=Patrol Read progress on PD 00(e0x20/s0) is 70.00%(1042s) 01/15/11 3:17:30: EVT#11882-01/15/11 3:17:30: 94=Patrol Read progress on PD 01(e0x20/s1) is 70.00%(1050s) 01/15/11 3:18:34: EVT#11883-01/15/11 3:18:34: 94=Patrol Read progress on PD 03(e0x20/s3) is 9.99%(1114s) 01/15/11 3:18:35: EVT#11884-01/15/11 3:18:35: 94=Patrol Read progress on PD 02(e0x20/s2) is 9.99%(1115s) 01/15/11 3:19:53: EVT#11885-01/15/11 3:19:53: 94=Patrol Read progress on PD 00(e0x20/s0) is 80.00%(1193s) 01/15/11 3:20:18: EVT#11886-01/15/11 3:20:18: 94=Patrol Read progress on PD 01(e0x20/s1) is 80.00%(1218s) 01/15/11 3:23:25: EVT#11887-01/15/11 3:23:25: 94=Patrol Read progress on PD 00(e0x20/s0) is 90.00%(1405s) 01/15/11 3:23:41: EVT#11888-01/15/11 3:23:41: 94=Patrol Read progress on PD 01(e0x20/s1) is 90.00%(1421s) 01/15/11 3:26:46: EVT#11889-01/15/11 3:26:46: 94=Patrol Read progress on PD 00(e0x20/s0) is 100.00%(1606s) 01/15/11 3:26:46: prCallback: PR completed for pd=00 01/15/11 3:27:26: EVT#11890-01/15/11 3:27:26: 94=Patrol Read progress on PD 01(e0x20/s1) is 100.00%(1646s) 01/15/11 3:27:26: prCallback: PR completed for pd=01 01/15/11 3:37:28: EVT#11891-01/15/11 3:37:28: 94=Patrol Read progress on PD 02(e0x20/s2) is 20.00%(2248s) 01/15/11 3:37:54: EVT#11892-01/15/11 3:37:54: 94=Patrol Read progress on PD 03(e0x20/s3) is 20.00%(2274s) 01/15/11 3:56:56: EVT#11893-01/15/11 3:56:56: 94=Patrol Read progress on PD 02(e0x20/s2) is 29.99%(3416s) 01/15/11 3:58:20: EVT#11894-01/15/11 3:58:20: 94=Patrol Read progress on PD 03(e0x20/s3) is 29.99%(3500s) 01/15/11 4:17:15: EVT#11895-01/15/11 4:17:15: 94=Patrol Read progress on PD 02(e0x20/s2) is 39.99%(4635s) 01/15/11 4:20:30: EVT#11896-01/15/11 4:20:30: 94=Patrol Read progress on PD 03(e0x20/s3) is 39.99%(4830s) 01/15/11 4:38:29: EVT#11897-01/15/11 4:38:29: 94=Patrol Read progress on PD 02(e0x20/s2) is 49.99%(5909s) 01/15/11 4:45:02: EVT#11898-01/15/11 4:45:02: 94=Patrol Read progress on PD 03(e0x20/s3) is 49.99%(6302s) 01/15/11 5:00:39: EVT#11899-01/15/11 5:00:39: 94=Patrol Read progress on PD 02(e0x20/s2) is 59.99%(7239s) 01/15/11 5:10:52: EVT#11900-01/15/11 5:10:52: 94=Patrol Read progress on PD 03(e0x20/s3) is 59.99%(7852s) 01/15/11 5:24:16: EVT#11901-01/15/11 5:24:16: 94=Patrol Read progress on PD 02(e0x20/s2) is 69.99%(8656s) 01/15/11 5:38:12: EVT#11902-01/15/11 5:38:12: 94=Patrol Read progress on PD 03(e0x20/s3) is 69.99%(9492s) 01/15/11 5:50:06: EVT#11903-01/15/11 5:50:06: 94=Patrol Read progress on PD 02(e0x20/s2) is 79.99%(10206s) 01/15/11 6:07:22: EVT#11904-01/15/11 6:07:22: 94=Patrol Read progress on PD 03(e0x20/s3) is 79.99%(11242s) 01/15/11 6:19:22: EVT#11905-01/15/11 6:19:22: 94=Patrol Read progress on PD 02(e0x20/s2) is 89.99%(11962s) 01/15/11 6:39:48: EVT#11906-01/15/11 6:39:48: 94=Patrol Read progress on PD 03(e0x20/s3) is 89.99%(13188s) 01/15/11 6:54:01: EVT#11907-01/15/11 6:54:01: 94=Patrol Read progress on PD 02(e0x20/s2) is 99.99%(14041s) 01/15/11 6:54:02: prCallback: PR completed for pd=02 01/15/11 7:16:58: EVT#11908-01/15/11 7:16:58: 94=Patrol Read progress on PD 03(e0x20/s3) is 99.99%(15418s) 01/15/11 7:17:00: prCallback: PR completed for pd=03 01/15/11 7:17:00: PR cycle complete 01/15/11 7:17:00: EVT#11909-01/15/11 7:17:00: 35=Patrol Read complete 01/15/11 7:17:00: Next PR scheduled to start at 01/22/11 3:00:00 T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11910-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11911-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11912-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 95 % T3: Absolute State of Charge : 39 % T3: Remaining Capacity : 742 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 28 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 21 C Voltage : 3998 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 742 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 95 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11913-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11914-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11915-T21: 91=Inserted: Encl PD 20 T21: EVT#11916-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11917-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11918-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11919-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11920-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11921-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11922-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11923-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11924-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11925-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11926-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T31: EVT#11927-T31: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T31: EVT#11928-T31: 249=VD 01/1 is now OPTIMAL T31: Memory End affffff0 T31: Total memory available for disk cache: e6efbf0 T31: Total Number of Cache Lines 3648 T31: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T31: Cache initialization complete...Config info T31: ARs configured: 2 T31: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T31: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T31: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T31: span 0: sBlk=00000000, nBlk=11040000, ar=0 T31: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T31: span 0: sBlk=00000000, nBlk=74600000, ar=1 T31: Contiguous Triplet Usage: SS[64K]=0 T31: pdFailHistInit: count=0 T31: pdFailHistInit: count=0 T31: Initializing write journal entries T31: NOT Flushing Cache T31: RMW: NVRAM structure valid - checking for active RMWs T31: DDF_TimestampGet: using nvram time=01/18 12:32:17 + rtc=31 to set timestamp 01/18/11 12:33:03: EVT#11929-01/18/11 12:33:03: 44=Time established as 01/18/11 12:33:03; (32 seconds since power on) 01/18/11 12:33:39: EVT#11930-01/18/11 12:33:39: 149=Battery temperature is normal 01/18/11 12:33:39: EVT#11931-01/18/11 12:33:39: 163=Current capacity of the battery is above threshold 01/18/11 12:36:00: MfiCmdInitQueue: FW now OPERATIONAL 01/18/11 12:36:00: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 01/18/11 12:36:00: q.responseQueueEntries=3f0, responseQueueStatr=7f976000 01/18/11 12:36:00: q.producerIndexPtr=7f802000, q.consumerIndexPtr=7f803000 01/18/11 12:36:00: producerIndex=0 01/18/11 12:52:50: shutdownBlockDone: wait for all IO to complete 01/18/11 12:52:50: shutdownBlockDone: IO complete; wait for host command 01/18/11 12:52:50: EVT#11932-01/18/11 12:52:50: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11933-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11934-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11935-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 95 % T3: Absolute State of Charge : 39 % T3: Remaining Capacity : 742 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 28 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 21 C Voltage : 3998 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 742 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 95 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11936-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11937-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11938-T21: 91=Inserted: Encl PD 20 T21: EVT#11939-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11940-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11941-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#11942-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#11943-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#11944-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#11945-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#11946-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#11947-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#11948-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#11949-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T31: EVT#11950-T31: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T31: EVT#11951-T31: 249=VD 01/1 is now OPTIMAL T31: Memory End affffff0 T31: Total memory available for disk cache: e6efbf0 T31: Total Number of Cache Lines 3648 T31: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T31: Cache initialization complete...Config info T31: ARs configured: 2 T31: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T31: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T31: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T31: span 0: sBlk=00000000, nBlk=11040000, ar=0 T31: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T31: span 0: sBlk=00000000, nBlk=74600000, ar=1 T31: Contiguous Triplet Usage: SS[64K]=0 T31: pdFailHistInit: count=0 T31: pdFailHistInit: count=0 T31: Initializing write journal entries T31: NOT Flushing Cache T31: RMW: NVRAM structure valid - checking for active RMWs T31: DDF_TimestampGet: using nvram time=01/18 12:52:50 + rtc=31 to set timestamp 01/18/11 12:53:27: EVT#11952-01/18/11 12:53:27: 44=Time established as 01/18/11 12:53:27; (32 seconds since power on) 01/18/11 12:54:03: EVT#11953-01/18/11 12:54:03: 149=Battery temperature is normal 01/18/11 12:54:03: EVT#11954-01/18/11 12:54:03: 163=Current capacity of the battery is above threshold 01/18/11 12:55:39: MfiCmdInitQueue: FW now OPERATIONAL 01/18/11 12:55:39: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 01/18/11 12:55:39: q.responseQueueEntries=3f0, responseQueueStatr=cf593000 01/18/11 12:55:39: q.producerIndexPtr=cf41f000, q.consumerIndexPtr=cf420000 01/18/11 12:55:39: producerIndex=0 01/18/11 12:55:40: EVT#11955-01/18/11 12:55:40: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 01/18/11 12:55:40: EVT#11956-01/18/11 12:55:40: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 01/18/11 12:55:40: EVT#11957-01/18/11 12:55:40: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 01/18/11 12:55:40: EVT#11958-01/18/11 12:55:40: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 01/18/11 12:55:40: EVT#11959-01/18/11 12:55:40: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 01/18/11 12:55:40: EVT#11960-01/18/11 12:55:40: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11961-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11962-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11963-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 95 % T3: Absolute State of Charge : 39 % T3: Remaining Capacity : 741 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 28 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 21 C Voltage : 3988 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 741 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 95 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11964-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#11965-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#11966-T21: 91=Inserted: Encl PD 20 T21: EVT#11967-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#11968-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#11969-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#11970-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#11971-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#11972-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#11973-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#11974-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#11975-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#11976-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#11977-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T35: EVT#11978-T35: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T35: EVT#11979-T35: 249=VD 01/1 is now OPTIMAL T35: Memory End affffff0 T35: Total memory available for disk cache: e6efbf0 T35: Total Number of Cache Lines 3648 T35: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T35: Cache initialization complete...Config info T35: ARs configured: 2 T35: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T35: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T35: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T35: span 0: sBlk=00000000, nBlk=11040000, ar=0 T35: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T35: span 0: sBlk=00000000, nBlk=74600000, ar=1 T35: Contiguous Triplet Usage: SS[64K]=0 T35: pdFailHistInit: count=0 T35: pdFailHistInit: count=0 T35: Initializing write journal entries T35: NOT Flushing Cache T35: RMW: NVRAM structure valid - checking for active RMWs T35: DDF_TimestampGet: using nvram time=01/18 13:16:51 + rtc=35 to set timestamp 01/18/11 13:17:32: EVT#11980-01/18/11 13:17:32: 44=Time established as 01/18/11 13:17:32; (36 seconds since power on) 01/18/11 13:18:04: EVT#11981-01/18/11 13:18:04: 149=Battery temperature is normal 01/18/11 13:18:04: EVT#11982-01/18/11 13:18:04: 163=Current capacity of the battery is above threshold 01/18/11 13:18:56: MfiCmdInitQueue: FW now OPERATIONAL 01/18/11 13:18:56: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 01/18/11 13:18:56: q.responseQueueEntries=3f0, responseQueueStatr=33917000 01/18/11 13:18:56: q.producerIndexPtr=346ea000, q.consumerIndexPtr=354e4000 01/18/11 13:18:56: producerIndex=0 01/18/11 13:18:58: EVT#11983-01/18/11 13:18:58: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 01/18/11 13:18:58: EVT#11984-01/18/11 13:18:58: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 01/18/11 13:18:58: EVT#11985-01/18/11 13:18:58: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 01/18/11 13:18:58: EVT#11986-01/18/11 13:18:58: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 01/18/11 13:18:58: EVT#11987-01/18/11 13:18:58: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 01/18/11 13:18:58: EVT#11988-01/18/11 13:18:58: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#11989-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#11990-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#11991-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 95 % T3: Absolute State of Charge : 39 % T3: Remaining Capacity : 739 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65 Min T3: Average Time to Empty : 572 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 28 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 21 C Voltage : 3857 V T3: Current : -684 mA GasGaugeStat : c0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 739 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 95 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#11992-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T22: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T22: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T22: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T22: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T22: I2c Enclosure found on port ffffffff T22: Connect Port Done !! T22: EVT#11993-T22: 164=Enclosure (SES) discovered on PD 20(c None/p0) T22: DM_DevNotifyRAID: Notify Done. Check for Removal T22: gDevInfo=a122e260, size=140 T22: Total Device = 5 T22: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T22: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T22: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T22: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T22: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T22: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T22: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T22: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T22: DISM Complete T22: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T22: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T22: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T22: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T22: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T22: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T22: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T22: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T22: DM_DevMgr become Ready- state e T22: EVT#11994-T22: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T23: EVT#11995-T23: 91=Inserted: Encl PD 20 T23: EVT#11996-T23: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T23: EVT#11997-T23: 91=Inserted: PD 00(e0x20/s0) T23: EVT#11998-T23: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T23: EVT#11999-T23: 91=Inserted: PD 01(e0x20/s1) T23: EVT#12000-T23: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T23: EVT#12001-T23: 91=Inserted: PD 02(e0x20/s2) T23: EVT#12002-T23: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T23: EVT#12003-T23: 236=PD 02(e0x20/s2) is not a certified drive T23: EVT#12004-T23: 91=Inserted: PD 03(e0x20/s3) T23: EVT#12005-T23: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T23: EVT#12006-T23: 236=PD 03(e0x20/s3) is not a certified drive T23: Frames start at a0400000 T23: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T23: DDF_ConfigRead: reference found at pd=0, merging config T23: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T23: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T23: missingSpan =0 T23: missingSpan =0 T23: ddfInitStatus: 0 T23: configRaid: adding to raid config T23: configRaidAddSpan: adding ld=0 span=0 T23: configRaidAddSpan: adding ld=1 span=0 T36: EVT#12007-T36: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T36: EVT#12008-T36: 249=VD 01/1 is now OPTIMAL T36: Memory End affffff0 T36: Total memory available for disk cache: e6efbf0 T36: Total Number of Cache Lines 3648 T36: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T36: Cache initialization complete...Config info T36: ARs configured: 2 T36: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T36: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T36: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T36: span 0: sBlk=00000000, nBlk=11040000, ar=0 T36: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T36: span 0: sBlk=00000000, nBlk=74600000, ar=1 T36: Contiguous Triplet Usage: SS[64K]=0 T36: pdFailHistInit: count=0 T36: pdFailHistInit: count=0 T36: Initializing write journal entries T36: NOT Flushing Cache T36: RMW: NVRAM structure valid - checking for active RMWs T36: DDF_TimestampGet: using nvram time=01/18 13:25:31 + rtc=36 to set timestamp 01/18/11 13:26:17: EVT#12009-01/18/11 13:26:17: 44=Time established as 01/18/11 13:26:17; (38 seconds since power on) 01/18/11 13:26:47: EVT#12010-01/18/11 13:26:47: 149=Battery temperature is normal 01/18/11 13:26:47: EVT#12011-01/18/11 13:26:47: 147=Battery started charging 01/18/11 13:26:47: EVT#12012-01/18/11 13:26:47: 163=Current capacity of the battery is above threshold 01/18/11 13:27:47: MfiCmdInitQueue: FW now OPERATIONAL 01/18/11 13:27:47: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 01/18/11 13:27:47: q.responseQueueEntries=3f0, responseQueueStatr=33d59000 01/18/11 13:27:47: q.producerIndexPtr=36958000, q.consumerIndexPtr=35e69000 01/18/11 13:27:47: producerIndex=0 01/18/11 13:27:50: EVT#12013-01/18/11 13:27:50: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 01/18/11 13:27:50: EVT#12014-01/18/11 13:27:50: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 01/18/11 13:27:50: EVT#12015-01/18/11 13:27:50: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 01/18/11 13:27:50: EVT#12016-01/18/11 13:27:50: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 01/18/11 13:27:50: EVT#12017-01/18/11 13:27:50: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 01/18/11 13:27:50: EVT#12018-01/18/11 13:27:50: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 20 00, Sense: 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#12019-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#12020-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#12021-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 96 % T3: Absolute State of Charge : 39 % T3: Remaining Capacity : 749 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65 Min T3: Average Time to Empty : 752 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 28 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 21 C Voltage : 3878 V T3: Current : -688 mA GasGaugeStat : c0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 749 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 96 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#12022-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T22: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T22: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T22: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T22: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T22: I2c Enclosure found on port ffffffff T22: Connect Port Done !! T22: EVT#12023-T22: 164=Enclosure (SES) discovered on PD 20(c None/p0) T22: DM_DevNotifyRAID: Notify Done. Check for Removal T22: gDevInfo=a122e260, size=140 T22: Total Device = 5 T22: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T22: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T22: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T22: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T22: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T22: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T22: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T22: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T22: DISM Complete T22: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T22: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T22: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T22: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T22: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T22: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T22: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T22: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T22: DM_DevMgr become Ready- state e T22: EVT#12024-T22: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T23: EVT#12025-T23: 91=Inserted: Encl PD 20 T23: EVT#12026-T23: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T23: EVT#12027-T23: 91=Inserted: PD 00(e0x20/s0) T23: EVT#12028-T23: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T23: EVT#12029-T23: 91=Inserted: PD 01(e0x20/s1) T23: EVT#12030-T23: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T23: EVT#12031-T23: 91=Inserted: PD 02(e0x20/s2) T23: EVT#12032-T23: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T23: EVT#12033-T23: 236=PD 02(e0x20/s2) is not a certified drive T23: EVT#12034-T23: 91=Inserted: PD 03(e0x20/s3) T23: EVT#12035-T23: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T23: EVT#12036-T23: 236=PD 03(e0x20/s3) is not a certified drive T23: Frames start at a0400000 T23: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T23: DDF_ConfigRead: reference found at pd=0, merging config T23: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T23: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T23: missingSpan =0 T23: missingSpan =0 T23: ddfInitStatus: 0 T23: configRaid: adding to raid config T23: configRaidAddSpan: adding ld=0 span=0 T23: configRaidAddSpan: adding ld=1 span=0 T32: EVT#12037-T32: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T32: EVT#12038-T32: 249=VD 01/1 is now OPTIMAL T32: Memory End affffff0 T32: Total memory available for disk cache: e6efbf0 T32: Total Number of Cache Lines 3648 T32: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T32: Cache initialization complete...Config info T32: ARs configured: 2 T32: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T32: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T32: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T32: span 0: sBlk=00000000, nBlk=11040000, ar=0 T32: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T32: span 0: sBlk=00000000, nBlk=74600000, ar=1 T32: Contiguous Triplet Usage: SS[64K]=0 T32: pdFailHistInit: count=0 T32: pdFailHistInit: count=0 T32: Initializing write journal entries T32: NOT Flushing Cache T32: RMW: NVRAM structure valid - checking for active RMWs T32: DDF_TimestampGet: using nvram time=01/18 13:30:02 + rtc=32 to set timestamp 01/18/11 13:30:43: EVT#12039-01/18/11 13:30:43: 44=Time established as 01/18/11 13:30:43; (32 seconds since power on) 01/18/11 13:31:19: EVT#12040-01/18/11 13:31:19: 149=Battery temperature is normal 01/18/11 13:31:19: EVT#12041-01/18/11 13:31:19: 147=Battery started charging 01/18/11 13:31:19: EVT#12042-01/18/11 13:31:19: 163=Current capacity of the battery is above threshold 01/18/11 13:31:47: mfiIsr: idr=0000000f 01/18/11 13:31:47: mfiIdrIsr: Warning: Ignoring discardLowMFA 01/18/11 13:31:47: MfiCmdInitQueue: FW now OPERATIONAL 01/18/11 13:31:47: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 01/18/11 13:31:47: q.responseQueueEntries=3f0, responseQueueStatr=c8bc008 01/18/11 13:31:47: q.producerIndexPtr=c8bc000, q.consumerIndexPtr=c8bc004 01/18/11 13:31:47: producerIndex=0 T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#12043-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#12044-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#12045-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 98 % T3: Absolute State of Charge : 40 % T3: Remaining Capacity : 761 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 66 Min T3: Average Time to Empty : 564 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 28 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 21 C Voltage : 3895 V T3: Current : -690 mA GasGaugeStat : c0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 761 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 98 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#12046-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#12047-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#12048-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#12049-T22: 91=Inserted: Encl PD 20 T22: EVT#12050-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#12051-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#12052-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#12053-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#12054-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#12055-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#12056-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#12057-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#12058-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#12059-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#12060-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T32: EVT#12061-T32: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T32: EVT#12062-T32: 249=VD 01/1 is now OPTIMAL T32: Memory End affffff0 T32: Total memory available for disk cache: e6efbf0 T32: Total Number of Cache Lines 3648 T32: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T32: Cache initialization complete...Config info T32: ARs configured: 2 T32: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T32: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T32: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T32: span 0: sBlk=00000000, nBlk=11040000, ar=0 T32: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T32: span 0: sBlk=00000000, nBlk=74600000, ar=1 T32: Contiguous Triplet Usage: SS[64K]=0 T32: pdFailHistInit: count=0 T33: pdFailHistInit: count=0 T33: Initializing write journal entries T33: NOT Flushing Cache T33: RMW: NVRAM structure valid - checking for active RMWs T33: DDF_TimestampGet: using nvram time=01/18 13:36:18 + rtc=33 to set timestamp 01/18/11 13:37:06: EVT#12063-01/18/11 13:37:06: 44=Time established as 01/18/11 13:37:06; (34 seconds since power on) 01/18/11 13:37:36: MfiCmdInitQueue: FW now OPERATIONAL 01/18/11 13:37:36: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 01/18/11 13:37:36: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 01/18/11 13:37:36: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 01/18/11 13:37:36: producerIndex=0 01/18/11 13:37:40: EVT#12064-01/18/11 13:37:40: 149=Battery temperature is normal 01/18/11 13:37:40: EVT#12065-01/18/11 13:37:40: 147=Battery started charging 01/18/11 13:37:40: EVT#12066-01/18/11 13:37:40: 163=Current capacity of the battery is above threshold 01/18/11 13:40:22: shutdownBlockDone: wait for all IO to complete 01/18/11 13:40:22: shutdownBlockDone: IO complete; wait for host command 01/18/11 13:40:22: EVT#12067-01/18/11 13:40:22: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#12068-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#12069-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#12070-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 40 % T3: Remaining Capacity : 768 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 6 Min T3: Cycle Count : 28 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 21 C Voltage : 4048 V T3: Current : 87 mA GasGaugeStat : 80 T3: GPID : 68ffb899 ChargerStatus : 2 T3: Remaining Capacity : 768 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#12071-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#12072-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#12073-T21: 91=Inserted: Encl PD 20 T21: EVT#12074-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#12075-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#12076-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#12077-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#12078-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#12079-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#12080-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#12081-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#12082-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#12083-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#12084-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T35: EVT#12085-T35: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T35: EVT#12086-T35: 249=VD 01/1 is now OPTIMAL T35: Memory End affffff0 T35: Total memory available for disk cache: e6efbf0 T35: Total Number of Cache Lines 3648 T35: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T35: Cache initialization complete...Config info T35: ARs configured: 2 T35: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T35: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T35: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T35: span 0: sBlk=00000000, nBlk=11040000, ar=0 T35: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T35: span 0: sBlk=00000000, nBlk=74600000, ar=1 T35: Contiguous Triplet Usage: SS[64K]=0 T35: pdFailHistInit: count=0 T35: pdFailHistInit: count=0 T35: Initializing write journal entries T35: NOT Flushing Cache T35: RMW: NVRAM structure valid - checking for active RMWs T35: DDF_TimestampGet: using nvram time=01/18 13:40:22 + rtc=35 to set timestamp 01/18/11 13:41:03: EVT#12087-01/18/11 13:41:03: 44=Time established as 01/18/11 13:41:03; (36 seconds since power on) 01/18/11 13:41:35: EVT#12088-01/18/11 13:41:35: 149=Battery temperature is normal 01/18/11 13:41:35: EVT#12089-01/18/11 13:41:35: 147=Battery started charging 01/18/11 13:41:35: EVT#12090-01/18/11 13:41:35: 163=Current capacity of the battery is above threshold T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#12091-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#12092-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#12093-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 41 % T3: Remaining Capacity : 775 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 4 Min T3: Cycle Count : 28 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 21 C Voltage : 4052 V T3: Current : 72 mA GasGaugeStat : 80 T3: GPID : 68ffb899 ChargerStatus : 2 T3: Remaining Capacity : 775 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#12094-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#12095-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#12096-T21: 91=Inserted: Encl PD 20 T21: EVT#12097-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#12098-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#12099-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#12100-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#12101-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#12102-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#12103-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#12104-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#12105-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#12106-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#12107-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T36: EVT#12108-T36: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T36: EVT#12109-T36: 249=VD 01/1 is now OPTIMAL T36: Memory End affffff0 T36: Total memory available for disk cache: e6efbf0 T36: Total Number of Cache Lines 3648 T36: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T36: Cache initialization complete...Config info T36: ARs configured: 2 T36: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T36: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T36: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T36: span 0: sBlk=00000000, nBlk=11040000, ar=0 T36: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T36: span 0: sBlk=00000000, nBlk=74600000, ar=1 T36: Contiguous Triplet Usage: SS[64K]=0 T36: pdFailHistInit: count=0 T36: pdFailHistInit: count=0 T36: Initializing write journal entries T36: NOT Flushing Cache T36: RMW: NVRAM structure valid - checking for active RMWs T36: DDF_TimestampGet: using nvram time=01/18 13:45:02 + rtc=36 to set timestamp 01/18/11 13:45:43: EVT#12110-01/18/11 13:45:43: 44=Time established as 01/18/11 13:45:43; (37 seconds since power on) 01/18/11 13:46:14: EVT#12111-01/18/11 13:46:14: 149=Battery temperature is normal 01/18/11 13:46:14: EVT#12112-01/18/11 13:46:14: 147=Battery started charging 01/18/11 13:46:14: EVT#12113-01/18/11 13:46:14: 163=Current capacity of the battery is above threshold 01/18/11 13:46:56: mfiIsr: idr=0000000f 01/18/11 13:46:56: mfiIdrIsr: Warning: Ignoring discardLowMFA 01/18/11 13:46:56: MfiCmdInitQueue: FW now OPERATIONAL 01/18/11 13:46:56: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 01/18/11 13:46:56: q.responseQueueEntries=3f0, responseQueueStatr=c8bc008 01/18/11 13:46:56: q.producerIndexPtr=c8bc000, q.consumerIndexPtr=c8bc004 01/18/11 13:46:56: producerIndex=0 01/18/11 13:54:54: EVT#12114-01/18/11 13:54:54: 242=Battery charge complete T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#12115-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#12116-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#12117-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 41 % T3: Remaining Capacity : 774 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 28 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 21 C Voltage : 4047 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 774 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#12118-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#12119-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#12120-T21: 91=Inserted: Encl PD 20 T21: EVT#12121-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#12122-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#12123-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#12124-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#12125-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#12126-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#12127-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#12128-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#12129-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#12130-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#12131-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T22: EVT#12132-T22: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T22: EVT#12133-T22: 249=VD 01/1 is now OPTIMAL T22: Memory End affffff0 T22: Total memory available for disk cache: e6efbf0 T22: Total Number of Cache Lines 3648 T22: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T22: Cache initialization complete...Config info T22: ARs configured: 2 T22: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T22: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T22: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T22: span 0: sBlk=00000000, nBlk=11040000, ar=0 T22: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T22: span 0: sBlk=00000000, nBlk=74600000, ar=1 T22: Contiguous Triplet Usage: SS[64K]=0 T22: pdFailHistInit: count=0 T22: pdFailHistInit: count=0 T22: Initializing write journal entries T22: NOT Flushing Cache T22: RMW: NVRAM structure valid - checking for active RMWs T22: DDF_TimestampGet: using nvram time=01/18 14:05:29 + rtc=22 to set timestamp 01/18/11 14:05:55: EVT#12134-01/18/11 14:05:55: 44=Time established as 01/18/11 14:05:55; (23 seconds since power on) 01/18/11 14:06:29: MfiCmdInitQueue: FW now OPERATIONAL 01/18/11 14:06:29: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 01/18/11 14:06:29: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 01/18/11 14:06:29: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 01/18/11 14:06:29: producerIndex=0 01/18/11 14:06:40: EVT#12135-01/18/11 14:06:40: 149=Battery temperature is normal 01/18/11 14:06:40: EVT#12136-01/18/11 14:06:40: 163=Current capacity of the battery is above threshold 01/18/11 15:00:22: shutdownBlockDone: wait for all IO to complete 01/18/11 15:00:22: shutdownBlockDone: IO complete; wait for host command 01/18/11 15:00:22: EVT#12137-01/18/11 15:00:22: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#12138-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#12139-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#12140-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 41 % T3: Remaining Capacity : 771 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 67 Min T3: Average Time to Empty : 66 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 28 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 21 C Voltage : 3897 V T3: Current : -691 mA GasGaugeStat : c0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 771 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#12141-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: Invalid Event 10010000, pEventReply=14f6c00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T4: DM_DevMgrIsChipInit 0 State 1 T9: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T9: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 2 Link 90 T9: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T9: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T9: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T9: DM_DevMgrIsChipInit 0 State 1 T13: Discovery completed in 9 seconds T13: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T13: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T13: PageType 0 PageVersion 0 NumPhys 8 T13: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T13: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=1 DiscSts=0 T13: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T13: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=1 DiscSts=0 T13: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T13: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T13: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T13: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T13: DISM: Queued! T13: DM_DevMgrIsChipInit 0 State 400 T13: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T13: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T13: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T13: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T14: I2c Enclosure found on port ffffffff T14: Connect Port Done !! T14: EVT#12142-T14: 164=Enclosure (SES) discovered on PD 20(c None/p0) T14: DM_DevNotifyRAID: Notify Done. Check for Removal T14: gDevInfo=a122e260, size=140 T14: Total Device = 3 T14: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T14: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T14: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T14: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0b T14: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T14: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T14: DISM Complete T14: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T14: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T14: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T14: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T14: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T14: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T14: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T14: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T14: DM_DevMgr become Ready- state e T15: EVT#12143-T15: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T16: EVT#12144-T16: 91=Inserted: Encl PD 20 T16: EVT#12145-T16: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T16: EVT#12146-T16: 91=Inserted: PD 00(e0x20/s0) T16: EVT#12147-T16: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T16: EVT#12148-T16: 91=Inserted: PD 02(e0x20/s2) T16: EVT#12149-T16: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T16: EVT#12150-T16: 236=PD 02(e0x20/s2) is not a certified drive T16: Frames start at a0400000 T16: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T16: DDF_ConfigRead: reference found at pd=0, merging config T16: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T16: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T16: DDF_MergeComplete: missing drive (pde=a0dc8c20, pdeIndex=1) T16: DDF_MergeComplete: missing drive (pde=a0dc8ca0, pdeIndex=3) T16: missingSpan =0 T16: missingSpan =0 T16: ddfInitStatus: 1 T16: configRaid: adding to raid config T16: configRaidAddSpan: adding ld=0 span=0 T16: configRaidAddSpan: adding ld=1 span=0 T16: EVT#12151-T16: 257=PD missing: SasAddr=0x5000c50003bdbe01, ArrayRef=0, RowIndex=0x1, EnclPd=0x20, Slot=1. T16: EVT#12152-T16: 257=PD missing: SasAddr=0x0, ArrayRef=1, RowIndex=0x1, EnclPd=0x20, Slot=3. T16: EVT#12153-T16: 238=PDs missing from configuration at boot T32: EVT#12154-T32: 81=State change on VD 01/1 from UNKNOWN(ff) to DEGRADED(2) T32: EVT#12155-T32: 251=VD 01/1 is now DEGRADED T32: Memory End affffff0 T32: Total memory available for disk cache: e6efbf0 T32: Total Number of Cache Lines 3648 T32: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T32: Cache initialization complete...Config info T32: ARs configured: 2 T32: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) ff(20/1) T32: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) ff(20/3) T32: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=2 DT=1605 BT=2538, prop=[ID=00,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T32: span 0: sBlk=00000000, nBlk=11040000, ar=0 T32: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=2 DT=1605 BT=2538, prop=[ID=01,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T32: span 0: sBlk=00000000, nBlk=74600000, ar=1 T32: Contiguous Triplet Usage: SS[64K]=0 T32: pdFailHistInit: count=0 T32: EVT#12156-T32: 251=VD 00/0 is now DEGRADED T32: EVT#12157-T32: 251=VD 01/1 is now DEGRADED T32: pdFailHistInit: count=0 T32: Initializing write journal entries T32: NOT Flushing Cache T32: RMW: NVRAM structure valid - checking for active RMWs T32: DDF_TimestampGet: using nvram time=01/18 15:00:23 + rtc=32 to set timestamp T32: DDF_TimestampGet: using nvram time=01/18 15:00:23 + rtc=32 to set timestamp T32: DDF_TimestampGet: using nvram time=01/18 15:00:23 + rtc=32 to set timestamp T32: DDF_TimestampGet: using nvram time=01/18 15:00:23 + rtc=32 to set timestamp T33: DDF_TimestampGet: using nvram time=01/18 15:00:23 + rtc=33 to set timestamp 01/18/11 15:01:54: EVT#12158-01/18/11 15:01:54: 44=Time established as 01/18/11 15:01:54; (33 seconds since power on) 01/18/11 15:02:29: EVT#12159-01/18/11 15:02:29: 149=Battery temperature is normal 01/18/11 15:02:29: EVT#12160-01/18/11 15:02:29: 147=Battery started charging 01/18/11 15:02:29: EVT#12161-01/18/11 15:02:29: 163=Current capacity of the battery is above threshold T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T2: pciErrorInt: O_PCI_ERROR = 00004000 T2: PCI Express Link went DOWN T2: Treating DL_DOWN as a hot-reset, resetting chip... T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#12162-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#12163-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#12164-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 41 % T3: Remaining Capacity : 775 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 1 Min T3: Cycle Count : 28 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 21 C Voltage : 4059 V T3: Current : 66 mA GasGaugeStat : 80 T3: GPID : 68ffb899 ChargerStatus : 2 T3: Remaining Capacity : 775 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#12165-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: Invalid Event 10010000, pEventReply=14f6c00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T4: DM_DevMgrIsChipInit 0 State 1 T6: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T6: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 2 Link 90 T6: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T6: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T6: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T6: DM_DevMgrIsChipInit 0 State 1 T10: Discovery completed in 6 seconds T10: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T10: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T10: PageType 0 PageVersion 0 NumPhys 8 T10: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T10: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=1 DiscSts=0 T10: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T10: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=1 DiscSts=0 T10: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T10: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T10: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T10: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T10: DISM: Queued! T10: DM_DevMgrIsChipInit 0 State 400 T10: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T10: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T10: I2c Enclosure found on port ffffffff T10: Connect Port Done !! T10: EVT#12166-T10: 164=Enclosure (SES) discovered on PD 20(c None/p0) T10: DM_DevNotifyRAID: Notify Done. Check for Removal T10: gDevInfo=a122e260, size=140 T10: Total Device = 3 T10: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T10: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T10: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T10: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0b T10: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T10: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T10: DISM Complete T10: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T10: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T10: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T10: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T10: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T10: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T10: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T10: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T10: DM_DevMgr become Ready- state e T10: EVT#12167-T10: 91=Inserted: Encl PD 20 T10: EVT#12168-T10: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T10: EVT#12169-T10: 91=Inserted: PD 00(e0x20/s0) T10: EVT#12170-T10: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T10: EVT#12171-T10: 91=Inserted: PD 02(e0x20/s2) T10: EVT#12172-T10: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T10: EVT#12173-T10: 236=PD 02(e0x20/s2) is not a certified drive T10: Frames start at a0400000 T10: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T10: DDF_ConfigRead: reference found at pd=0, merging config T10: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T10: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T10: missingSpan =0 T10: missingSpan =0 T10: ddfInitStatus: 0 T10: configRaid: adding to raid config T10: configRaidAddSpan: adding ld=0 span=0 T10: configRaidAddSpan: adding ld=1 span=0 T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T2: pciErrorInt: O_PCI_ERROR = 00004000 T2: PCI Express Link went DOWN T2: Treating DL_DOWN as a hot-reset, resetting chip... T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#12174-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#12175-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#12176-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 41 % T3: Remaining Capacity : 775 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 1 Min T3: Cycle Count : 28 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 21 C Voltage : 4064 V T3: Current : 59 mA GasGaugeStat : 80 T3: GPID : 68ffb899 ChargerStatus : 2 T3: Remaining Capacity : 775 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#12177-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: Invalid Event 10010000, pEventReply=14f6c00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T4: DM_DevMgrIsChipInit 0 State 1 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T5: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 2 Link 90 T5: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T5: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T9: Discovery completed in 5 seconds T9: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T9: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T9: PageType 0 PageVersion 0 NumPhys 8 T9: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T9: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=1 DiscSts=0 T9: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T9: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=1 DiscSts=0 T9: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T9: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T9: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T9: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T9: DISM: Queued! T9: DM_DevMgrIsChipInit 0 State 400 T9: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T9: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T9: I2c Enclosure found on port ffffffff T9: Connect Port Done !! T9: EVT#12178-T9: 164=Enclosure (SES) discovered on PD 20(c None/p0) T9: DM_DevNotifyRAID: Notify Done. Check for Removal T9: gDevInfo=a122e260, size=140 T9: Total Device = 3 T9: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T9: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T9: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T9: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0b T9: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T9: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T9: DISM Complete T9: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T9: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T9: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T9: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T9: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T9: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T9: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T9: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T9: DM_DevMgr become Ready- state e T9: EVT#12179-T9: 91=Inserted: Encl PD 20 T9: EVT#12180-T9: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T9: EVT#12181-T9: 91=Inserted: PD 00(e0x20/s0) T9: EVT#12182-T9: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T9: EVT#12183-T9: 91=Inserted: PD 02(e0x20/s2) T9: EVT#12184-T9: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T9: EVT#12185-T9: 236=PD 02(e0x20/s2) is not a certified drive T9: Frames start at a0400000 T9: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T9: DDF_ConfigRead: reference found at pd=0, merging config T9: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T9: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T9: missingSpan =0 T9: missingSpan =0 T9: ddfInitStatus: 0 T9: configRaid: adding to raid config T9: configRaidAddSpan: adding ld=0 span=0 T9: configRaidAddSpan: adding ld=1 span=0 T68: EVT#12186-T68: 149=Battery temperature is normal T68: EVT#12187-T68: 147=Battery started charging T68: EVT#12188-T68: 163=Current capacity of the battery is above threshold T198: EVT#12189-T198: 242=Battery charge complete T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#12190-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#12191-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#12192-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 41 % T3: Remaining Capacity : 774 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 28 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 21 C Voltage : 4047 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 774 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#12193-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: Invalid Event 10010000, pEventReply=14f6c00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T5: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 2 Link 90 T5: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T5: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T9: Discovery completed in 5 seconds T9: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T9: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T9: PageType 0 PageVersion 0 NumPhys 8 T9: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T9: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=1 DiscSts=0 T9: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T9: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=1 DiscSts=0 T9: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T9: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T9: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T9: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T9: DISM: Queued! T9: DM_DevMgrIsChipInit 0 State 400 T9: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T9: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T9: I2c Enclosure found on port ffffffff T9: Connect Port Done !! T9: EVT#12194-T9: 164=Enclosure (SES) discovered on PD 20(c None/p0) T9: DM_DevNotifyRAID: Notify Done. Check for Removal T9: gDevInfo=a122e260, size=140 T9: Total Device = 3 T9: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T9: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T9: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T9: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0b T9: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T9: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T9: DISM Complete T9: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T9: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T9: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T9: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T9: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T9: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T9: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T9: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T9: DM_DevMgr become Ready- state e T9: EVT#12195-T9: 91=Inserted: Encl PD 20 T9: EVT#12196-T9: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T9: EVT#12197-T9: 91=Inserted: PD 00(e0x20/s0) T9: EVT#12198-T9: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T9: EVT#12199-T9: 91=Inserted: PD 02(e0x20/s2) T9: EVT#12200-T9: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T9: EVT#12201-T9: 236=PD 02(e0x20/s2) is not a certified drive T9: Frames start at a0400000 T9: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T9: DDF_ConfigRead: reference found at pd=0, merging config T9: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T9: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T9: missingSpan =0 T9: missingSpan =0 T9: ddfInitStatus: 0 T9: configRaid: adding to raid config T9: configRaidAddSpan: adding ld=0 span=0 T9: configRaidAddSpan: adding ld=1 span=0 T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#12202-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#12203-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#12204-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 99 % T3: Absolute State of Charge : 41 % T3: Remaining Capacity : 773 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 67 Min T3: Average Time to Empty : 66 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 28 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 22 C Voltage : 3916 V T3: Current : -694 mA GasGaugeStat : c0 T3: GPID : e8ffb899 ChargerStatus : 3 T3: Remaining Capacity : 773 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 99 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#12205-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 0 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 1 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 1 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#12206-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#12207-T21: 113=Unexpected sense: Encl PD 20, CDB: 12 00 00 00 00 00, Sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00 T22: EVT#12208-T22: 91=Inserted: Encl PD 20 T22: EVT#12209-T22: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T22: EVT#12210-T22: 91=Inserted: PD 00(e0x20/s0) T22: EVT#12211-T22: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T22: EVT#12212-T22: 91=Inserted: PD 01(e0x20/s1) T22: EVT#12213-T22: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T22: EVT#12214-T22: 91=Inserted: PD 02(e0x20/s2) T22: EVT#12215-T22: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T22: EVT#12216-T22: 236=PD 02(e0x20/s2) is not a certified drive T22: EVT#12217-T22: 91=Inserted: PD 03(e0x20/s3) T22: EVT#12218-T22: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T22: EVT#12219-T22: 236=PD 03(e0x20/s3) is not a certified drive T22: Frames start at a0400000 T22: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T22: DDF_ConfigRead: reference found at pd=0, merging config T22: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T22: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T22: missingSpan =0 T22: missingSpan =0 T22: ddfInitStatus: 0 T22: configRaid: adding to raid config T22: configRaidAddSpan: adding ld=0 span=0 T22: configRaidAddSpan: adding ld=1 span=0 T22: markForeignsAndAddNewPds: setting foreign DDF type on pd=1 T22: markForeignsAndAddNewPds: setting foreign DDF type on pd=3 T42: EVT#12220-T42: 81=State change on VD 01/1 from UNKNOWN(ff) to DEGRADED(2) T42: EVT#12221-T42: 251=VD 01/1 is now DEGRADED T42: Memory End affffff0 T42: Total memory available for disk cache: e6efbf0 T42: Total Number of Cache Lines 3648 T42: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T42: Cache initialization complete...Config info T42: ARs configured: 2 T42: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) ff(20/1) T42: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) ff(20/3) T42: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=2 DT=1605 BT=2538, prop=[ID=00,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T42: span 0: sBlk=00000000, nBlk=11040000, ar=0 T42: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=2 DT=1605 BT=2538, prop=[ID=01,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T42: span 0: sBlk=00000000, nBlk=74600000, ar=1 T42: Contiguous Triplet Usage: SS[64K]=0 T42: pdFailHistInit: count=0 T42: pdFailHistInit: count=0 T42: Initializing write journal entries T42: NOT Flushing Cache T42: RMW: NVRAM structure valid - checking for active RMWs T42: DDF_TimestampGet: using nvram time=01/18 15:03:54 + rtc=42 to set timestamp 01/18/11 15:26:28: EVT#12222-01/18/11 15:26:28: 44=Time established as 01/18/11 15:26:28; (43 seconds since power on) 01/18/11 15:26:53: EVT#12223-01/18/11 15:26:53: 149=Battery temperature is normal 01/18/11 15:26:53: EVT#12224-01/18/11 15:26:53: 147=Battery started charging 01/18/11 15:26:53: EVT#12225-01/18/11 15:26:53: 163=Current capacity of the battery is above threshold 01/18/11 15:27:03: MfiCmdInitQueue: FW now OPERATIONAL 01/18/11 15:27:03: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 01/18/11 15:27:03: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 01/18/11 15:27:03: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 01/18/11 15:27:03: producerIndex=0 01/18/11 15:30:08: EVT#12226-01/18/11 15:30:08: 242=Battery charge complete 01/19/11 13:23:17: EVT#12227-01/19/11 13:23:17: 218=Foreign Configuration Detected 01/19/11 13:26:55: EVT#12228-01/19/11 13:26:55: 218=Foreign Configuration Detected 01/19/11 13:28:12: EVT#12229-01/19/11 13:28:12: 218=Foreign Configuration Detected 01/19/11 13:28:12: EVT#12230-01/19/11 13:28:12: 218=Foreign Configuration Detected 01/19/11 13:30:19: EVT#12231-01/19/11 13:30:19: 218=Foreign Configuration Detected 01/19/11 13:30:20: EVT#12232-01/19/11 13:30:20: 218=Foreign Configuration Detected 01/19/11 13:30:50: EVT#12233-01/19/11 13:30:50: 218=Foreign Configuration Detected 01/19/11 13:31:59: EVT#12234-01/19/11 13:31:59: 218=Foreign Configuration Detected 01/19/11 13:40:20: EVT#12235-01/19/11 13:40:20: 218=Foreign Configuration Detected 01/19/11 13:40:20: EVT#12236-01/19/11 13:40:20: 218=Foreign Configuration Detected 01/19/11 13:40:32: EVT#12237-01/19/11 13:40:32: 218=Foreign Configuration Detected 01/19/11 13:40:33: EVT#12238-01/19/11 13:40:33: 218=Foreign Configuration Detected 01/19/11 13:40:33: EVT#12239-01/19/11 13:40:33: 218=Foreign Configuration Detected 01/19/11 13:40:33: EVT#12240-01/19/11 13:40:33: 220=Foreign Configuration Cleared 01/19/11 13:49:27: EVT#12241-01/19/11 13:49:27: 114=State change on PD 03(e0x20/s3) from UNCONFIGURED_GOOD(0) to OFFLINE(10) 01/19/11 13:49:27: EVT#12242-01/19/11 13:49:27: 232=Replaced Missing as PD 03(e0x20/s3) on array 1 row 1 01/19/11 13:50:13: EVT#12243-01/19/11 13:50:13: 105=Rebuild started on PD 03(e0x20/s3) 01/19/11 13:50:13: EVT#12244-01/19/11 13:50:13: 114=State change on PD 03(e0x20/s3) from OFFLINE(10) to REBUILD(14) 01/19/11 13:52:46: EVT#12245-01/19/11 13:52:46: 114=State change on PD 01(e0x20/s1) from UNCONFIGURED_GOOD(0) to OFFLINE(10) 01/19/11 13:52:46: EVT#12246-01/19/11 13:52:46: 232=Replaced Missing as PD 01(e0x20/s1) on array 0 row 1 01/19/11 13:53:05: EVT#12247-01/19/11 13:53:05: 105=Rebuild started on PD 01(e0x20/s1) 01/19/11 13:53:05: EVT#12248-01/19/11 13:53:05: 114=State change on PD 01(e0x20/s1) from OFFLINE(10) to REBUILD(14) 01/19/11 13:53:13: EVT#12249-01/19/11 13:53:13: 103=Rebuild progress on PD 03(e0x20/s3) is 0.99%(180s) 01/19/11 13:53:21: EVT#12250-01/19/11 13:53:21: 103=Rebuild progress on PD 01(e0x20/s1) is 1.30%(16s) 01/19/11 13:53:37: EVT#12251-01/19/11 13:53:37: 103=Rebuild progress on PD 01(e0x20/s1) is 2.73%(32s) 01/19/11 13:53:53: EVT#12252-01/19/11 13:53:53: 103=Rebuild progress on PD 01(e0x20/s1) is 4.16%(48s) 01/19/11 13:54:09: EVT#12253-01/19/11 13:54:09: 103=Rebuild progress on PD 01(e0x20/s1) is 5.59%(64s) 01/19/11 13:54:25: EVT#12254-01/19/11 13:54:25: 103=Rebuild progress on PD 01(e0x20/s1) is 7.01%(80s) 01/19/11 13:54:41: EVT#12255-01/19/11 13:54:41: 103=Rebuild progress on PD 01(e0x20/s1) is 8.44%(96s) 01/19/11 13:54:57: EVT#12256-01/19/11 13:54:57: 103=Rebuild progress on PD 01(e0x20/s1) is 9.87%(112s) 01/19/11 13:55:13: EVT#12257-01/19/11 13:55:13: 103=Rebuild progress on PD 01(e0x20/s1) is 11.29%(128s) 01/19/11 13:55:29: EVT#12258-01/19/11 13:55:29: 103=Rebuild progress on PD 01(e0x20/s1) is 12.72%(144s) 01/19/11 13:55:45: EVT#12259-01/19/11 13:55:45: 103=Rebuild progress on PD 01(e0x20/s1) is 14.12%(160s) 01/19/11 13:56:01: EVT#12260-01/19/11 13:56:01: 103=Rebuild progress on PD 01(e0x20/s1) is 15.53%(176s) 01/19/11 13:56:15: EVT#12261-01/19/11 13:56:15: 103=Rebuild progress on PD 03(e0x20/s3) is 1.99%(362s) 01/19/11 13:56:17: EVT#12262-01/19/11 13:56:17: 103=Rebuild progress on PD 01(e0x20/s1) is 16.94%(192s) 01/19/11 13:56:33: EVT#12263-01/19/11 13:56:33: 103=Rebuild progress on PD 01(e0x20/s1) is 18.36%(208s) 01/19/11 13:56:49: EVT#12264-01/19/11 13:56:49: 103=Rebuild progress on PD 01(e0x20/s1) is 19.77%(224s) 01/19/11 13:57:05: EVT#12265-01/19/11 13:57:05: 103=Rebuild progress on PD 01(e0x20/s1) is 21.18%(240s) 01/19/11 13:57:21: EVT#12266-01/19/11 13:57:21: 103=Rebuild progress on PD 01(e0x20/s1) is 22.59%(256s) 01/19/11 13:57:37: EVT#12267-01/19/11 13:57:37: 103=Rebuild progress on PD 01(e0x20/s1) is 23.99%(272s) 01/19/11 13:57:53: EVT#12268-01/19/11 13:57:53: 103=Rebuild progress on PD 01(e0x20/s1) is 25.37%(288s) 01/19/11 13:58:09: EVT#12269-01/19/11 13:58:09: 103=Rebuild progress on PD 01(e0x20/s1) is 26.75%(304s) 01/19/11 13:58:25: EVT#12270-01/19/11 13:58:25: 103=Rebuild progress on PD 01(e0x20/s1) is 28.13%(320s) 01/19/11 13:58:41: EVT#12271-01/19/11 13:58:41: 103=Rebuild progress on PD 01(e0x20/s1) is 29.52%(336s) 01/19/11 13:58:57: EVT#12272-01/19/11 13:58:57: 103=Rebuild progress on PD 01(e0x20/s1) is 30.90%(352s) 01/19/11 13:59:13: EVT#12273-01/19/11 13:59:13: 103=Rebuild progress on PD 01(e0x20/s1) is 32.28%(368s) 01/19/11 13:59:29: EVT#12274-01/19/11 13:59:29: 103=Rebuild progress on PD 01(e0x20/s1) is 33.65%(384s) 01/19/11 13:59:31: EVT#12275-01/19/11 13:59:31: 103=Rebuild progress on PD 03(e0x20/s3) is 2.99%(558s) 01/19/11 13:59:45: EVT#12276-01/19/11 13:59:45: 103=Rebuild progress on PD 01(e0x20/s1) is 35.00%(400s) 01/19/11 14:00:01: EVT#12277-01/19/11 14:00:01: 103=Rebuild progress on PD 01(e0x20/s1) is 36.36%(416s) 01/19/11 14:00:17: EVT#12278-01/19/11 14:00:17: 103=Rebuild progress on PD 01(e0x20/s1) is 37.72%(432s) 01/19/11 14:00:33: EVT#12279-01/19/11 14:00:33: 103=Rebuild progress on PD 01(e0x20/s1) is 39.08%(448s) 01/19/11 14:00:49: EVT#12280-01/19/11 14:00:49: 103=Rebuild progress on PD 01(e0x20/s1) is 40.44%(464s) 01/19/11 14:01:05: EVT#12281-01/19/11 14:01:05: 103=Rebuild progress on PD 01(e0x20/s1) is 41.79%(480s) 01/19/11 14:01:21: EVT#12282-01/19/11 14:01:21: 103=Rebuild progress on PD 01(e0x20/s1) is 43.08%(496s) 01/19/11 14:01:37: EVT#12283-01/19/11 14:01:37: 103=Rebuild progress on PD 01(e0x20/s1) is 44.37%(512s) 01/19/11 14:01:53: EVT#12284-01/19/11 14:01:53: 103=Rebuild progress on PD 01(e0x20/s1) is 45.65%(528s) 01/19/11 14:02:09: EVT#12285-01/19/11 14:02:09: 103=Rebuild progress on PD 01(e0x20/s1) is 46.94%(544s) 01/19/11 14:02:25: EVT#12286-01/19/11 14:02:25: 103=Rebuild progress on PD 01(e0x20/s1) is 48.22%(560s) 01/19/11 14:02:41: EVT#12287-01/19/11 14:02:41: 103=Rebuild progress on PD 01(e0x20/s1) is 49.52%(576s) 01/19/11 14:02:46: EVT#12288-01/19/11 14:02:46: 103=Rebuild progress on PD 03(e0x20/s3) is 3.99%(753s) 01/19/11 14:02:57: EVT#12289-01/19/11 14:02:57: 103=Rebuild progress on PD 01(e0x20/s1) is 50.78%(592s) 01/19/11 14:03:13: EVT#12290-01/19/11 14:03:13: 103=Rebuild progress on PD 01(e0x20/s1) is 51.95%(608s) 01/19/11 14:03:29: EVT#12291-01/19/11 14:03:29: 103=Rebuild progress on PD 01(e0x20/s1) is 53.21%(624s) 01/19/11 14:03:45: EVT#12292-01/19/11 14:03:45: 103=Rebuild progress on PD 01(e0x20/s1) is 54.48%(640s) 01/19/11 14:04:01: EVT#12293-01/19/11 14:04:01: 103=Rebuild progress on PD 01(e0x20/s1) is 55.74%(656s) 01/19/11 14:04:17: EVT#12294-01/19/11 14:04:17: 103=Rebuild progress on PD 01(e0x20/s1) is 57.00%(672s) 01/19/11 14:04:33: EVT#12295-01/19/11 14:04:33: 103=Rebuild progress on PD 01(e0x20/s1) is 58.23%(688s) 01/19/11 14:04:49: EVT#12296-01/19/11 14:04:49: 103=Rebuild progress on PD 01(e0x20/s1) is 59.46%(704s) 01/19/11 14:05:05: EVT#12297-01/19/11 14:05:05: 103=Rebuild progress on PD 01(e0x20/s1) is 60.69%(720s) 01/19/11 14:05:21: EVT#12298-01/19/11 14:05:21: 103=Rebuild progress on PD 01(e0x20/s1) is 61.91%(736s) 01/19/11 14:05:37: EVT#12299-01/19/11 14:05:37: 103=Rebuild progress on PD 01(e0x20/s1) is 63.13%(752s) 01/19/11 14:05:53: EVT#12300-01/19/11 14:05:53: 103=Rebuild progress on PD 01(e0x20/s1) is 64.31%(768s) 01/19/11 14:06:03: EVT#12301-01/19/11 14:06:03: 103=Rebuild progress on PD 03(e0x20/s3) is 4.99%(950s) 01/19/11 14:06:09: EVT#12302-01/19/11 14:06:09: 103=Rebuild progress on PD 01(e0x20/s1) is 65.45%(784s) 01/19/11 14:06:25: EVT#12303-01/19/11 14:06:25: 103=Rebuild progress on PD 01(e0x20/s1) is 66.59%(800s) 01/19/11 14:06:41: EVT#12304-01/19/11 14:06:41: 103=Rebuild progress on PD 01(e0x20/s1) is 67.72%(816s) 01/19/11 14:06:57: EVT#12305-01/19/11 14:06:57: 103=Rebuild progress on PD 01(e0x20/s1) is 68.86%(832s) 01/19/11 14:07:13: EVT#12306-01/19/11 14:07:13: 103=Rebuild progress on PD 01(e0x20/s1) is 69.99%(848s) 01/19/11 14:07:29: EVT#12307-01/19/11 14:07:29: 103=Rebuild progress on PD 01(e0x20/s1) is 71.12%(864s) 01/19/11 14:07:45: EVT#12308-01/19/11 14:07:45: 103=Rebuild progress on PD 01(e0x20/s1) is 72.24%(880s) 01/19/11 14:08:01: EVT#12309-01/19/11 14:08:01: 103=Rebuild progress on PD 01(e0x20/s1) is 73.36%(896s) 01/19/11 14:08:17: EVT#12310-01/19/11 14:08:17: 103=Rebuild progress on PD 01(e0x20/s1) is 74.49%(912s) 01/19/11 14:08:33: EVT#12311-01/19/11 14:08:33: 103=Rebuild progress on PD 01(e0x20/s1) is 75.61%(928s) 01/19/11 14:08:49: EVT#12312-01/19/11 14:08:49: 103=Rebuild progress on PD 01(e0x20/s1) is 76.71%(944s) 01/19/11 14:09:05: EVT#12313-01/19/11 14:09:05: 103=Rebuild progress on PD 01(e0x20/s1) is 77.81%(960s) 01/19/11 14:09:21: EVT#12314-01/19/11 14:09:21: 103=Rebuild progress on PD 01(e0x20/s1) is 78.87%(976s) 01/19/11 14:09:37: EVT#12315-01/19/11 14:09:37: 103=Rebuild progress on PD 01(e0x20/s1) is 79.96%(992s) 01/19/11 14:09:40: EVT#12316-01/19/11 14:09:40: 103=Rebuild progress on PD 03(e0x20/s3) is 5.99%(1167s) 01/19/11 14:09:53: EVT#12317-01/19/11 14:09:53: 103=Rebuild progress on PD 01(e0x20/s1) is 81.05%(1008s) 01/19/11 14:10:09: EVT#12318-01/19/11 14:10:09: 103=Rebuild progress on PD 01(e0x20/s1) is 82.11%(1024s) 01/19/11 14:10:25: EVT#12319-01/19/11 14:10:25: 103=Rebuild progress on PD 01(e0x20/s1) is 83.14%(1040s) 01/19/11 14:10:41: EVT#12320-01/19/11 14:10:41: 103=Rebuild progress on PD 01(e0x20/s1) is 84.17%(1056s) 01/19/11 14:10:57: EVT#12321-01/19/11 14:10:57: 103=Rebuild progress on PD 01(e0x20/s1) is 85.21%(1072s) 01/19/11 14:11:13: EVT#12322-01/19/11 14:11:13: 103=Rebuild progress on PD 01(e0x20/s1) is 86.23%(1088s) 01/19/11 14:11:29: EVT#12323-01/19/11 14:11:29: 103=Rebuild progress on PD 01(e0x20/s1) is 87.24%(1104s) 01/19/11 14:11:45: EVT#12324-01/19/11 14:11:45: 103=Rebuild progress on PD 01(e0x20/s1) is 88.21%(1120s) 01/19/11 14:12:01: EVT#12325-01/19/11 14:12:01: 103=Rebuild progress on PD 01(e0x20/s1) is 89.19%(1136s) 01/19/11 14:12:17: EVT#12326-01/19/11 14:12:17: 103=Rebuild progress on PD 01(e0x20/s1) is 90.16%(1152s) 01/19/11 14:12:33: EVT#12327-01/19/11 14:12:33: 103=Rebuild progress on PD 01(e0x20/s1) is 91.15%(1168s) 01/19/11 14:12:49: EVT#12328-01/19/11 14:12:49: 103=Rebuild progress on PD 01(e0x20/s1) is 91.95%(1184s) 01/19/11 14:12:56: EVT#12329-01/19/11 14:12:56: 103=Rebuild progress on PD 03(e0x20/s3) is 6.99%(1363s) 01/19/11 14:13:09: EVT#12330-01/19/11 14:13:09: 103=Rebuild progress on PD 01(e0x20/s1) is 92.95%(1204s) 01/19/11 14:13:26: EVT#12331-01/19/11 14:13:26: 103=Rebuild progress on PD 01(e0x20/s1) is 93.94%(1221s) 01/19/11 14:13:43: EVT#12332-01/19/11 14:13:43: 103=Rebuild progress on PD 01(e0x20/s1) is 94.94%(1238s) 01/19/11 14:14:00: EVT#12333-01/19/11 14:14:00: 103=Rebuild progress on PD 01(e0x20/s1) is 95.94%(1255s) 01/19/11 14:14:19: EVT#12334-01/19/11 14:14:19: 103=Rebuild progress on PD 01(e0x20/s1) is 96.94%(1274s) 01/19/11 14:14:38: EVT#12335-01/19/11 14:14:38: 103=Rebuild progress on PD 01(e0x20/s1) is 97.94%(1293s) 01/19/11 14:15:04: EVT#12336-01/19/11 14:15:04: 103=Rebuild progress on PD 01(e0x20/s1) is 98.94%(1319s) 01/19/11 14:15:36: EVT#12337-01/19/11 14:15:36: 103=Rebuild progress on PD 01(e0x20/s1) is 99.94%(1351s) 01/19/11 14:15:37: EVT#12338-01/19/11 14:15:37: 100=Rebuild complete on PD 01(e0x20/s1) 01/19/11 14:15:37: EVT#12339-01/19/11 14:15:37: 81=State change on VD 00/0 from DEGRADED(2) to OPTIMAL(3) 01/19/11 14:15:37: EVT#12340-01/19/11 14:15:37: 249=VD 00/0 is now OPTIMAL 01/19/11 14:15:37: EVT#12341-01/19/11 14:15:37: 114=State change on PD 01(e0x20/s1) from REBUILD(14) to ONLINE(18) 01/19/11 14:16:33: EVT#12342-01/19/11 14:16:33: 103=Rebuild progress on PD 03(e0x20/s3) is 7.99%(1580s) 01/19/11 14:19:57: EVT#12343-01/19/11 14:19:57: 103=Rebuild progress on PD 03(e0x20/s3) is 8.99%(1784s) 01/19/11 14:23:18: EVT#12344-01/19/11 14:23:18: 103=Rebuild progress on PD 03(e0x20/s3) is 9.99%(1985s) 01/19/11 14:26:44: EVT#12345-01/19/11 14:26:44: 103=Rebuild progress on PD 03(e0x20/s3) is 10.99%(2191s) 01/19/11 14:30:14: EVT#12346-01/19/11 14:30:14: 103=Rebuild progress on PD 03(e0x20/s3) is 11.99%(2401s) 01/19/11 14:34:03: EVT#12347-01/19/11 14:34:03: 103=Rebuild progress on PD 03(e0x20/s3) is 12.99%(2630s) 01/19/11 14:37:44: EVT#12348-01/19/11 14:37:44: 103=Rebuild progress on PD 03(e0x20/s3) is 13.99%(2851s) 01/19/11 14:41:37: EVT#12349-01/19/11 14:41:37: 103=Rebuild progress on PD 03(e0x20/s3) is 14.99%(3084s) 01/19/11 14:45:26: EVT#12350-01/19/11 14:45:26: 103=Rebuild progress on PD 03(e0x20/s3) is 15.99%(3313s) 01/19/11 14:48:59: EVT#12351-01/19/11 14:48:59: 103=Rebuild progress on PD 03(e0x20/s3) is 16.99%(3526s) 01/19/11 14:52:48: EVT#12352-01/19/11 14:52:48: 103=Rebuild progress on PD 03(e0x20/s3) is 17.99%(3755s) 01/19/11 14:56:40: EVT#12353-01/19/11 14:56:40: 103=Rebuild progress on PD 03(e0x20/s3) is 18.98%(3987s) 01/19/11 15:00:42: EVT#12354-01/19/11 15:00:42: 103=Rebuild progress on PD 03(e0x20/s3) is 19.98%(4229s) 01/19/11 15:04:33: EVT#12355-01/19/11 15:04:33: 103=Rebuild progress on PD 03(e0x20/s3) is 20.98%(4460s) 01/19/11 15:08:26: EVT#12356-01/19/11 15:08:26: 103=Rebuild progress on PD 03(e0x20/s3) is 21.98%(4693s) 01/19/11 15:12:31: EVT#12357-01/19/11 15:12:31: 103=Rebuild progress on PD 03(e0x20/s3) is 22.98%(4938s) 01/19/11 15:16:41: EVT#12358-01/19/11 15:16:41: 103=Rebuild progress on PD 03(e0x20/s3) is 23.98%(5188s) 01/19/11 15:20:32: EVT#12359-01/19/11 15:20:32: 103=Rebuild progress on PD 03(e0x20/s3) is 24.98%(5419s) 01/19/11 15:24:39: EVT#12360-01/19/11 15:24:39: 103=Rebuild progress on PD 03(e0x20/s3) is 25.98%(5666s) 01/19/11 15:29:12: EVT#12361-01/19/11 15:29:12: 103=Rebuild progress on PD 03(e0x20/s3) is 26.98%(5939s) 01/19/11 15:33:40: EVT#12362-01/19/11 15:33:40: 103=Rebuild progress on PD 03(e0x20/s3) is 27.98%(6207s) 01/19/11 15:37:30: EVT#12363-01/19/11 15:37:30: 103=Rebuild progress on PD 03(e0x20/s3) is 28.98%(6437s) 01/19/11 15:42:04: EVT#12364-01/19/11 15:42:04: 103=Rebuild progress on PD 03(e0x20/s3) is 29.98%(6711s) 01/19/11 15:46:49: EVT#12365-01/19/11 15:46:49: 103=Rebuild progress on PD 03(e0x20/s3) is 30.98%(6996s) 01/19/11 15:51:23: EVT#12366-01/19/11 15:51:23: 103=Rebuild progress on PD 03(e0x20/s3) is 31.98%(7270s) 01/19/11 15:56:01: EVT#12367-01/19/11 15:56:01: 103=Rebuild progress on PD 03(e0x20/s3) is 32.98%(7548s) 01/19/11 16:00:44: EVT#12368-01/19/11 16:00:44: 103=Rebuild progress on PD 03(e0x20/s3) is 33.98%(7831s) 01/19/11 16:05:48: EVT#12369-01/19/11 16:05:48: 103=Rebuild progress on PD 03(e0x20/s3) is 34.98%(8135s) 01/19/11 16:10:39: EVT#12370-01/19/11 16:10:39: 103=Rebuild progress on PD 03(e0x20/s3) is 35.98%(8426s) 01/19/11 16:16:01: EVT#12371-01/19/11 16:16:01: 103=Rebuild progress on PD 03(e0x20/s3) is 36.98%(8748s) 01/19/11 16:21:28: EVT#12372-01/19/11 16:21:28: 103=Rebuild progress on PD 03(e0x20/s3) is 37.97%(9075s) 01/19/11 16:26:59: EVT#12373-01/19/11 16:26:59: 103=Rebuild progress on PD 03(e0x20/s3) is 38.97%(9406s) 01/19/11 16:32:45: EVT#12374-01/19/11 16:32:45: 103=Rebuild progress on PD 03(e0x20/s3) is 39.97%(9752s) 01/19/11 16:38:45: EVT#12375-01/19/11 16:38:45: 103=Rebuild progress on PD 03(e0x20/s3) is 40.97%(10112s) 01/19/11 16:45:31: EVT#12376-01/19/11 16:45:31: 103=Rebuild progress on PD 03(e0x20/s3) is 41.97%(10518s) 01/19/11 16:51:56: EVT#12377-01/19/11 16:51:56: 103=Rebuild progress on PD 03(e0x20/s3) is 42.97%(10903s) 01/19/11 16:58:53: EVT#12378-01/19/11 16:58:53: 103=Rebuild progress on PD 03(e0x20/s3) is 43.97%(11320s) 01/19/11 17:05:43: EVT#12379-01/19/11 17:05:43: 103=Rebuild progress on PD 03(e0x20/s3) is 44.97%(11730s) 01/19/11 17:12:41: EVT#12380-01/19/11 17:12:41: 103=Rebuild progress on PD 03(e0x20/s3) is 45.97%(12148s) 01/19/11 17:19:48: EVT#12381-01/19/11 17:19:48: 103=Rebuild progress on PD 03(e0x20/s3) is 46.97%(12575s) 01/19/11 17:27:19: EVT#12382-01/19/11 17:27:19: 103=Rebuild progress on PD 03(e0x20/s3) is 47.97%(13026s) 01/19/11 17:34:46: EVT#12383-01/19/11 17:34:46: 103=Rebuild progress on PD 03(e0x20/s3) is 48.97%(13473s) 01/19/11 17:42:18: EVT#12384-01/19/11 17:42:18: 103=Rebuild progress on PD 03(e0x20/s3) is 49.97%(13925s) 01/19/11 17:50:36: EVT#12385-01/19/11 17:50:36: 103=Rebuild progress on PD 03(e0x20/s3) is 50.97%(14423s) 01/19/11 17:57:46: EVT#12386-01/19/11 17:57:46: 103=Rebuild progress on PD 03(e0x20/s3) is 51.97%(14853s) 01/19/11 18:05:31: EVT#12387-01/19/11 18:05:31: 103=Rebuild progress on PD 03(e0x20/s3) is 52.97%(15318s) 01/19/11 18:12:48: EVT#12388-01/19/11 18:12:48: 103=Rebuild progress on PD 03(e0x20/s3) is 53.97%(15755s) 01/19/11 18:21:21: EVT#12389-01/19/11 18:21:21: 103=Rebuild progress on PD 03(e0x20/s3) is 54.97%(16268s) 01/19/11 18:29:14: EVT#12390-01/19/11 18:29:14: 103=Rebuild progress on PD 03(e0x20/s3) is 55.97%(16741s) 01/19/11 18:37:35: EVT#12391-01/19/11 18:37:35: 103=Rebuild progress on PD 03(e0x20/s3) is 56.96%(17242s) 01/19/11 18:45:25: EVT#12392-01/19/11 18:45:25: 103=Rebuild progress on PD 03(e0x20/s3) is 57.96%(17712s) 01/19/11 18:53:14: EVT#12393-01/19/11 18:53:14: 103=Rebuild progress on PD 03(e0x20/s3) is 58.96%(18181s) 01/19/11 19:01:43: EVT#12394-01/19/11 19:01:43: 103=Rebuild progress on PD 03(e0x20/s3) is 59.96%(18690s) 01/19/11 19:08:56: EVT#12395-01/19/11 19:08:56: 103=Rebuild progress on PD 03(e0x20/s3) is 60.96%(19123s) 01/19/11 19:17:01: EVT#12396-01/19/11 19:17:01: 103=Rebuild progress on PD 03(e0x20/s3) is 61.96%(19608s) 01/19/11 19:24:43: EVT#12397-01/19/11 19:24:43: 103=Rebuild progress on PD 03(e0x20/s3) is 62.96%(20070s) 01/19/11 19:32:14: EVT#12398-01/19/11 19:32:14: 103=Rebuild progress on PD 03(e0x20/s3) is 63.96%(20521s) 01/19/11 19:39:58: EVT#12399-01/19/11 19:39:58: 103=Rebuild progress on PD 03(e0x20/s3) is 64.96%(20985s) 01/19/11 19:47:19: EVT#12400-01/19/11 19:47:19: 103=Rebuild progress on PD 03(e0x20/s3) is 65.96%(21426s) 01/19/11 19:54:30: EVT#12401-01/19/11 19:54:30: 103=Rebuild progress on PD 03(e0x20/s3) is 66.96%(21857s) 01/19/11 20:02:03: EVT#12402-01/19/11 20:02:03: 103=Rebuild progress on PD 03(e0x20/s3) is 67.96%(22310s) 01/19/11 20:09:11: EVT#12403-01/19/11 20:09:11: 103=Rebuild progress on PD 03(e0x20/s3) is 68.96%(22738s) 01/19/11 20:16:14: EVT#12404-01/19/11 20:16:14: 103=Rebuild progress on PD 03(e0x20/s3) is 69.96%(23161s) 01/19/11 20:23:16: EVT#12405-01/19/11 20:23:16: 103=Rebuild progress on PD 03(e0x20/s3) is 70.96%(23583s) 01/19/11 20:29:45: EVT#12406-01/19/11 20:29:45: 103=Rebuild progress on PD 03(e0x20/s3) is 71.96%(23972s) 01/19/11 20:36:12: EVT#12407-01/19/11 20:36:12: 103=Rebuild progress on PD 03(e0x20/s3) is 72.96%(24359s) 01/19/11 20:42:48: EVT#12408-01/19/11 20:42:48: 103=Rebuild progress on PD 03(e0x20/s3) is 73.96%(24755s) 01/19/11 20:49:46: EVT#12409-01/19/11 20:49:46: 103=Rebuild progress on PD 03(e0x20/s3) is 74.95%(25173s) 01/19/11 20:56:55: EVT#12410-01/19/11 20:56:55: 103=Rebuild progress on PD 03(e0x20/s3) is 75.95%(25602s) 01/19/11 21:03:47: EVT#12411-01/19/11 21:03:47: 103=Rebuild progress on PD 03(e0x20/s3) is 76.95%(26014s) 01/19/11 21:11:04: EVT#12412-01/19/11 21:11:04: 103=Rebuild progress on PD 03(e0x20/s3) is 77.95%(26451s) 01/19/11 21:18:02: EVT#12413-01/19/11 21:18:02: 103=Rebuild progress on PD 03(e0x20/s3) is 78.95%(26869s) 01/19/11 21:25:04: EVT#12414-01/19/11 21:25:04: 103=Rebuild progress on PD 03(e0x20/s3) is 79.95%(27291s) 01/19/11 21:32:13: EVT#12415-01/19/11 21:32:13: 103=Rebuild progress on PD 03(e0x20/s3) is 80.95%(27720s) 01/19/11 21:39:16: EVT#12416-01/19/11 21:39:16: 103=Rebuild progress on PD 03(e0x20/s3) is 81.95%(28143s) 01/19/11 21:47:20: EVT#12417-01/19/11 21:47:20: 103=Rebuild progress on PD 03(e0x20/s3) is 82.95%(28627s) 01/19/11 21:54:15: EVT#12418-01/19/11 21:54:15: 103=Rebuild progress on PD 03(e0x20/s3) is 83.95%(29042s) 01/19/11 22:01:50: EVT#12419-01/19/11 22:01:50: 103=Rebuild progress on PD 03(e0x20/s3) is 84.95%(29497s) 01/19/11 22:09:12: EVT#12420-01/19/11 22:09:12: 103=Rebuild progress on PD 03(e0x20/s3) is 85.95%(29939s) 01/19/11 22:17:05: EVT#12421-01/19/11 22:17:05: 103=Rebuild progress on PD 03(e0x20/s3) is 86.95%(30412s) 01/19/11 22:24:41: EVT#12422-01/19/11 22:24:41: 103=Rebuild progress on PD 03(e0x20/s3) is 87.95%(30868s) 01/19/11 22:32:20: EVT#12423-01/19/11 22:32:20: 103=Rebuild progress on PD 03(e0x20/s3) is 88.95%(31327s) 01/19/11 22:40:11: EVT#12424-01/19/11 22:40:11: 103=Rebuild progress on PD 03(e0x20/s3) is 89.95%(31798s) 01/19/11 22:47:49: EVT#12425-01/19/11 22:47:49: 103=Rebuild progress on PD 03(e0x20/s3) is 90.95%(32256s) 01/19/11 22:55:39: EVT#12426-01/19/11 22:55:39: 103=Rebuild progress on PD 03(e0x20/s3) is 91.95%(32726s) 01/19/11 23:03:51: EVT#12427-01/19/11 23:03:51: 103=Rebuild progress on PD 03(e0x20/s3) is 92.95%(33218s) 01/19/11 23:11:54: EVT#12428-01/19/11 23:11:54: 103=Rebuild progress on PD 03(e0x20/s3) is 93.94%(33701s) 01/19/11 23:19:39: EVT#12429-01/19/11 23:19:39: 103=Rebuild progress on PD 03(e0x20/s3) is 94.94%(34166s) 01/19/11 23:27:40: EVT#12430-01/19/11 23:27:40: 103=Rebuild progress on PD 03(e0x20/s3) is 95.94%(34647s) 01/19/11 23:35:25: EVT#12431-01/19/11 23:35:25: 103=Rebuild progress on PD 03(e0x20/s3) is 96.94%(35112s) 01/19/11 23:43:31: EVT#12432-01/19/11 23:43:31: 103=Rebuild progress on PD 03(e0x20/s3) is 97.94%(35598s) 01/19/11 23:51:02: EVT#12433-01/19/11 23:51:02: 103=Rebuild progress on PD 03(e0x20/s3) is 98.94%(36049s) 01/19/11 23:59:16: EVT#12434-01/19/11 23:59:16: 103=Rebuild progress on PD 03(e0x20/s3) is 99.94%(36543s) 01/19/11 23:59:39: EVT#12435-01/19/11 23:59:39: 100=Rebuild complete on PD 03(e0x20/s3) 01/19/11 23:59:39: EVT#12436-01/19/11 23:59:39: 81=State change on VD 01/1 from DEGRADED(2) to OPTIMAL(3) 01/19/11 23:59:39: EVT#12437-01/19/11 23:59:39: 249=VD 01/1 is now OPTIMAL 01/19/11 23:59:39: EVT#12438-01/19/11 23:59:39: 114=State change on PD 03(e0x20/s3) from REBUILD(14) to ONLINE(18) 01/20/11 9:02:08: shutdownBlockDone: wait for all IO to complete 01/20/11 9:02:08: shutdownBlockDone: IO complete; wait for host command 01/20/11 9:02:08: EVT#12439-01/20/11 9:02:08: 42=Shutdown command received from host T0: LSI Logic ROC firmware T0: Copyright (C) LSI Logic, 2004 T0: Firmware version 1.11.52-0396 built on Feb 1 2008 at 19:36:17 T0: pciInit: O_PCI_SERVICE = 00000005 T0: Initializing 1MB memory pool T0: Press '!' within 3 seconds to enter debugger before INIT T3: EVT#12440-T3: 0=Firmware initialization started (PCI ID 0060/1000/1f0c/1028) T3: EVT#12441-T3: 1=Firmware version 1.11.52-0396 T3: Authenticating RAID key: Done! T3: EepromInit: Family=33, SN=724554020000 T3: I2Chandle obtained for MUX [0]0x0 T3: I2Chandle obtained for MUX [1]0x10 T3: DRAM SIZE=256 MB T3: Environment data: T3: PHY_MAP=02_00;02_00;02_00;02_00;03_01;03_01;03_01;03_01 T3: PHY_GBAll=02090000;06000080;04000080;FFFFFFFF;00000000;00000000;00000000;00000000;00000000 T3: Connector_0=02_0 T3: Connector_1=02_1 T3: Connector_2=03_1 T3: Connector_3=03_0 T3: VERSIONS=BTBL_1.00.00.01-0008,APP_1.11.52-0396,BIOS_NT13-2,BCON_1.1-32-e_11-Rel,CTLR_1.01-010B T3: PACKAGE=6.0.2-0002 T3: Flashable=1000_0060_1028_1f0c T3: VALIDATION=GCA_02/01/08_17:45:43 T3: MFC data: T3: subVendorId/subDeviceId=1028/1f0c T3: OEM=2(Dell), clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0 T3: disableRaid5=0 T3: sasAddr=5001e4f036a68e00, phyPolarity=00 phyPolaritySplit 00 T3: backgroundRate=30, stripeSize=7(64K), flushTime=4 T3: writeBack=1, readAhead=0, cacheWhenBBUBad=0, cachedIo=0 T3: smartMode=0(6), alarmDisable=1, coercion=1(128M), zcrConfig=0(Undefined) T3: dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None) T3: allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=0, allowSataInCluster=0 T3: maxChainedEnclosures=1, disableCtrlR=0, enableWebBios=0, directPdMapping=1, biosEnumerateLds=1 T3: restoreHotSpareOnInsertion=0, exposeEnclosureDevices=0 T3: maintainPdFailHistory=0 disablePuncturing=0 zeroBasedEnclEnumeration=1 disableBootCLI=1 T3: quadPortConnectorMap=0 driveActivityLed=0 T3: MFC MFG data: T3: date=06/08/07, sn="1122334455667788", reworkDate=06/08/07, rev="" T3: No PHY_GB command was found in environment. So using default settings. T3: can_flush = 0 T3: Controller Properties: (All values are in hex) T3: seqNum=3, predFailPollInterval=12c, intThrottleCount=10 T3: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e T3: bgiRate=1e, ccRate=1e, reconRate=1e T3: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c T3: clusterEnable=0, coercionMode=1, alarmEnable=0 T3: disableAutoRebuild=0, disableBatteryWarning=0, eccBucketSize=f T3: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0 T3: exposeEnclosureDevices=0, maintainPdFailHistory=0 T3: disallowHostRequestReordering=0 T3: EVT#12442-T3: 141=Battery Present T3: *** BATTERY FEATURE PROPERTIES *** T3: _________________________________________________ T3: Auto Learn Period : 90 days T3: Next Learn Time : 355085518 T3: Battery ID : 383d0718 T3: Delayed Learn Interval: 0 hours from scheduled time T3: Next Learn cheduled on: 04 02 2011 T3: _________________________________________________ T3: *** BATTERY DESIGN INFORMATION *** T3: _____________________________________________ T3: Design Capacity : 1900 mAh T3: Design Voltage : 3700 mV T3: Specification Info, : 31 T3: Date of Manufacture : 1,29 2008 T3: Serial Number : 1816 T3: Pack Status-Config : e4bc T3: Manufacturer Name : SANYO T3: Device Name : DLU8735 T3: Device Chemistry : LION T3: Design Data : a0dbdd0f T3: _____________________________________________ T3: *** BATTERY CAPACITY INFORMATION *** T3: _____________________________________________ T3: Relative State of Charge : 97 % T3: Absolute State of Charge : 40 % T3: Remaining Capacity : 753 mAh T3: Full Charge Capacity : 779 mAh T3: Time to Empty : 65535 Min T3: Average Time to Empty : 65535 Min T3: Average Time to Full : 65535 Min T3: Cycle Count : 28 T3: Max Error : 0 % T3: _____________________________________________ T3: *** BATTERY MONITORED INFORMATION *** T3: ____________________________________________________________________________ T3: Temperature : 20 C Voltage : 4008 V T3: Current : 0 mA GasGaugeStat : c0 T3: GPID : a8ffb899 ChargerStatus : 1 T3: Remaining Capacity : 753 mAh Full Charge Capacity: 779 mAh T3: Relative Stat of Charge : 97 % FwBBUState : 1 T3: ____________________________________________________________________________ T3: Battery Init over T3: PdInit: PD_INFO entries are 220 bytes T3: LdInit: LD_INFO entryes are 200 bytes T3: EVT#12443-T3: 261=Package version 6.0.2-0002 T3: ready_list=a1500000 (29400 elements) T3: rebuild_list=a164a000 (8400 elements) T3: lines_info=a168c000 (28400 elements) T3: DISK_CACHE_ADDR=a1910000 T3: MEM_END_ADDR=affffff0 T3: Device Module Version 1.1 Date Feb 1 2008 Time 19:33:09 T3: DM_ChipInit: Total chips=1 T3: Chip=0 vendorId 1000 deviceId 0060 T3: Pl firmware version 1.21.75.0 T3: PL MID #0: msgNm=00000000, addr=014bfb00 T3: SgInIo Frame 11 SgInSg Frame 15 TotSg Frames 7fe Frame Size 100 T3: Waiting for PL Discovery to complete T4: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 0 DevHandle 1 Link 90 T4: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 1 DevHandle 2 Link 90 T4: Invalid Event 10010000, pEventReply=14f6d00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 20 Sas 5001e0f0:36a68e00 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 0 Sas 5000c500:03be5b11 T4: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T4: MPT_EventDeviceStatusChange: Device Inserted Tgt 1 Sas 5000c500:03bdbe01 T5: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T5: DM_DevMgrIsChipInit 0 State 1 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap ff - Discovery is in progress T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 2 DevHandle 3 Link 90 T17: MPI_EVENT_SAS_PHY_LINK_STATUS - PhyNum 3 DevHandle 4 Link 90 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 2 Sas 12210000:02000000 T17: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE T17: MPT_EventDeviceStatusChange: Device Inserted Tgt 3 Sas 12210000:03000000 T17: MPI_EVENT_SAS_DISCOVERY: PortBitmap 0 - Discovery is complete T17: DM_DevMgrIsChipInit 0 State 1 T21: Discovery completed in 17 seconds T21: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = a14ffdc0 size 90 T21: Hdr: ExtPageLength 0, ExtPageType 0 PageNumber 0 T21: PageType 0 PageVersion 0 NumPhys 8 T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=1 DiscSts=0 T21: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=2 DiscSts=0 T21: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=3 DiscSts=0 T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate9, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=4 DiscSts=0 T21: PHY4: Port=4, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY5: Port=5, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY6: Port=6, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: PHY7: Port=7, PortFlags=1, PhyFlags=0, NegRate0, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=5 DiscSts=0 T21: DISM: Queued! T21: DM_DevMgrIsChipInit 0 State 400 T21: DM: DM_DevSSUCallback TID 2 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: DM: DM_DevSSUCallback TID 3 FAILED Cnt 0 Retry 0 Status 2 T21: DM : DM_DevSSUCallback SENSE Len 12 Code 70 senseKey 6 asc 29 ascq 0 T21: I2c Enclosure found on port ffffffff T21: Connect Port Done !! T21: EVT#12444-T21: 164=Enclosure (SES) discovered on PD 20(c None/p0) T21: DM_DevNotifyRAID: Notify Done. Check for Removal T21: gDevInfo=a122e260, size=140 T21: Total Device = 5 T21: PD Flags State Type Size S NCQ Vendor Product Rev P C ID SAS Addr Port Phy DH T21: --- -------- ----- ---- -------- - --- -------- ---------------- ---- - - -- ---------------- ---- --- -- T21: 0 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 00 5000c50003be5b11 00 00 0a T21: 1 f0400005 00020 00 11177327 0 0 SEAGATE ST3146855SS S527 0 0 01 5000c50003bdbe01 01 01 0b T21: 2 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 02 1221000002000000 02 02 0c T21: 3 f0400005 00020 00 74706daf 1 1 ATA WDC WD10EADS-00L 1A01 0 0 03 1221000003000000 03 03 0d T21: 20 00400005 00020 0d 00000000 0 0 DP BACKPLANE 1.05 0 0 20 5001e0f036a68e00 09 08 09 T21: 100 00400005 00020 03 00000000 0 0 LSI SMP/SGPIO/SEP 0396 0 0 ff 0 00 ff 00 T21: DISM Complete T21: PhyId 0 Sas 5000c50003be5b11 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 5000c50003bdbe01 Type 1 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 1221000002000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 1221000003000000 Type 1 IsSata 1, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0 T21: DM_DevMgr become Ready- state e T21: EVT#12445-T21: 91=Inserted: Encl PD 20 T21: EVT#12446-T21: 247=Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f036a68e00,0000000000000000 T21: EVT#12447-T21: 91=Inserted: PD 00(e0x20/s0) T21: EVT#12448-T21: 247=Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50003be5b11,0000000000000000 T21: EVT#12449-T21: 91=Inserted: PD 01(e0x20/s1) T21: EVT#12450-T21: 247=Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50003bdbe01,0000000000000000 T21: EVT#12451-T21: 91=Inserted: PD 02(e0x20/s2) T21: EVT#12452-T21: 247=Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 T21: EVT#12453-T21: 236=PD 02(e0x20/s2) is not a certified drive T21: EVT#12454-T21: 91=Inserted: PD 03(e0x20/s3) T21: EVT#12455-T21: 247=Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 T21: EVT#12456-T21: 236=PD 03(e0x20/s3) is not a certified drive T21: Frames start at a0400000 T21: DDF_ConfigRead: perfect match found at pd=0, cod=a1019dc8 T21: DDF_ConfigRead: reference found at pd=0, merging config T21: DDF_Merge: copying bvd record for ld=0, span=0 from pd=0 at partition=0 T21: DDF_Merge: copying bvd record for ld=1, span=0 from pd=2 at partition=0 T21: missingSpan =0 T21: missingSpan =0 T21: ddfInitStatus: 0 T21: configRaid: adding to raid config T21: configRaidAddSpan: adding ld=0 span=0 T21: configRaidAddSpan: adding ld=1 span=0 T34: EVT#12457-T34: 81=State change on VD 01/1 from UNKNOWN(ff) to OPTIMAL(3) T34: EVT#12458-T34: 249=VD 01/1 is now OPTIMAL T34: Memory End affffff0 T34: Total memory available for disk cache: e6efbf0 T34: Total Number of Cache Lines 3648 T34: SS 128: ss=7 mrs=2 lc=3648 ldc=2 ps=4 cm=ff ba=0 LDs: 0 1 T34: Cache initialization complete...Config info T34: ARs configured: 2 T34: Ar 0: size=11040000, activeLd=1, numPd=2, seq=0, PDs: 00(20/0) 01(20/1) T34: Ar 1: size=74600000, activeLd=2, numPd=2, seq=0, PDs: 02(20/2) 03(20/3) T34: LD 0: L=1 SS=128 Size=11040000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=00,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T34: span 0: sBlk=00000000, nBlk=11040000, ar=0 T34: LD 1: L=1 SS=128 Size=74600000 NL=3648 Status=3 DT=1605 BT=2538, prop=[ID=01,dcp=05,ccp=05,ap=0,dc=1,dbgi=0] T34: span 0: sBlk=00000000, nBlk=74600000, ar=1 T34: Contiguous Triplet Usage: SS[64K]=0 T34: pdFailHistInit: count=0 T34: pdFailHistInit: count=0 T34: Initializing write journal entries T34: NOT Flushing Cache T34: RMW: NVRAM structure valid - checking for active RMWs T34: DDF_TimestampGet: using nvram time=01/20 9:02:09 + rtc=34 to set timestamp 01/20/11 9:02:49: EVT#12459-01/20/11 9:02:49: 44=Time established as 01/20/11 9:02:49; (35 seconds since power on) 01/20/11 9:03:22: EVT#12460-01/20/11 9:03:22: 149=Battery temperature is normal 01/20/11 9:03:22: EVT#12461-01/20/11 9:03:22: 163=Current capacity of the battery is above threshold 01/20/11 9:03:23: MfiCmdInitQueue: FW now OPERATIONAL 01/20/11 9:03:23: q.flags.mfaIs64Bits=0, q.flags.contextIs64Bits=0 01/20/11 9:03:23: q.responseQueueEntries=3f0, responseQueueStatr=cf574000 01/20/11 9:03:23: q.producerIndexPtr=cf400000, q.consumerIndexPtr=cf401000 01/20/11 9:03:23: producerIndex=0 Exit Code: 0x00